697439
7
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
Correcting burner faults | 7
6 720 812 901 (2014/10)Uni 3000 F
6 Correcting burner faults
The display shows heating system faults. Further information on the
fault displays can be found in the operating instructions of the relevant
control unit. In addition, burner faults are signalled by an indicator on the
burner.
Press burner reset button (see burner operating instructions).
If the burner still fails to start after three attempts, contact a suitably
qualified contractor.
7 Inspection and maintenance
7.1 What makes regular maintenance important?
Have your heating system regularly serviced:
to maintain a high level of efficiency and to operate the system
economically (low fuel consumption),
to achieve a high level of operational reliability,
to maintain the cleanest possible combustion.
7.2 When do you need to check the water pressure in your
heating system?
Recently added fill or top-up water loses much of its volume in the first
few days because it naturally releases gases. With new systems you
should therefore initially check the heating water pressure on a daily
basis, and then at gradually longer intervals.
Once the heating system is hardly losing any volume, check the
heating water pressure monthly.
A distinction is generally made between open vented and sealed
unvented systems. In practice, open vented systems are rarely installed
nowadays. We will therefore be using a sealed unvented heating system
to demonstrate how you can check the water pressure. All settings will
have already been made by the installation engineer when the system
was first commissioned.
NOTICE: Risk of system damage through frost.
When there is a frost, your heating system can freeze up
if it is shut down, e.g. through a fault shutdown.
If your heating system has been shut down for several
days due to a fault shutdown and there is a risk of
frost, drain the heating water at the drain & fill valve.
Also leave the air vent valve at the highest point in the
system open.
NOTICE: System damage due to the reset button being
pressed too frequently.
This can damage the burner ignition transformer.
Press the reset button no more than three times in a
row.
NOTICE: System damage through absence of or faulty
cleaning and maintenance.
Have the heating system inspected and cleaned by a
contractor annually. Check that the complete heating
system operates correctly.
Immediately correct all faults to prevent system
damage.
We recommend you enter a contract covering an
annual inspection and service subject to demand.
Annual inspection and service are part of the warranty
terms and conditions.
Use only genuine spare parts from the manufacturer.
Spare parts can be ordered via spare parts merchants.
A spare parts list is available online (see last page for
details).
The fill and top-up water quality must comply with the
specifications in the operator's log supplied.
Air pockets may form in the heating system through the
fill or top-up water releasing gases.
Vent the heating system (e.g. bleeding the radiators).
If required, top up with water.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch Uni 3000 F bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch Uni 3000 F in de taal/talen: Engels als bijlage per email.

De handleiding is 0,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bosch Uni 3000 F

Bosch Uni 3000 F Installatiehandleiding - English - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info