458020
20
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
20
TR 200
English
The present day is set by depressing the but-
tons “–” (o) or “+” (p).
If afterwards you wish to set the time, depress
the button (q).
When no more alterations are necessary
close the lid.
6.2.4Control knob set to
“Heating”
Setting the heating programme
The time switch makes it possible to automat-
ically switch on the heating system up to three
times a day at a pre-determined time and to
automatically switch it off three times a day a
pre-determined time.
Those times can be determined individually
for each day.
It is also possible to set the same times for
each day.
To make programming more effective it is
useful to fill in the heating times into the table
provided (see chapter 10). The heating pro-
gramme which is used for most days of the
week (also applicable if the times deviate
slightly) should be filled in for all days in the
first step. The deviating times can later be ef-
fortlessly altered.
Turn the control knob (n) to . The display (e)
shows:
Select day +/-
Depress the button “–” (o) or “+” (p). All days
(or the present day) is displayed in the upper
line.
In the setting
All days both “heating operation”
and “economic operation” will start at the re-
spective times each day.
If only one day of the week (e.g. Thursday)
was selected, the set programme for this day
always starts at the pre-set time on this day,
i.e. each Thursday both “heating operation”
and “economic operation” will start at the set
times.
One single day can be set by depressing the
buttons “–” (o) or “+” (p).
Between
Sunday and Monday All days is dis-
played.
The heating times can be set for the displayed
day/all days. For this, depress the button
(q).
The display (e) shows:
1. Start heating
6:00
The required first starting time for heating is
set by depressing the button “–” (o) or “+” (p).
Briefly depressing the button alters the start-
ing time by 10 minutes, when the button is de-
pressed for a longer period the time runs fast-
er forward or backward.
When the required starting time is selected
depress the button (q).
Now the respective first starting time for eco-
nomic operation must be set.
The display (e) shows:
1. Start econom.
22:00
The required first starting time for economic
operation is set by depressing the button
“–” (o) or “+” (p).
Briefly depressing the button alters the start-
ing time for economic operation by 10 min-
utes, when the button is depressed for a long-
er period the time runs faster forward or back-
ward.
As soon as the required starting time for eco-
nomic operation is selected depress the but-
ton (q).
The display (e) shows:
2. Start heating
--:--
Note: --:-- means that this starting time was
not programmed, i.e. only one start-
ing time for heating operation and
one for economic operation is pro-
grammed at initial operation (factory
pre-setting) or after a longer power
failure.
If required, the second starting time for heat-
ing operation can now be set as described
above, in the chapter “setting the first starting
time”.
20

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bosch-TR-200

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch TR 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch TR 200 in de taal/talen: Nederlands als bijlage per email.

De handleiding is 1,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bosch TR 200

Bosch TR 200 Snelstart handleiding - Deutsch - 1 pagina's

Bosch TR 200 Gebruiksaanwijzing en installatiehandleiding - Deutsch - 46 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info