112553
11
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
11
Use
The position of the programme selector
switch should not be changed during the
ironing process.
Changing the position of the programme
selector switch during the ironing process
does not alter the original programme
setting.
In order to fix the result of the ironing process,
the ironing dummy blows cold air for the last
minute of the ironing cycle.
When the ironing process comes to an end, a
sound signal is emitted and the light indicating
the “start / stop” function goes out.
Pausing the ironing process
The ironing process can be paused to stop the
ironing process, e.g. to correct the width of the
ironing dummy. To do this:
Press “start/stop“ while the ironing cycle is
under way.
The ironing process stops and the airing
motor turns itself off. The “start/stop”
indicator light flashes for 30 seconds. The
ironing programme can be started again at
any time during this period.
Adjust as desired.If you press Start/Stop
again during this period, the appliance
continues the cycle from where it left off.
If the 30-second time limit is exceeded, the
“start/stop” function light goes out: the
programme has finalised. It is necessary to
start a new ironing cycle.
If you change the position of the
programme selector switch while on
pause, the pause option is disabled and it
is necessary to reprogramme the
appliance. The previously-selected
programme is interrupted.
End of the ironing process
When the minute of cooling comes to an end,
a sound signal is emitted and the programme
finalises.
The ironing dummy slowly deflates.
Set the collar adjuster knob to vertical.
Open all the flaps on the button band
adjuster and on the collar support.
Open all of the flaps on the button band
adjuster and the collar support.
Release the cuff adjusters and pull them out
of the stretched shirtsleeves.
Leave the shirt to cool on a hanger to help
fix the results of the ironing process.
The next shirt can now be fitted onto the
appliance ready for the ironing process to
begin again.
Ironing/Airing
Warning!
Foreign objects (e.g. pens, clips) may
damage the garment and/or the ironing
dummy.
Do not air knitwear or elasticated
garments! They may loose shape.
Only air non-elasticated, cloth garments.
There are two ironing/airing programmes to
choose from: cold and hot, see Airing in
“Preparing your garments”.
Empty all the pockets on the garment to be
aired.
Fit the garment onto the appliance and
secure it as described in the “ironing”
section. See “Use”.
If the garment is a jacket, then it is not
necessary to secure the cuffs. Remove the
cuff adjusters if necessary.
Selected the desired airing programme with
the programme selector switch. See “Use”.
Press “start/stop“. The start/stop light lights
up. The ironing dummy inflates and the
airing process begins.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch THB 1500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch THB 1500 in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 2,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info