532235
40
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
36
Robert Bosch Hausgeräte GmbH
en
Water filter
A new water  lter 27 must be rinsed before
it can be used.
To do this, press the water  lter 27 rmly
into the water tank 11 with the aid of the
measuring spoon 14. Fill the water tank
with water up to the “max” mark.
Turn the rotary knob 6 to select start
and press the start button 8.
Place 1 l container
Place suction pipe in container
start
Place a container with a capacity of 1 litre
under the milk frother 10.
Place the end of the suction pipe 10d in
the container.
Press the start button 8. Water will now
ow through the  lter 27 to rinse it.
Next, empty the container.
The appliance is ready for use again.
Info: Rinsing the  lter 27 simultaneously
activates the setting for the “change  lter”
display.
You can  nd detailed information about the
water  lter in the enclosed  lter instructions.
The  lter 27 is no longer effective when the
Service - change filter display appears,
or at the latest after two months. It needs to
be replaced for reasons of hygiene and so
that there is no build-up of limescale (this
could damage the appliance).
Replacement  lters can be obtained from
retailers (TCZ7003) or from customer
service (575491).
If no new  lter 27 is used, turn the
Waterfilter setting to no.
Info: If the appliance has not been used
for a prolonged period (for example, when
you are on vacation), the existing  lter 27
should be rinsed before the appliance is
used again. To do this, simply dispense a
cup of hot water.
Transport. lock
To avoid damage caused by frost during
transport and storage, the appliance must
be completely emptied  rst.
Info: The appliance must be ready for use
and the water tank 11 lled.
Press the start button 8. The appliance
automatically empties the pipe system
and switches off.
Empty the water tank 11 and the
drip tray 23.
Factory reset
You can cancel your own settings and reset
the factory settings.
To activate the factory settings, press the
start button 8.
Info: The appliance can also be reset to
the factory settings using a combination of
buttons. The appliance must be switched
off fully.
Hold down the selection buttons < and
> 4 and the on/off switch 1 O / I at the
same time for at least 5 seconds. Press
the start button 8. The factory settings
are now reactivated.
TES803F_MK.indb 36 08.05.2013 12:21:11
40

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch TES803F9 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch TES803F9 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 5,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info