en
28
Transportation
Empty the dishwasher and secure loose
parts.
Drain the appliance according to the
following steps:
– Turn on the tap.
– Open the door.
–Switch on ON/OFF switch (. The
displays of the last selected
programme light up.
– Select programme with the highest
temperature.
The expected programme duration is
indicated on the numerical display
h.
– Press START button `.
– Close the door.
Programme sequence starts.
– Open door after approx. 4 minutes.
– Press START button ` until ‹:‹‚ is
indicated on the digital display.
– Close the door.
– Open door after approx. 1 minute.
The numerical display indicates ‹:‹‹.
– Switch the appliance off ( and turn
the tap off.
Transport appliance upright only.
(This prevents residual water from running
into the machine control and damaging
the programme sequence.)
Protection against frost (Emptying the appliance)
Protection against frost
If the appliance is in a room where there is
a risk of frost (e.g. holiday home), empty
the appliance completely (see
Transportation).
– Turn off the tap, disconnect supply
hose and drain water.
Both the packaging of new appliances and
the old appliances themselves contain
valuable raw materials and recyclable
materials.
Please dispose of the individual parts
separated according to type.
Please ask your dealer or inquire at your
local authority about current means of
disposal.
Packaging
All plastic parts of the appliance are
identified with internationally standardised
abbreviations (e.g. >PS< polystyrene).
Therefore, plastic waste can be sorted out
when the appliance is being disposed of.
Please follow the safety instructions under
“Delivery”.
Old appliances
Please follow the safety instructions under
“Disposal of your appliance”.
Waste disposal
This appliance is identified
according to the European
guideline 2002/96/EC on waste
electrical and electronic equipment
– WEEE. The guideline specifies
the framework for an EU-wide valid
return and re-use of old
appliances.
