773239

Bosch SMS4HDW52G Handleiding

43
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
Register your
new device on
MyBosch now and
get free benefits:
bosch-home.com/
welcome
Dishwasher
SMS4HDW52G
[en] User manual
en
2
Table of contents
Safety ...............................................4
General information..........................4
Intended use.....................................4
Restriction on user group.................4
Safe installation ................................4
Safe use ...........................................6
Damaged appliance.........................7
Risk to children ................................8
Preventing material damage ........10
Safe installation ..............................10
Safe use .........................................10
Environmental protection and
saving energy................................11
Disposing of packaging .................11
Saving energy.................................11
AquaSensor....................................11
Installation and connection..........11
Scope of supply .............................11
Installing and connecting the ap-
pliance............................................12
Drainage connection ......................12
Drinking water connection .............12
Electrical connection ......................12
Familiarising yourself with
your appliance...............................14
Appliance .......................................14
Controls ..........................................15
Programmes ..................................17
Information for test institutes ..........18
Favourite ....................................18
Additional functions .....................19
Features.........................................19
Top basket......................................20
Bottom basket ................................21
Cutlery basket ................................21
3rd basket ......................................21
Etagere ...........................................22
Folding prongs ...............................22
Knife shelf.......................................23
Baking sheet spray head ...............23
Extra Clean Zone ...........................23
Basket heights................................24
Before using for the first time ......25
Performing the initial configura-
tion..................................................25
Water softening system................25
Overview of water hardness set-
tings................................................25
Setting the water softening sys-
tem .................................................26
Special salt.....................................26
Switching off the water softening
system ............................................27
Regeneration of the water
softening system ............................27
Rinse aid system...........................28
Rinse aid ........................................28
Setting the amount of rinse aid......28
Switching the rinse aid system
off ...................................................29
Detergent .......................................29
Suitable detergents ........................29
Unsuitable detergents ....................30
Information on detergents ..............30
Adding detergent ...........................31
Tableware ......................................31
Damage to glass and tableware ....32
Arrange tableware..........................32
Removing tableware.......................33
Basic operation .............................33
Switching on the appliance ............33
Setting a programme .....................34
Setting additional functions ............34
Setting timer programming ............34
Starting the programme .................34
en
3
Activating button lock.....................34
Deactivate button lock....................34
Interrupting programme .................34
Terminate programme....................35
Switching off appliance ..................35
Basic settings................................36
Overview of basic settings .............36
Changing basic settings.................37
HomeConnect ..............................37
HomeConnect quick start .............38
HomeConnect settings..................38
Remote Start ............................38
Remote Diagnostics ......................39
Software update .............................39
Data protection...............................39
Cleaning and servicing.................40
Cleaning the tub.............................40
Cleaning products..........................40
Tips on appliance care...................40
Machine Care ..........................40
Filter system ...................................41
Cleaning spray arms ......................42
Troubleshooting............................44
Error code / Fault display / Sig-
nal...................................................44
Washing results..............................46
Home Connect problem.................53
Information on display panel..........53
Malfunctions ...................................54
Mechanical damage.......................55
Noise ..............................................55
Clean wastewater pump.................56
Transportation, storage and
disposal .........................................56
Removing the appliance ................56
Protect appliance from frost...........57
Transporting the appliance ............57
Disposing of old appliance ............57
Customer Service..........................57
Product number (E-Nr.), produc-
tion number (FD) and consecut-
ive numbering (Z-Nr.) .....................58
Technical specifications...............58
Information regarding Free and
Open Source Software ...................59
Declaration of Conformity ..............59
en Safety
4
Safety
Observe the following safety instructions.
General information
¡Read this instruction manual carefully.
¡Keep the instruction manual and the product information safe
for future reference or for the next owner.
¡Do not connect the appliance if it has been damaged in transit.
Intended use
Only use this appliance:
¡For cleaning household tableware.
¡In private households and in enclosed spaces in a domestic en-
vironment.
¡Up to an altitude of max. 4000m above sea level.
Restriction on user group
This appliance may be used by children aged 8 or over and by
people who have reduced physical, sensory or mental abilities or
inadequate experience and/or knowledge, provided that they are
supervised or have been instructed on how to use the appliance
safely and have understood the resulting dangers.
Children must not play with the appliance.
Cleaning and user maintenance must not be performed by chil-
dren unless they are being supervised.
Keep children under the age of 8 years away from the appliance
and power cable.
Safe installation
Follow these safety instructions when installing the appliance.
WARNING‒Risk of injury!
Improper installation may cause injury.
▶When installing and connecting the appliance, follow the in-
structions in the manual and installation instructions.
Safety en
5
WARNING‒Risk of electric shock!
Incorrect installation is dangerous.
▶Connect and operate the appliance only in accordance with
the specifications on the rating plate.
▶Always use the supplied power cable for the new appliance.
▶Connect the appliance to a power supply with alternating
current only via a properly installed socket with earthing.
▶The protective conductor system of the domestic electrical
installation must be properly installed.
▶Never equip the appliance with an external switching
device, e.g. a timer or remote control.
▶When the appliance is installed, the mains plug of the
power cord must be freely accessible. If free access is not
possible, an all-pole isolating switch must be installed in the
permanent electrical installation according to the installation
regulations.
▶When installing the appliance, check that the power cable is
not trapped or damaged.
WARNING‒Risk of fire!
It is dangerous to use an extended power cord and non-ap-
proved adapters.
▶Do not use extension cables or multiple socket strips.
▶If the power cord is too short, contact Customer Service.
▶Only use adapters approved by the manufacturer.
WARNING‒Risk of burns!
If the appliance is not installed properly, this may result in
burns.
▶With free-standing appliances, ensure that they are installed
with the back panel against a wall.
en Safety
6
Safe use
WARNING‒Risk of serious harm to health!
Failure to comply with safety instructions and directions for
use on packagings of detergent and rinse aid products may
cause serious harm to health.
▶Follow the safety instructions and directions for use on the
packagings of detergent and rinse aid products.
WARNING‒Risk of explosion!
¡Adding solvents to the interior of the appliance may cause ex-
plosions.
▶Never add solvents to the interior of the appliance.
¡Highly caustic alkaline or highly acidic cleaning agents in con-
junction with aluminium parts in the interior of the appliance
may cause explosions.
▶Never use highly caustic alkaline or highly acidic cleaning
agents, in particular commercial or industrial products, in
conjunction with aluminium parts (e.g. grease filters of ex-
tractor hoods or aluminium pans), e.g. for the Machine Care
programme.
WARNING‒Risk of injury!
¡Leaving the appliance door open may result in injury.
▶Only open the appliance door to load or unload tableware
in order to prevent accidents, e.g. through tripping.
▶Do not sit or stand on the appliance door when open.
¡Knives and utensils with sharp points can cause injuries.
▶Arrange knives and utensils with sharp points in the cutlery
basket with the points downwards, on the knife shelf or in
the cutlery drawer.
WARNING‒Risk of scalding!
If you open the appliance door while the programme is run-
ning, hot water may splash out of the appliance.
▶Open the appliance door carefully if the programme is still
running.
Safety en
7
WARNING‒Risk of tipping!
Overfilling the Baskets may cause the appliance to tip up.
▶Never overfill the Baskets with free-standing appliances.
WARNING‒Risk of electric shock!
¡An ingress of moisture can cause an electric shock.
▶Only use the appliance in enclosed spaces.
▶Never expose the appliance to intense heat or humidity.
▶Do not use steam- or high-pressure cleaners to clean the
appliance.
¡If the insulation of the power cord is damaged, this is danger-
ous.
▶Never let the power cord come into contact with hot appli-
ance parts or heat sources.
▶Never let the power cord come into contact with sharp
points or edges.
▶Never kink, crush or modify the power cord.
Damaged appliance
Follow the safety instructions if the appliance is damaged.
WARNING‒Risk of electric shock!
¡If the appliance or the power cord is damaged, this is danger-
ous.
▶Never operate a damaged appliance.
▶Never operate an appliance with a cracked or fractured sur-
face.
▶Never pull on the power cord to unplug the appliance. Al-
ways unplug the appliance at the mains.
▶If the appliance or the power cord is damaged, immediately
unplug the power cord or switch off the fuse in the fuse box
and turn off the water tap.
▶"Call Customer Service." →Page57
▶Repairs to the appliance should only be carried out by
trained specialist staff.
en Safety
8
¡Incorrect repairs are dangerous.
▶Repairs to the appliance should only be carried out by
trained specialist staff.
▶Only use genuine spare parts when repairing the appliance.
▶If the power cord of this appliance is damaged, it must be
replaced with a special connection cable, which is available
from the manufacturer or his Customer Service.
Risk to children
Follow the safety instructions if there are children in your home.
WARNING‒Risk of suffocation!
¡Children may put packaging material over their heads or wrap
themselves up in it and suffocate.
▶Keep packaging material away from children.
▶Do not let children play with packaging material.
¡Children may breathe in or swallow small parts, causing them
to suffocate.
▶Keep small parts away from children.
▶Do not let children play with small parts.
WARNING‒Risk of harm to health!
Children can lock themselves in the appliance, thereby putting
their lives at risk.
▶With redundant appliances, unplug the power cord. Then
cut through the cord and damage the lock on the appliance
door beyond repair so that the appliance door will no longer
close.
WARNING‒Risk of crushing!
With higher-level appliances, children can become crushed
between the appliance door and cabinet doors underneath.
▶Keep an eye on children when opening and closing the ap-
pliance door.
Safety en
9
WARNING‒Risk of chemical burns!
Rinse aid and detergent may cause chemical burns to the
mouth, throat and eyes.
▶Keep children away from detergent and rinse aid products.
▶Keep children away from the appliance when open. The wa-
ter in the interior of the dishwasher is not drinking water. It
may contain residues of detergents and rinse aid.
WARNING‒Risk of injury!
Children may get their fingers caught in the slots of the tablet
collecting tray and injure themselves.
▶Keep children away from the appliance when open.
WARNING‒Risk of suffocation!
Children may become trapped in the appliance and suffocate.
▶Use the childproof lock if fitted.
▶Never let children play with or operate the appliance.
en Preventing material damage
10
Preventing material damage
Preventing material dam-
age
Preventing material damage
Safe installation
Follow the instructions when installing
the appliance.
ATTENTION!
¡Improper installation of the appli-
ance may cause damage.
▶If the dishwasher is installed
above or below other domestic
appliances, follow the informa-
tion on installation in combina-
tion with a dishwasher in the in-
stallation instructions for the in-
dividual appliances.
▶If there is no information or if the
installation instructions do not in-
clude the relevant information,
contact the manufacturer of
these appliances to check that
the dishwasher can be installed
above or below these appli-
ances.
▶If no information is available
from the manufacturer, the dish-
washer should not be installed
above or below such appli-
ances.
▶To ensure the safe operation of
all domestic appliances, con-
tinue following the installation in-
structions for the dishwasher.
▶Do not install the dishwasher un-
der a hob.
▶Do not install the dishwasher
near heat sources, e.g. radiat-
ors, heat storage tanks, ovens
or other appliances that gener-
ate heat.
¡Modified or damaged water hoses
may result in material damage and
damage to the appliance.
▶Never kink, crush, modify or cut
through water hoses.
▶Only use the water hoses sup-
plied with the appliance or genu-
ine spare hoses.
▶Never re-use water hoses that
have been used before.
¡If the water pressure is too high or
too low, the appliance may not be
able to operate properly.
▶Make sure that the water pres-
sure in the water supply system
is min. 50kPa (0.5bar) and
max. 1000kPa (10bar).
▶If the water pressure exceeds
the maximum value specified, a
pressure-reducing valve must be
installed between the drinking
water connection and the hose
set of the appliance.
Safe use
Follow the instructions when using
the appliance.
ATTENTION!
¡Escaping water vapour can dam-
age fitted units.
▶When the programme ends,
leave the appliance to cool
down for a while before opening
the door.
¡Special salt for dishwashers can
damage the tub due to corrosion.
▶To make sure that any special
salt that escapes is washed out
of the tub, add the special salt
to the dispenser for special salt
immediately before the pro-
gramme starts.
¡Detergent may damage the water
softening system.
▶Only fill the dispenser of the wa-
ter softening system with special
dishwasher salt.
¡Unsuitable cleaning agents may
damage the appliance.
▶Do not use a steam cleaner.
Environmental protection and saving energy en
11
▶So as not to scratch the finish
on the appliance, do not use
sponges with a rough surface or
abrasive cleaning agents.
▶To prevent corrosion, do not use
sponge cloths on dishwashers
with a stainless steel front or
rinse such cloths thoroughly
several times before using them
for the first time.
Environmental protection and saving energy
Environmental protection
and saving energy
Environmental protection and saving energy
Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
▶Sort the individual components by
type and dispose of them separ-
ately.
Saving energy
If you follow these instructions, your
appliance will use less electricity and
less water.
Use the Eco50° programme.
The Eco50° programme is en-
ergy-efficient and environmentally
friendly.
→"Programmes", Page17
If you do not have much tableware to
wash, use the additional Half Load
function.1
The programme will adjust to a
lower load and consumption will
be reduced.
→"Additional functions", Page19
AquaSensor
The AquaSensor is an optical meas-
uring device (light barrier) which
measures the turbidity of the rinsing
water. You can save water with the
AquaSensor.
Use of the AquaSensor depends on
the programme. If the soiling level is
high, the rinsing water is drained off
and replaced with fresh water. If the
soiling level is lower, the rinsing wa-
ter is used in the next wash cycle, so
reducing water consumption by 3-6
litres. In the automatic programmes
the temperature and run time are ad-
ditionally adjusted to the level of soil-
ing.
Installation and connection
Installation and connec-
tion
Installation and connection
Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note:The appliance has been tested
at the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡Dishwasher
¡Operating instructions
¡Installation Instructions
¡Warranty
¡Installation material
¡Inlet hose
1Depending on the appliance specifications
en Installation and connection
12
¡Salt filling aid funnel
¡Mains cable
¡Quick reference guide
Installing and connecting the
appliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
1. "Follow the safety instructions."
→Page4
2. "Follow the instructions for elec-
trical connection." →Page12
3. Check the Scope of supply and
the condition of the appliance.
4. Consult the installation instructions
for the installation dimensions re-
quired.
5. Make the appliance level using the
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
6. "Install the drainage connection."
→Page12
7. "Install the drinking water connec-
tion." →Page12
8. Connect the appliance to the
power supply.
Drainage connection
Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage connection
1. Consult the installation instructions
supplied for the steps required
here.
2. Connect the wastewater hose to
the outlet connection of the siphon
using the enclosed parts.
3. When doing so, check that the
wastewater hose is not kinked,
crushed or twisted.
4. Also check that there is no cover
in the drainage system preventing
the wastewater from being dis-
charged.
Drinking water connection
Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note
¡If you are replacing the appliance,
you must use a new water supply
hose.
1. Consult the installation instructions
supplied for the steps required
here.
2. Connect the appliance to the drink-
ing water connection using the en-
closed parts.
Observe the "Technical data"
→Page58.
3. When doing so, check that the
drinking water connection is not
kinked, crushed or twisted.
Electrical connection
Connect your appliance to the power
supply.
Connecting the appliance to the
electricity supply
Notes
¡Please follow the "Safety instruc-
tions" →Page4.
¡Connect the appliance to alternat-
ing current only, in the range of
220 - 240V and 50Hz or 60Hz.
Installation and connection en
13
¡Please note that the water safety
system is only functional if there is
a power supply.
1. Insert the non-heating appliance
plug of the power cable into the
appliance.
2. Insert the mains plug of the appli-
ance into a nearby socket.
The connection data for the appli-
ance can be found on the rating
plate.
3. Check that the mains plug is inser-
ted properly.
en Familiarising yourself with your appliance
14
Familiarising yourself with your appliance
Familiarising yourself with your appliance
Familiarising yourself with your appliance
Appliance
You can find an overview of the parts of your appliance here.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
Rating plate Rating plate with "E number and FD number"
→Page58.
The data you need for "Customer Service"
→Page57.
1Depending on the appliance specifications
Familiarising yourself with your appliance en
15
2
Detergent dispenser "Detergent" →Page29 is added to the detergent
dispenser.
3
Bottom basket "Bottom basket" →Page21
4
Dispenser for special salt Add the special salt to the dispenser for special salt.
→"Water softening system", Page25
5
Lower spray arm The lower spray arm washes the tableware in the bot-
tom basket.
If the tableware has not been washed properly, clean
the spray arms.
→"Cleaning spray arms", Page42
6
Tablet collecting tray During the wash cycle tablets automatically fall out of
the detergent dispenser into the tablet collecting tray
where they can fully dissolve.
7
Top basket "Top basket" →Page20
8
3rd basket "3rd basket" →Page21
9
Cutlery shelf1"Cutlery shelf" →Page22
10
Upper spray arm The upper spray arm washes the tableware in the top
basket.
If the tableware has not been washed properly, clean
the spray arms.
→"Cleaning spray arms", Page42
11
Filter system "Filter system" →Page41
12
Cutlery basket "Cutlery basket" →Page21
13
Dispenser for rinse aid Add rinse aid to the dispenser for rinse aid.
→"Rinse aid system", Page28
1Depending on the appliance specifications
Controls
You can use the control panel to configure all functions of your appliance and
to obtain information about the operating status.
With some buttons you can perform different functions.
en Familiarising yourself with your appliance
16
1 2 3 4 5 6 7 8
910111213
1
ON/OFF button and reset button "Switching on the appliance" →Page33
"Switching off the appliance" →Page35
"Terminating the programme" →Page35
2
Programme buttons "Programmes" →Page17
3
Special salt refill indicator "Water softening system" →Page25
4
Rinse aid refill indicator "Rinse aid system" →Page28
5
WLAN display "Home Connect" →Page37
6
Water supply display Display for water supply
7
button If you press for approx. 3 seconds,
you can open the basic settings.
8
Start button "Starting the programme" →Page34
9
Programme buttons and additional
functions
"Programmes" →Page17
"Additional functions" →Page19
10
Remote Start →"Remote Start ", Page38
11
Timer programming "Setting timer programming" →Page34
12
Display The display shows information about the remain-
ing running time or the basic settings. You can
change the basic settings via the display and the
setting buttons.
13
Door opener1Opening the appliance door
1Depending on the appliance specifications
Programmes en
17
Programmes
Programmes
Programmes
You can find an overview of the pro-
grammes that can be selected here.
Different programmes, which can be
found on the control panel of your
appliance, are available depending
on the appliance configuration.
The running time may vary depend-
ing on the programme selected. The
running time depends on the water
temperature, the quantity of table-
ware, the level of soiling and the ad-
ditional function selected. The run-
ning time will change if the rinse aid
system is switched off or rinse aid
needs to be added.
The consumption values can be
found in the quick reference guide.
The consumption values relate to
normal conditions and a water hard-
ness of 16-20°E. Different influen-
cing factors such as water temperat-
ure or pipe pressure may result in
deviations.
Programme Use Programme sequence Additional func-
tions
Intensive 70°
Tableware:
¡Washing pots and pans,
non-fragile tableware and
cutlery.
Level of soiling:
¡Removing stubborn
burned or dried-on food
remnants containing
starch and protein.
Intensive:
¡Pre-Rinse
¡Cleaning 70°C
¡Intermediate rinse
¡Final rinse 69°C
¡Drying
All
→"Additional
functions",
Page19
Auto 45-65°
Tableware:
¡Cleaning mixed table-
ware and cutlery.
Level of soiling:
¡Removing common
household food remnants
lightly dried-on.
Sensor-controlled:
¡Optimised by sensors de-
pending on the soiling of
the rinsing water.
All
→"Additional
functions",
Page19
Eco 50°
Tableware:
¡Cleaning mixed table-
ware and cutlery.
Level of soiling:
¡Removing common
household food remnants
lightly dried-on.
Most economical pro-
gramme:
¡Pre-Rinse
¡Cleaning 50°C
¡Intermediate rinse
¡Final rinse 61°C
¡Drying
All
→"Additional
functions",
Page19
en Programmes
18
Programme Use Programme sequence Additional func-
tions
Silence 50°
Tableware:
¡Cleaning mixed table-
ware and cutlery.
Level of soiling:
¡Removing common
household food remnants
lightly dried-on.
Reduced noise:
¡Pre-Rinse
¡Cleaning 50°C
¡Intermediate rinse
¡Final rinse 63°C
¡Drying
All
→"Additional
functions",
Page19
Express 65° - 1h
Tableware:
¡Cleaning mixed table-
ware and cutlery.
Level of soiling:
¡Removing common
household food remnants
lightly dried-on.
Time-optimised:
¡Cleaning 65°C
¡Intermediate rinse
¡Final rinse 69°C
¡Drying
Extra Dry
→"Additional
functions",
Page19
Machine Care
Only when using unloaded
appliance.
Machine Care 70°C None
Favourite
---
Note:The relatively long running time
in the Eco50° programme is due to
longer soaking and drying times. This
results in optimal consumption val-
ues.
Information for test institutes
Test institutes are provided with in-
formation for comparability tests, e.g.
according to EN60436.
These are the conditions for conduct-
ing the tests, however they are not
the results or consumption values.
E-mail enquiries to: dishwasher@test-
appliances.com
The product number (E-Nr.) and the
production number (FD) are required
here. They can be found on the rat-
ing plate on the appliance door.
Favourite
You can save a combination of a pro-
gramme and an additional function to
the button.
You can save the program via the
Home Connect app or on the appli-
ance.
The pre-rinse program is saved to
this button at the factory. Pre-rinse is
suitable for all types of tableware.
The tableware undergoes intermedi-
ate cleaning via cold rinsing.
When programmes have been down-
loaded and on delivery of the appli-
ance, the name of the programme
will be displayed in the app. The dis-
play alternately shows "APP" and the
remaining running time.
Additional functions en
19
Tip:You can use the Home Connect
app to download additional pro-
grammes and save them to the
button.1
Save Favourite on the appliance.
1. Press ⁠.
2. Press the right programme button.
→"Programmes", Page17
3. Press the button for the relevant
additional function.
→"Additional functions", Page19
4. Press for approx. 3seconds.
aThe selected programme and the
additional function will flash.
a flashes.
aThe programme and the additional
function are saved.
Tip:To reset the programme, either
use the Home Connect app or reset
your appliance back to the factory
settings.
→"Overview of basic settings",
Page36
Additional functions
Additional functions
Additional functions
You can find an overview of the addi-
tional functions that can be selected
here. Different additional functions,
which can be found on the control
panel of your appliance, are available
depending on the appliance configur-
ation.
Additional func-
tion
Use
SpeedPerfect+
¡The run time is
shortened by 15% to
75% depending on the
rinse programme.
¡The additional function
can be activated before
the start of the pro-
Additional func-
tion
Use
gramme and at any
time when the pro-
gramme is running.
¡Energy and water con-
sumption are increased.
Half Load
¡Switch on with small
loads.
¡It is recommended
adding less detergent
to the detergent dis-
penser than for a full
machine load.
¡The run time is
shortened.
¡Energy and water con-
sumption are reduced.
Extra Dry
¡For a better drying res-
ult the final rinse tem-
perature is increased
and the drying phase
extended.
¡Especially suitable for
drying plastic parts.
¡There is a slight in-
crease in energy con-
sumption and the run
time is extended.
Features
Features
Features
You can find an overview of the pos-
sible features of your appliance and
how to use them here.
These features depend on the model
of your appliance.
1Depending on the appliance specifications
en Features
20
Top basket
Arrange cups and glasses in the top
basket.
a
Knife shelf 1
You can adjust the height of the top
basket to make room for larger items
of tableware.
Adjusting top basket with side
levers
To wash large items of tableware in
the baskets, adjust the shelf position
of the top basket.
1. Pull out the top basket.
2. To prevent the basket from sud-
denly dropping down, hold the
side of the basket by the top edge.
3. Press in the levers on the right and
left on the outside of the basket.
The basket can then slip down
slightly.
4. Raise or lower the basket evenly to
the right level.
→"Basket heights", Page24
Check that the basket is level on
both sides.
5. Slide the basket back in.
1Depending on the appliance specifications
Features en
21
Bottom basket
Arrange pans and plates in the bot-
tom basket.
a
Cutlery basket 1
Large plates up to a diameter of
31cm can be arranged in the bottom
basket as shown.
Cutlery basket
Arrange cutlery in the cutlery basket,
always without sorting it and with the
sharp points downwards.
3rd basket
Use the 3rd basket to wash large
items of cutlery that are lightly soiled
as well as small items of tableware,
e.g. small cups, bowls or cooking
spoons.
Moving the side shelf in the 3rd
basket
You can move the side shelf in the
3rd basket to wash stemware in the
top basket.
1. Move the side shelf to the left.
1Depending on the appliance specifications
en Features
22
2. Arrange the stemware in the top
basket.
Etagere
Use the cutlery shelf and space un-
derneath for small cups and glasses
or for large items of cutlery, e.g.
cooking spoons or serving cutlery.
If you do not need the cutlery shelf,
you can fold it up.
Folding prongs
Use the folding prongs to position
tableware securely, e.g. plates.
You can fold the prongs down to po-
sition pans, bowls and glasses
better.1
Folding down prongs1
If you do not need the prongs, fold
them down.
1. Push the lever forwards and fold
down the prongs ⁠.
12
2. To use the prongs again, fold them
back up.
aThe prongs audibly click into posi-
tion.
1Depending on the appliance specifications
Features en
23
Knife shelf
Use the shelf for knives and long
items of cutlery.
Baking sheet spray head
Use the baking sheet spray head to
clean large items of tableware, e.g.
trays, grilles and plates.
Arrange max. 2baking sheets and
2grilles as shown to ensure that the
spray jet can reach all parts.
Note:Check that the appliance is al-
ways operated with the top basket or
the baking sheet spray head.
Inserting baking sheet spray head
Use the baking sheet spray head in-
stead of the top basket to clean large
trays, grilles and plates.
1. Remove top basket.
2. Insert the baking sheet spray head
in the holder and turn to the
right ⁠.
aThe baking sheet spray head
clicks into position.
Removing baking sheet spray head
If you no longer require the baking
sheet spray head, remove it from the
appliance.
1. Turn the baking sheet spray head
anticlockwise and remove from the
holder.
2. Insert the top basket in the appli-
ance.
Extra Clean Zone
Use the Extra Clean Zone in the top
basket to clean soiled tableware thor-
oughly, e.g. muesli bowls.
en Features
24
Selecting Extra Clean Zone
Note:Consumption will increase if
you operate your appliance with the
Extra Clean Zone switched on.
1. Pull out the top basket.
2. Set the slider to ON or OFF.
3. Push in the top basket.
Cleaning Extra Clean Zone
Limescale and soiling from the dish-
washing water can block the nozzles.
Note:Always operate the appliance
with the Extra Clean Zone fitted.
1. Pull out the top basket.
2. Pull the tab on the Extra Clean
Zone up and forwards ⁠.
3. Set the slider to ON.
4. Clean under running water.
5. Place the Extra Clean Zone in the
top basket and lock in place ⁠.
Check that the mounts are in the
correct position.
aThe Extra Clean Zone audibly
clicks into position ⁠.
6. Push in the top basket.
Basket heights
Set the baskets at the right height.
Level Top basket Bottom basket
1 max. ø 18.5 cm 27.5 cm
2 max. ø 21 cm 25 cm
Before using for the first time en
25
Before using for the first time
Before using for the
first time
Before using for the first time
Configure the settings for initial start-
up.
Performing the initial config-
uration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip:Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
HomeConnect app.
→"HomeConnect quick start",
Page38
Requirement:"The appliance has
been installed and connected."
→Page11
1. "Add special salt." →Page26
2. "Add rinse aid." →Page28
3. "Switch on the appliance."
→Page33
4. "Setting the water softening sys-
tem." →Page26
5. "Set the amount of rinse aid to be
dispensed." →Page28
6. "Add detergent" →Page29.
7. Start the Programme with the
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip:You can change these settings
and other "Basic settings"
→Page36 at any time.
Water softening system
Water softening system
Water softening system
Hard water leaves limescale on the
tableware as well as the washing
tank and parts of the appliance may
become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hardness °E Hardness range mmol/l Setting value
0 - 8 Soft 0 - 1.1 H00
9 - 10 Soft 1.2 - 1.4 H01
11 - 12 Medium 1.5 - 1.8 H02
13 - 15 Medium 1.9 - 2.1 H03
16 - 20 Medium 2.2 - 2.9 H04
21 - 26 Hard 3.0 - 3.7 H05
27 - 38 Hard 3.8 - 5.4 H06
en Water softening system
26
Water hardness °E Hardness range mmol/l Setting value
39 - 62 Hard 5.5 - 8.9 H07
Note:Set the water hardness determ-
ined on your appliance.
→"Setting the water softening sys-
tem", Page26
With a water hardness of 0 - 8°E
you can dispense with special salt for
dishwashers and switch off the water
softening system.
→"Switching off the water softening
system", Page27
Setting the water softening
system
Set the water hardness on your appli-
ance.
1. Determine the water hardness and
the appropriate setting value.
→"Overview of water hardness set-
tings", Page25
2. Press ⁠.
3. To open the basic settings, press
for 3 seconds.
aThe display shows Hxx.
aThe display shows ⁠.
4. Press repeatedly until the
right water hardness has been set.
The value H04 is set at the factory.
5. To save the settings, press
for 3 seconds.
Special salt
You can use special salt to soften
water.
Adding special salt
If the special salt refill indicator lights
up, add special salt to the dispenser
for special salt just before the pro-
gramme starts. The amount of spe-
cial salt required depends on the wa-
ter hardness: the higher the water
hardness, the greater the amount of
special salt required.
ATTENTION!
¡Detergent may damage the water
softening system.
▶Only fill the dispenser of the wa-
ter softening system with special
dishwasher salt.
¡Special salt for dishwashers can
damage the tub due to corrosion.
▶To make sure that any special
salt that escapes is washed out
of the tub, add the special salt
to the dispenser for special salt
immediately before the pro-
gramme starts.
1. Unscrew the lid of the dispenser
for special salt and remove.
2. On initial start-up: Fill the dispenser
right up with water.
Water softening system en
27
3. Note:Only use special salt for
dishwashers.
Do not use salt tablets.
Do not use table salt.
Add the special salt to the dis-
penser.
a
Funnel 1
Fill the dispenser right up with spe-
cial salt. The water in the dis-
penser is displaced and forced
out.
4. Place the lid back on the dis-
penser and turn to close.
Switching off the water
softening system
If you find the special salt refill indic-
ator irritating, e.g. when using com-
bined detergents with salt replace-
ment substances, you can switch the
salt refill indicator off.
Note
To avoid damage to the appliance, only
switch off the water softening system in
the following cases:
¡The water hardness is max. 26 °E
and you are using combined deter-
gents with salt replacement sub-
stances. According to manufactur-
ers, combined detergents with salt
replacement substances can gen-
erally only be used up to a water
hardness of 26 °E without adding
special salt.
¡The water hardness is 0 - 8°E.
You do not need to use special
salt.
1. Press ⁠.
2. To open the basic settings, press
for 3 seconds.
aThe display shows Hxx.
aThe display shows ⁠.
3. Press repeatedly until the dis-
play shows H00.
4. To save the settings, press
for 3 seconds.
aThe water softening system is
switched off and the salt refill indic-
ator is deactivated.
Regeneration of the water
softening system
In order to obtain fault-free function of
the water softening system, the appli-
ance performs regeneration of the
water softening system at regular in-
tervals.
Regeneration of the water softening
system takes place before the end of
the main rinse cycle in all pro-
grammes. It will increase the run time
and consumption values, e.g. water
and electricity.
Overview of consumption values
with regeneration the water
softening system
Here you can find an overview of the
maximum additional run time and
consumption values during regenera-
tion of the water softening system.
Regeneration of the water softening
system after x rinse cycles
6
Additional run time in minutes 7
1Depending on the appliance specifications
en Rinse aid system
28
Additional water consumption in
litres
5
Additional power consumption in
kWh
0.05
The consumption values specified
are laboratory measurements determ-
ined in accordance with the currently
applicable standard and using the
Eco 50° programme and the factory
value of the water hardness is set to
16 - 20°E.
Rinse aid system
Rinse aid system
Rinse aid system
You can use the rinse aid system
and rinse aid to get tableware and
glasses rinsed perfectly without
marks.
Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Adding rinse aid
If the rinse aid refill indicator lights
up, top up with rinse aid. Only use
rinse aid for domestic dishwashers.
1. Press the catch on the lid of the
dispenser for rinse aid and lift
⁠.
1
2
2. Add rinse aid up to the max mark.
max
3. If rinse aid spills out, remove it
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the wash
cycle.
4. Close the lid of the dispenser for
rinse aid.
aThe lid clicks into position.
Setting the amount of rinse
aid
If there are streaks or water marks on
tableware, change the amount of
rinse aid.
1. Press ⁠.
2. To open the basic settings, press
for 3 seconds.
aThe display shows Hxx.
aThe display shows ⁠.
3. Press repeatedly until
the display shows the value set at
the factory r05.
4. Press repeatedly until the
right amount of rinse aid has been
set.
– A low setting adds less rinse aid
during the wash cycle and re-
duces streaking on tableware.
– A higher setting adds more
rinse aid during the wash cycle,
reduces water marks and im-
proves the drying result.
Detergent en
29
5. To save the settings, press
for 3 seconds.
Switching the rinse aid sys-
tem off
If you find the rinse aid refill indicator
irritating, e.g. when using combined
detergents with a rinse aid compon-
ent, you can switch the rinse aid sys-
tem off.
Tip:The function of rinse aid is lim-
ited with combined detergents. You
will generally get better results using
rinse aid.
1. Press ⁠.
2. To open the basic settings, press
for 3 seconds.
aThe display shows Hxx.
aThe display shows ⁠.
3. Press repeatedly until
the display shows the value set at
the factory r05.
4. Press repeatedly until the dis-
play shows r00.
5. To save the settings, press
for 3 seconds.
aThe rinse aid system is switched
off and the rinse aid refill indicator
is deactivated.
Detergent
Detergent
Detergent
Find out which detergents are suit-
able for your appliance.
Suitable detergents
Only use detergents that are suitable
for dishwashers. Both separate and
combined detergents are suitable.
For optimum washing and drying res-
ults, use separate detergent, adding
"Special salt" →Page26 and "Rinse
aid" →Page28 separately.
Modern, powerful detergents mainly
use a low-alkaline formulation with
enzymes. Enzymes break down
starch and remove protein. Oxygen-
based bleaching agents are generally
used to remove coloured marks, e.g.
tea or ketchup.
Note:Follow the manufacturer's in-
structions for each detergent.
Detergent Description
Tabs Tabs are suitable for all
cleaning functions and do
not need to be measured
out.
With shorter "Pro-
grammes" →Page17 tabs
sometimes do not dissolve
entirely and leave residues
of detergent. This may im-
pair the cleaning effect.
Powder deter-
gent
Powder detergent is re-
commended for shorter
"Programmes" →Page17.
The dosage can be adjus-
ted to the level of soiling.
Liquid detergent Liquid detergent works
faster and is recommen-
ded for shorter "Pro-
grammes" →Page17
without PreRinse.
Sometimes liquid deter-
gent may leak out despite
the detergent dispenser
being closed. This is not a
fault and is non-critical if
you remember the follow-
ing:
¡Only choose a pro-
gramme without PreR-
inse.
¡Do not select timer pro-
gramming for starting
the programme.
The dosage can be adjus-
ted to the level of soiling.
en Detergent
30
Tip:Suitable detergents are available
online via our website or from "Cus-
tomer Service" →Page57.
Separate detergents
Separate detergents are products
that do not contain components other
than detergent, e.g. powder deter-
gent or liquid detergent.
With powder and liquid detergent the
dosage can be individually adjusted
to the level of soiling of the table-
ware.
For better washing and drying results
and to avoid damage to the appli-
ance, please additionally use "Spe-
cial salt" →Page26 and "Rinse aid"
→Page28.
Combined detergent
Besides conventional separate deter-
gents, a number of products are
available with additional functions.
These products contain not only de-
tergent but also rinse aid and salt re-
placement substances (3in1) and,
depending on the combination (4in1,
5in1,...), additional components such
as glass protection or stainless steel
cleaner.
According to manufacturers, com-
bined detergents generally only func-
tion up to a water hardness of 26
°E. With a water hardness above 26
°E you will need to add special salt
and rinse aid. For the best washing
and drying results we recommend
using special salt and rinse aid from
a water hardness of 17°E. If you are
using combined detergent, the wash-
ing programme is adjusted automat-
ically to ensure the best possible
washing and drying result.
Unsuitable detergents
Do not use detergent which could
cause damage to the appliance or
present a risk to health.
Detergent Description
Hand washing-up
liquid
Hand washing-up liquid
can cause increased froth-
ing and damage the appli-
ance.
Detergent con-
taining chlorine
Chlorine residue on table-
ware may present a risk to
health.
Information on detergents
Follow the instructions on detergents
in everyday use.
¡Detergents marked as "organic" or
"ecological" (environmentally
friendly) generally contain lower
levels of active agents or com-
pletely dispense with certain sub-
stances. The cleaning effect may
be restricted here.
¡Set the rinse aid and the water
softening system to the separate
detergent or combined detergent
in use.
¡According to manufacturers, com-
bined detergents with salt replace-
ment substances can only be used
up to a certain water hardness,
usually 26 °E, without adding spe-
cial salt. For the best washing and
drying results we recommend us-
ing special salt from a water hard-
ness of 17°E.
¡To prevent sticking, only touch de-
tergents in a water-soluble pouch
with dry hands and only ever place
them in a dry detergent dispenser.
¡Even if the rinse aid and special
salt refill indicators light up, wash-
ing programmes will run properly
with combined detergents.
Tableware en
31
¡The function of rinse aid is limited
with combined detergents. You will
generally get better results using
rinse aid.
¡Use tablets with a special drying
performance.
Adding detergent
1. To open the detergent dispenser,
press the locking latch.
2. Add the detergent to the dry deter-
gent dispenser.
15 ml
25 ml
50 ml
If you are using tablets, one is
enough. Insert the tablets in a hori-
zontal position.
If you are using powder or liquid
detergent, follow the manufac-
turer's instructions and quantities
for dosage in the detergent dis-
penser.
20ml–25ml detergent is suffi-
cient for normal soiling. If table-
ware is only lightly soiled, slightly
less than the amount of detergent
specified is usually sufficient.
3. Close the lid of the detergent dis-
penser.
aThe lid clicks into position.
aThe detergent dispenser will open
automatically at the optimum time
during the programme. Powder or
liquid detergent will spread around
the washing tank and dissolve
there. Tablets will fall into the tablet
collecting tray and dissolve in the
right dosage. In order to ensure
that tablets can dissolve evenly, do
not place any other objects in the
tablet collecting tray.
Tip:If you use powder detergent and
select a program with pre-rinse, you
can also add a little detergent to the
interior door of the appliance.
Tableware
Tableware
Tableware
Only clean tableware that is suitable
for dishwashers.
Note:Decorated glassware and parts
made of aluminium or silver may
fade or discolour with dishwashing.
Delicate types of glass may turn
cloudy after a few washing cycles.
en Tableware
32
Damage to glass and table-
ware
Avoid damage to glass and table-
ware.
Cause Recommendation
The following table-
ware is not dish-
washer-safe:
¡Items of cutlery
and tableware
made from wood
¡Decorated glass-
ware, antique and
hand-crafted table-
ware
¡Plastic parts not
resistant to heat
¡Tableware made
from copper or tin
¡Tableware soiled
with ash, wax, lub-
ricating grease or
paint
¡Very small items of
tableware
Only put tableware in
the dishwasher if it is
marked as dish-
washer-safe by the
manufacturer.
Glass and tableware
was not dishwasher-
safe.
Only put glasses and
china in the dish-
washer if it is marked
as dishwasher-safe by
the manufacturer.
The chemical com-
position of the deter-
gent causes damage.
Use a detergent
marked as gentle on
tableware by the man-
ufacturer.
Highly caustic alkaline
or highly acidic clean-
ing agents, in particu-
lar commercial or in-
dustrial cleaning
agents, are not suit-
able for dishwashers
in conjunction with
aluminium.
If you are using highly
caustic alkaline or
highly acidic cleaning
agents, in particular
commercial or indus-
trial cleaning agents,
do not put aluminium
parts in the dish-
washer interior.
Cause Recommendation
The water temperat-
ure of the programme
is too high.
Select a programme
with lower temperat-
ures.
After the programme
has ended, take glass-
ware and cutlery out
of the appliance
without delay.
Arrange tableware
Arrange tableware correctly to optim-
ise the dishwashing result and pre-
vent damage to both the appliance
and tableware.
Tips
¡Using the appliance allows you to
save energy and water compared
to washing-up by hand.
¡See our website for examples of
how to load your appliance effi-
ciently, free of charge.
¡To save energy and water, load
the machine with the number of
place settings specified.
→"Technical specifications",
Page58
¡For better washing and drying res-
ults, position items with curves or
recesses at an angle so water can
run off.
1. Remove large remnants of food
from your tableware.
Basic operation en
33
To save resources, do not pre-
rinse tableware under running wa-
ter.
2. Observe the following when arran-
ging tableware:
– Put heavily soiled tableware in
the bottom basket, e.g. pans.
The more powerful the spray jet,
the better the dishwashing result
will be.
– To prevent damage to table-
ware, arrange it so it is stable
and cannot tip over.
– To prevent injury, arrange cut-
lery with the points and sharp
edges facing down.
– Position containers with the
openings facing down so no wa-
ter can collect in them.
– Do not block the spray arms -
make sure that they can turn
freely.
– Do not place small parts in the
tablet collecting tray and do not
block it with tableware so as not
to obstruct the lid of the deter-
gent dispenser.
Removing tableware
WARNING
Risk of injury!
Hot tableware can cause burns to the
skin. When hot, tableware is sensitive
to shock, may crack and can result in
injury.
▶When the programme has ended,
do not empty the appliance until
the tableware has cooled down for
a while.
1. To prevent water dripping on the
tableware, unload it starting at the
bottom and working up.
2. Check the washing tank and ac-
cessories for soiling and clean if
necessary.
→"Cleaning and servicing",
Page40
Basic operation
Basic operation
Basic operation
Switching on the appliance
▶Press ⁠.
The Eco 50° programme is set by
default.
The Eco 50° programme is an es-
pecially environmentally friendly
programme and ideal for normally
soiled tableware. It is the most effi-
cient programme for the combina-
tion of energy/water consumption
for this type of tableware and evid-
ences conformity with the EU Eco-
design Directive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
en Basic operation
34
Setting a programme
To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
▶Press the right programme button.
→"Programmes", Page17
aThe programme is set and the pro-
gramme button flashes.
aThe remaining running time of the
programme appears on the dis-
play.
Setting additional functions
You can set additional functions to
complete the washing programme
selected.
Note:The additional functions which
can be used depend on the pro-
gramme selected.
→"Programmes", Page17
▶Press the button for the relevant
additional function.
→"Additional functions", Page19
aThe additional function is set and
the additional function button
flashes.
Setting timer programming
You can delay the start of the pro-
gramme by up to 24hours.
1. Press ⁠.
a"h:01" appears in the display.
2. Use to set the required start
time for the programme.
3. Press ⁠.
aThis activates timer programming.
Tip:To deactivate timer program-
ming, press repeatedly until "h:00"
appears in the display.
Starting the programme
▶Press .
aThe programme has ended when
the display shows "0h:00m".
Notes
¡If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡You can only change a pro-
gramme when running if you can-
cel it.
→"Terminate programme",
Page35
¡The appliance switches off auto-
matically 1minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
Activating button lock
The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
▶Press for approx. 3seconds.
aThe button lock is activated and
will be automatically deactivated at
the end of the programme.
aWhen the appliance is operated,
flashes on the display.
aThe button lock remains activated
with a power failure.
Deactivate button lock
▶Press for approx. 3seconds.
Interrupting programme
Note:When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
Basic operation en
35
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1. Press ⁠.
aThe programme is saved and the
appliance switches off.
2. Press to resume the pro-
gramme.
Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
▶Press for approx.
4seconds.
aAll displays light up.
aAs soon as the displays are off,
the display shows "0h:01m" and
the residual water is pumped out.
aThe programme is cancelled and
ends after approx. 1minute.
Switching off appliance
1. Please note the information on
"Safe use" →Page10.
2. Press .
3. To prevent damage from dripping
water, turn the water tap off tight
(not applicable to appliances with
Aqua-Stop).
Tip:If you press during the wash
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
en Basic settings
36
Basic settings
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting Display text Selection Description
Water hardness H04 1H00 - H07 Set the water softening system to
your water hardness.
→"Setting the water softening sys-
tem", Page26
Level H00 switches the water soften-
ing system off.
Rinse aid dispensing r05 1r00 - r06 Set the amount of rinse aid to be dis-
pensed.
→"Setting the amount of rinse aid",
Page28
Switch the rinse aid system off with
level r00.
Intensive drying d00 1d00 - d01 The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note:Not suitable for delicate items
of tableware.
Switch Extra Dry on "d01" or off
"d00".
Hot water A00 1A00 - A01 Set cold water or hot water connec-
tion. Only set the appliance to hot
water if this can be prepared with
little energy and a suitable installa-
tion is available, e.g. solar heating
system with circulation line. The wa-
ter temperature should be at least
40°C and max. 60°C.
Switch hot water on "A01" or off
"A00".
1Factory setting (may vary according to model)
HomeConnect  en
37
Basic setting Display text Selection Description
Wi-Fi Cn0 Cn0 - Cn1 Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connec-
ted to the HomeConnect app.
→"HomeConnect ", Page37
Remote Start rc1 rc0 - rc2 Activate or deactivate
→"Remote Start ", Page38.
The following settings are possible:
¡With the setting "rc0", the func-
tion is permanently deactivated.
¡With the setting "rc1", the func-
tion can be selected via the
button.
→"Activating Remote Start ",
Page39
¡With the setting "rc2", the func-
tion is permanently activated.
This basic setting is not available un-
til after you have connected the
device with the HomeConnect app.
→"HomeConnect ", Page37
Factory setting rE Start with
YES
Confirm with
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1Factory setting (may vary according to model)
Changing basic settings
1. Press ⁠.
2. To open the basic settings, press
for 3 seconds.
aThe display shows Hxx.
aThe display shows ⁠.
3. Press repeatedly until
the display shows the required set-
ting.
4. Press repeatedly until the dis-
play shows the right value.
You can change several settings.
5. To save the settings, press
for 3 seconds.
HomeConnect
HomeConnect
HomeConnect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
HomeConnect app.
The HomeConnect services are not
available in every country. The avail-
ability of the HomeConnect function
depends on the availability of
HomeConnect services in your coun-
try. You can find information about
this at: www.home-connect.com.
en HomeConnect
38
To be able to use HomeConnect,
you must first set up the connection
to the WLAN home network (Wi-Fi1)
and to the HomeConnect app.
¡→"Connecting the appliance to
WLAN home network (Wi-Fi)",
Page38
The HomeConnect app guides you
through the entire login process. Fol-
low the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡Please consult the documents sup-
plied by HomeConnect.
¡Please also follow the instructions
in the HomeConnect app.
Note:Please note the safety precau-
tions in this instruction manual and
make sure that they are also ob-
served when operating the appliance
via the HomeConnect app.
→"Safety", Page4
HomeConnect quick start
Connect your appliance to a mobile
device quickly and easily.
Installing app
1. Install the HomeConnect app on
your mobile device.
2. Start the app and set up access
for HomeConnect.
The HomeConnect app guides
you through the entire login pro-
cess.
Connecting the appliance to WLAN
home network (Wi-Fi)
Requirements
¡HomeConnect app is installed on
your mobile device.
¡Wi-Fi on the router is activated.
¡The appliance receives signals
from the WLAN home network (Wi-
Fi) at its installation location.
1. With the help of the HomeConnect
App scan the QR code.
2. Follow the instructions in the
HomeConnect app.
HomeConnect settings
Adapt HomeConnect to your needs.
You can find the HomeConnect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
HomeConnect has been set up and
whether the appliance is connected
to your home network.
Remote Start
You can use the HomeConnect app
to start the appliance with your mo-
bile device.
Tip:If you select "rc2" in the "Basic
settings" →Page37 of this function,
the function is permanently activated
and you can start your appliance with
a mobile device at any time.
1Wi-Fi is a registered trademark of the Wi-Fi Alliance.
HomeConnect  en
39
Activating Remote Start
When you have selected "rc1" in the
basic settings of this function, activ-
ate the function on your appliance.
Requirements
¡The appliance is connected to your
WLAN home network.
¡The appliance is connected to the
HomeConnect app.
¡"rc1" is selected in the "Basic set-
tings " →Page37 of this function.
¡A programme is selected.
▶Press ⁠.
If you open the appliance door, the
function is automatically deactiv-
ated.
a button lights up.
Tip:To deactivate the function, press
⁠.
Remote Diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the HomeCon-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip:For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com
Software update
You can use this function to update
the software of your appliance, e.g.
for optimisation, troubleshooting or
safety-relevant updating.
The HomeConnect app informs you
about available software updates.
Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the HomeConnect
server (initial registration):
¡Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡The current software and hardware
version of your appliance.
¡Status of any previous reset to
factory settings.
This initial registration prepares the
HomeConnect functions for use and
is only required when you want to
use the HomeConnect functions for
the first time.
Note:Please note that the
HomeConnect functions can only be
utilised with the HomeConnect app.
Information on data protection can be
retrieved in the HomeConnect app.
en Cleaning and servicing
40
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning the tub
WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
▶Never use detergents containing
chlorine.
1. Remove any coarse soiling in the
interior with a damp cloth.
2. Add detergent to the detergent dis-
penser.
3. Select the programme with the
highest temperature.
→"Programmes", Page17
4. "Start the programme without
tableware." →Page34
Cleaning products
Only use suitable cleaning products
to clean your appliance.
→"Safe use", Page10
Tips on appliance care
Follow the tips on appliance care to
make sure your appliance functions
properly at all times.
Action Benefit
Wipe the door seals,
the front of the dish-
washer and the con-
trol panel regularly us-
ing a damp cloth and
washing-up liquid.
This ensures the parts
of the appliance will
remain clean and hy-
gienic.
If the appliance is not
going to be used for a
while, leave the door
slightly ajar.
This will prevent un-
pleasant odours.
Machine Care
Deposits, e.g. from remnants of food
and limescale, can cause your appli-
ance to malfunction. To avoid such
faults and reduce odours, we recom-
mend cleaning your appliance at reg-
ular intervals.
Machine Care combined with ma-
chine care products and machine
cleaners is the right programme for
the care of your appliance.
Tip:You can get our tested and ap-
proved Dishwasher Care and Ma-
chine Cleaner for Dishwashers online
at https://www.bosch-home.com/
store or from customer service.
Machine Care is a programme which
removes various deposits in one
washing cycle. Cleaning takes place
in two phases:
Phase Removal of Detergent Placement
1 Grease and limescale Liquid machine care product
or machine descaler in
powder form.
Appliance interior, e.g. bottle
hung in the cutlery basket or
powder in the interior.
2 Food remnants and de-
posits
Machine cleaner Detergent dispenser
Cleaning and servicing en
41
To ensure optimum cleaning perform-
ance, the programme doses the de-
tergents independently of each an-
other during the relevant cleaning
phase. Correct placement of the de-
tergents is necessary here.
Run Machine Care without tableware
if the indicator for Machine Care
lights up on the control panel or if ad-
vised to do so by the display. The in-
dicator will go out after you have run
Machine Care. If your appliance does
not have a reminder function, we re-
commend performing Machine Care
every 2months.
Running Machine Care
Run the Machine Care programme if
the indicator for Machine Care lights
up on the control panel or if advised
to do so by the display.
Notes
¡Run the Machine Care programme
without any tableware in the dish-
washer.
¡Only use machine care products
and machine cleaners specially
designed for dishwashers.
¡Make sure that there are no alu-
minium parts, e.g. extractor hood
grease filters or aluminium pans, in
the interior of the appliance.
¡If you have not run Machine Care
after 3 washing cycles, the indic-
ator for Machine Care will go out
automatically.
¡For optimum cleaning perform-
ance, ensure the correct place-
ment of cleaners.
¡Follow the safety instructions given
on the packagings of the machine
care products and machine clean-
ers.
¡Activate the "Extra Clean Zone"
→Page24 function.
1. Remove any coarse soiling in the
interior with a damp cloth.
2. Clean the filters.
3. Place the machine care product in
the appliance interior.
Only use machine care products
specially designed for dishwash-
ers.
4. Pour the machine cleaner into the
detergent dispenser until it is filled
completely.
Do not place any additional ma-
chine cleaner in the appliance in-
terior.
5. Press ⁠.
6. Press ⁠.
aMachine Care is run.
aOnce the programme has ended,
the indicator for Machine Care
goes out.
Filter system
The filter system removes coarse
soiling from the dishwashing cycle.
1
2
3
1
Micro filter
2
Fine filter
3
Coarse filter
Cleaning filters
Soiling in the dishwashing water may
block the filters.
1. After each wash check the filters
for residue.
en Cleaning and servicing
42
2. Turn the coarse filter anticlockwise
and remove the filter system ⁠.
‒Check that no foreign objects
fall into the sump.
1
2
3. Pull down the micro filter to re-
move.
4. Press the locking catches to-
gether and lift the coarse filter out
⁠.
1
2
5. Clean the filter elements under run-
ning water.
Carefully clean the rim of dirt
between the coarse and the fine fil-
ter.
6. Re-assemble the filter system.
Make sure that the locking catches
on the coarse filter click into posi-
tion.
7. Insert the filter system into the ap-
pliance and turn the coarse filter
clockwise.
Make sure that the arrow markings
match up.
Cleaning spray arms
Limescale and soiling in the dish-
washing water may block the nozzles
and bearings on the spray arms.
Clean the spray arms regularly.
1. Unscrew the upper spray arm
and pull down to remove ⁠.
1
2
2. Pull up the lower spray arm to re-
move.
Cleaning and servicing en
43
3. Check the outlet nozzles on the
spray arms for blockages under
running water and remove any for-
eign bodies.
4. Insert the lower spray arm.
aThe spray arm clicks into position.
5. Insert the upper spray arm and
screw it firmly in place.
… 43 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch SMS4HDW52G bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch SMS4HDW52G in de taal/talen: Engels als bijlage per email.

De handleiding is 6.22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info