Fault, what to do? en
35
Rust spots on the cutlery. Cutlery not adequately rust-
resistant. Knife blades are
frequently more severely
affected.
Use corrosion-resistant cutlery.
Cutlery will also rust if rusting
parts are rinsed at the same time
(pan handles, damaged utensil
baskets, etc.).
Do not wash rusting parts.
Salt content in the rinsing water
too high, as salt dispenser lock
not fastened firmly or salt was
spilled while being refilled.
Fasten salt dispenser lock firmly or remove
spilled salt.
Appliance does not start. The mains fuse has tripped. Check mains fuse.
Power cord not inserted. Ensure that the power cord is plugged all
the way into the back of the appliance and
into the socket. Check that the socket
functions.
The appliance door has not been
shut properly.
Close the door.
Programme starts
automatically.
You did not wait until programme
ended.
Perform reset.
(See Terminating the programme).
Door does not open. Door is not set correctly. Set the door correctly with the aid of the
installation instructions.
Appliance is disconnected from
the mains.
Check mains plug and fuses.
Attach supplied emergency release to upper
right and left of the furniture panel and open
the door by gently pulling the emergency
release.
Door and door seal dirty. Clean door and door seal with a damp cloth
and a little washing-up liquid.
Automatic door opening system
not in home position.
After closing the door, wait one second until
it can be opened again.
Door does not close. Automatic door opening system
not in home position.
After opening the door, wait one second
until it can be closed again.
Fault Cause Remedial action
