23203
18
Verklein
Vergroot
Pagina terug
1/99
Pagina verder
English - 6
Routing with Parallel Guide
(Accessory see figures + )
Slide the parallel guide 30 with the guide rods 31
into the base plate 12 and tighten at the required
measure with the wing bolts 16.
Guide the machine with uniform feed and side-
ward pressure on the parallel guide 30 along the
edge of the workpiece.
Routing Circular Arc Profiles
(see figures + )
Reverse the parallel guide 30 (facing surfaces
point upwards) and insert the guide rods into the
base plate 12. Fasten centring pin 32 to parallel
guide (through hole) with wing bolt 33.
Puncture centring pin into marked centre of the
circular arc and guide router with consistent feed
across the workpiece surface.
Routing with the Curve Buffer
(see figures + )
Slide the parallel guide 30 with the guide rods 31
into the base plate 12. Fasten the curve buffer 34
with the guide roller mounted to the parallel
guide 30.
Guide the machine along the workpiece edge
with light sideward pressure.
Routing with the Router Compass
(Accessory see figure )
Use the router compass/guide rail adapter 35
(accessory) for circular routing jobs.
Mount the router compass as shown in the figure.
Screw pointed centring screw 40 in thread. Insert
the point of the centring screw in the centre of the
circular arc to be milled and ensure that it en-
gages in the workpiece surface.
Coarse-adjust the required radius by positioning
the router compass, then tighten the locking
screws 37 and 38.
After loosening the locking screw 37, the router
compass can be reset with the fine adjustment
knob 39 (1 scale mark = 0.1 mm/1 rotation =
2.0 mm).
Lead the router over the workpiece, holding the
router with the right handle 19 and the additional
router compass handle 36.
Routing with Guide Rail
(Accessory see figure )
Working with the guide rail 42 is possible only
with use of the guide-rail adapter 35 (accessory).
Straight routing cuts are to be carried out with
help of the guide rail 42 (accessory).
For this, always use the base spacer 41 (acces-
sory) to compensate the height difference.
Mount the guide-rail adapter 35 with the guide
rods 31.
Place the guide rail on the workpiece and mount
with a suitable clamping device (e. g. screw
clamp).
Place the router with guide-rail adapter 35 on the
guide rail.
Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and the ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
Do not
connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must
be disposed of safely.
G H
I K
L
M
N
Maintenance and Cleaning
O
strain relief
live = brown
neutral = blue
To be fitted
by qualified
professional only
1 609 929 F23 - Buch Seite 6 Montag, 19. April 2004 8:27 08
18 • 1 609 929 F23 • 04.04
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch POF1300ACE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch POF1300ACE in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bosch POF1300ACE

Bosch POF1300ACE Gebruiksaanwijzing - English, Français, Espanôl - 99 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info