97440
17
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
English | 17
Bosch Power Tools 1 609 929 N72 | (30.1.08)
Dust/Chip Extraction
f Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in con-
nection with wood-treatment additives (chro-
mate, wood preservative). Materials contain-
ing asbestos may only be worked by
specialists.
Provide for good ventilation of the working
place.
It is recommended to wear a P2 filter-class
respirator.
Observe the relevant regulations in your coun-
try for the materials to be worked.
Operation
Operating Modes
f Before any work on the machine itself, pull
the mains plug.
Orbital Action Settings
The four orbital action settings allow for optimal
adaptation of cutting speed, cutting capacity and
cutting pattern to the material being sawed.
The level of orbital action can be set with rotary
switch 7, even during operation.
Pivoting Footplate (see figure B)
Due to its movability, the adjustable footplate 2
adapts to the required angular position of the
surface.
Starting Operation
f Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V can
also be operated with 220 V.
Switching On and Off
To start the machine, press the On/Off switch 5
and keep it depressed.
To lock the pressed On/Off switch 5, press the
lock-on button 6.
To switch off the machine, release the On/Off
switch 5 or when it is locked with the lock-on but-
ton 6, briefly press the On/Off switch 5 and then
release it.
Controlling/Presetting the Stroke Rate
Increasing or reducing the pressure on the
On/Off switch 5 enables stepless stroke-rate
control of the switched-on machine.
Light pressure on the On/Off switch 5 results in
a low stroke rate. Increasing the pressure also in-
creases the stroke rate.
When the On/Off switch 5 is locked, it is not pos-
sible to reduce the stroke rate.
With the thumbwheel for stroke rate preselec-
tion 4, the stroke rate can be preset and changed
during operation.
The required stroke rate is dependent on the ma-
terial and the working conditions and can be de-
termined by a practical trial.
Orbital action switched off (level 0):
For working thin or hard material such
as sheet metal or steel.
For achieving clean cutting edges.
Orbital action level I:
For working non-ferrous metals, hard-
wood, plastics or materials of medium
density.
Orbital action level II:
For working with soft materials such
as light building materials, insulation
material, etc.
Orbital action level III:
For working with soft materials such
as soft wood or tree wood.
OBJ_BUCH-648-001.book Page 17 Wednesday, January 30, 2008 8:54 AM
17

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bosch-PFZ-700-PE

Zoeken resetten

  • Heb na n kortsluiting de boel opengetrokken zonder n foto te maken van de aansluitingen van de draden. Ben nu de weg kwijt en kan nergens n tekening of video vinden van die bedrading. Wie o wie Gesteld op 27-6-2024 om 16:58

    Reageer op deze vraag Misbruik melden
  • Koolborstels vervangen hoe gaat dat .waar komt dat koperen pinnetje Gesteld op 8-7-2020 om 17:47

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch PFZ 700 PE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch PFZ 700 PE in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info