en
37
Appliance self-test
Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Starting the appliance self-test
ã=Caution
■ To prevent the self-test from
terminating, keep the appliance door
closed while the self-test program is
running.
■ As water or ice may be dispensed
during the test, keep a glass in the
dispenser unit while the self-test is
running.
1. Switch off the appliance and wait
5minutes.
2. Switch the appliance on. If a warning
signal sounds, it will automatically
switch off as the self-test progresses.
3. Within the first 10 seconds after
switching on the appliance, hold down
the super button, Fig. /2, for 3 to 5
seconds until an acoustic signal
sounds. Then immediately close the
door.
The self-test programme starts. While
the self-test is running, a long acoustic
signal sounds once and the controls
on the dispenser unit flash.
When the self-test has ended and an
acoustic signal
■ sounds twice, your appliance is in
working order.
■ sounds five times and the super
button flashes for 10 seconds, there is
a fault. An error code is indicated on
the temperature display 4. Inform
customer service.
Ending the appliance self-test
When the programme has ended, the
appliance switches over to normal
operation.
Customer service
Your local customer service can be
found in the telephone directory or in the
customer-service index. Please provide
customer service with the appliance
product number (E-Nr.) and production
number (FD).
These specifications can be found on the
rating plate. Fig.
To prevent unnecessary call-outs, please
assist customer service by quoting the
product and production numbers. This
will save you additional costs.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
GB 0844 892 8979 Calls from a BT
landline will be
charged at up to
3 pence per
minute. A call set-
up fee of up to
6pence may
apply.
IE 01450 2655
US 800 944 2904 toll-free
