en
13
Automatic connection with the home
network (WLAN)
If a WLAN router with WPS function is
available, you can automatically connect
the refrigerator to the home network.
1. Press the super button and the lock/
alarm off button simultaneously to
open the HomeConnect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press the
lock/alarm off button again until the
lock is deactivated.
2. Press the °C button repeatedly until
the displays AC and oF are shown.
3. Press the + button.
The appliance is ready for automatic
connection.
The display shows an animation for
2 minutes.
Follow the steps below during this
period.
4. Activate the WPS function on the
home network router (e.g. using the
WPS/WLAN button; information on this
topic can be found in the router
documentation).
■ If the connection is successful, on
flashes in the refrigerator display.
You can now connect the
refrigerator with the app.
■ If the display shows oF, it was not
possible to establish a connection.
Check whether the refrigerator is
located within the range of the
home network (WLAN).
Repeat the process or establish the
connection manually.
Manual connection with the home
network (WLAN)
If the WLAN router present does not
have a WPS function, or if this is
unknown, you can manually connect the
refrigerator with the home network.
1. Press the super button and the lock/
alarm off button simultaneously to
open the HomeConnect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press the
lock/alarm off button again until the
lock is deactivated.
2. Press the °C button repeatedly until
the displays SA and oF are shown.
3. Press the + button.
The appliance is ready for manual
connection.
The display shows an animation for
5 minutes.
Follow the steps below during this
period.
4. The refrigerator has now set up its
own WLAN network with the network
name HomeConnect.
You can now access this network with
your mobile device.
5. Open the settings menu of the mobile
device and call up the WLAN settings.
6. Connect the mobile device with the
WLAN network HomeConnect.
Password: HomeConnect
It can take up to 60 seconds to
establish the connection.
7. After successful connection, open the
HomeConnect app on the mobile
device.
The app will search for the refrigerator.
