665302
37
Verklein
Vergroot
Pagina terug
1/137
Pagina verder
en
37
Connecting the appliance
After setting up the appliance, wait for at least 1 hour
before starting the appliance up. The oil contained in
the compressor may have been displaced into the
refrigeration system during transport.
Before starting the appliance up for the first time, clean
its interior (see section “Cleaning the appliance”).
It is imperative to connect the appliance to the water
supply before establishing the electrical connections.
Do not remove the transit locks from the shelves and
trays until the appliance has been installed.
Water connection
m Warning
Risk of electric shock and damage to property.
Disconnect the appliance from the electricity mains
before carrying out any work on the water connection.
The water connection must only be installed by a
qualified plumber and in accordance with local
legislation and regulations governing water quality.
Connect the appliance to a domestic water supply with
the following specifications:
Minimum pressure: 1.0 bar
Maximum pressure: 8.0 bar
Contact a plumbing professional if you are uncertain
how to check the current water pressure.
m Caution
If the water pressure is more than 5.5 bar, a pressure-
reducing valve must be fitted; otherwise there is a risk
of water damage. If the water pressure is below
1.0 bar, the ice-maker will not function.
The water tap to which the connecting hose supplied is
connected should be easily accessible.
The appliance may only be connected to a cold water
pipe.
The taste and smell of the water can be improved by
installing the filter cartridge supplied. If doing so, take
note of the different connection specifications (see
section headed Water filter).
Note
After the appliance has been switched on, water can
drip from the water dispenser. After approx. 24 hours,
when the appliance has reached its operating
temperature, the dripping stops.
Connecting
m Caution
Risk of leaks and water damage.
Observe the following points:
Do not bend the connecting hose.
Cut off the connecting hose evenly.
Do not cut off the connection hose with pliers.
Put the connection hose all the way onto the screw
socket and the return stop valve.
Tighten the screw socket by hand. Do not use pliers.
Check the flow direction of the return stop valve.
Arrows on the return stop valve indicate the flow
direction.
1. Insert the connecting hose all the way into the return
stop valve.
2. Close the sleeve at the return stop valve and fasten
with a screw.
3. Insert the sieve into the reducing piece.
Note
Clean the sieve every year. If there are many particles
in the water, clean the sieve more frequently.
approx.
65 cm
approx.
33 cm
37

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bosch-KAD90VB20

Zoeken resetten

  • IJBLOKJES WORDT NIET MEER GEMAAKT. GRAAG ADVIES
    Gesteld op 26-7-2020 om 13:33

    Reageer op deze vraag Misbruik melden
  • Hoe krijgen we water? De koelkast is aangesloten op het water. Ik selecteer het waterdruppelteken, hou het glas tegen de pushendel, hoor een klik maar er komt vervolgens geen water. En na een dag acclimatiseren mag je wel verwachten dat er iets meer dan 4 tot 5 ijsblokjes in de bak zitten. Gesteld op 10-5-2020 om 08:07

    Reageer op deze vraag Misbruik melden
  • Hoe kan ik het slotje van de ijsblokjes eraf krijgen Gesteld op 24-11-2019 om 19:12

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch KAD90VB20 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch KAD90VB20 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 2,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info