7
7. Set the third microwave power setting and cooking time.
8. Press the
n button.
The operation starts. The total cooking time and the
ª symbol
for the first operation in the series appear in the display.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
0 button.
Changing the setting
Changes can only be made before operation begins. Press the
2 button repeatedly until the number for the series of
operations appears. Change the setting.
Opening the appliance door during operation
Operation is suspended. After closing the door, press the
n
button briefly. Operation will then continue.
Pausing operation
Press the
n button briefly. The oven is paused. Press the
n button again to continue operation.
Cancelling operation
Press the
n button and switch off the appliance using the %
button.
Notes
■ When you switch on the appliance using the % button, the
highest microwave power setting always appears in the
display as a suggestion.
■ If you open the appliance door during cooking, the fan may
continue to run.
Memory
The memory allows you to store the setting for your favourite
meal and call it up at any time.
Two memory locations are available: "
g" and "h".
The memory is useful if you prepare one meal particularly
frequently.
Saving settings in the memory
1. Press the % button.
Your appliance is ready for use.
2. Press the button for the microwave power setting you require.
The power and a suggested cooking time appear in the
display.
3. Set the cooking time using the rotary selector.
4. Press and hold the
g or h button for approximately
4 seconds until a signal sounds.
The setting is saved and can be started at any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Starting the memory function
You can start cooking at any time using the settings saved for
your meal.
1. Press the
% button.
Your appliance is ready for use.
2. Press the
g or h button.
The stored settings are displayed.
3. Press the
n button.
The memory function starts. The
r cooking time counts down
in the display.
Note: Once operation has started, you can no longer change
the memory location.
Note: The programmes which have been set remain stored
even if there is a power cut.
The cooking time has elapsed.
An audible signal sounds. The memory function has finished.
Use the
% button to switch off the appliance or make new
settings. You can stop the audible signal by pressing the
0
button.
Pausing
Briefly press the
n button or open the appliance door.
Operation is suspended.
After closing the door, press the
n button. Operation will then
continue.
Changing the basic settings
Your appliance has various basic settings which you can
change at any time.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Basic setting Options Explanation
™‚
Clock display
‚ = on
Clock display
ƒ = off
Displays the clock
™ƒ
Signal duration
ƒ= medium = 2 minutes
‚ = short = 10 seconds
„ = long = 5 minutes
Audible signal after the cooking time has
elapsed
™„
Button tone
‚ = on
Button tone
ƒ = off
Confirmation tone when a button is pressed
