13
3. Press the 2 button again in order to select the second
operation in the series.
4. Select and set the desired operating mode.
5. Press the
2 button again in order to select the third
operation in the series.
6. Select and set the desired operating mode.
7. Press the
n button.
Appliance operation begins.
Note: The first operation in the series is shown in the display.
The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
0 button.
Changing the setting
Note: Changes can only be made before operation begins.
1. Press the 2 button until operation 1, 2 or 3 in the series
appears in the displays
2. Set the desired operation in the series with the rotary
selector.
3. Press the
n button.
Appliance operation begins.
Cancelling operation
Press and hold the
n button until the intervention display
appears. You can now change the settings.
Time-setting options
You can call up the time-setting options menu by pressing
the
0 button. The following functions are available:
If the oven is switched off:
■ Setting the timer
■ Setting the clock
If the oven is switched on:
■ Setting the timer
■ Setting the cooking time
■ Setting a later end time
Setting the cooking time
If you set the cooking time for your meal, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Note: You can only set hours and minutes.
Example in diagram: Top/bottom heating, 180 °C, 45 minutes
1. Press the
0 button.
The time-setting options menu appears.
2. Turn the rotary selector to set the cooking time.
3. Press the
0 button.
The time-setting options menu closes.
4. If operation has not yet been started,
press the
n button.
You can see the cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the
0 button.
Cancelling the cooking time
Press the
0 button to open the menu. Set the cooking time
to 00:00:00 using the rotary selector. Press the
0 button to
close the menu.
Changing the cooking time
Press the
0 button to open the menu. Change the cooking
time using the rotary selector. Press the
0 button to close the
menu.
Setting a later end time
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Example: you put the food in the cooking compartment at 9:30
am. It takes 45 minutes to cook and will be ready at 10:15, but
you would like it to be ready at 12:45 instead. Change the end
time from 10:15 to 12:45. The oven goes into standby.
Cooking starts at 12:00 and finishes at 12:45.
In some programmes, it is not possible to move the end time.
Moving the end
Prerequisite: The selected operation has not already begun. A
cooking time must be set. The time-setting options menu
0 is
open.
1. Switch to "End" using the
X button.
The time at which operation is ended is displayed in the
second line.