Handleiding Bosch HBC84E663 (pagina 9 van 76) (Portugees, Spaans)

575765

Verklein

Vergroot

Pagina terug

1/76

Pagina verder

Opening the oven door during cooking

Operation is suspended. After closing the door, press the

button briefly. The programme will then continue.

Pausing operation

Press the

n button briefly. The oven is paused. Press the

n button again to continue operation.

Changing the cooking time

This can be done at any time. Use the

@ or A button to change

the cooking time.

Changing the microwave power setting

Press the button for the new microwave power setting. Use

the

@ or A button to set the cooking time and restart the

microwave.

Cancelling operation

Press and hold the

n button for approximately 4 seconds or

turn the function selector and temperature selector back to the

off position.

1, 2, 3 series of operations

You can use the SeriesOperations function to set up to three

different microwave power settings and times and then start.

Ovenware

Always use microwave-safe, heat-resistant ovenware.

Setting the Series of operations function

Set a cooking time for each operation in the series.

1. Set the function selector to Ý.

2. Press the 2 button.

The

ª for the first operation in the series appears on the

display.

3. Set the first microwave power setting and cooking time.

4. Press the 2 button.

The

« for the second operation in the series appears.

5. Set the second microwave power setting and cooking time.

6. Press the 2 button.

The

¬ for the third operation in the series appears.

7. Set the third microwave power setting and cooking time.

8. Press the n button.

Operation starts. The total cooking time appears.

The cooking time has elapsed

A signal sounds. The series of operations is finished. You can

stop the audible signal by pressing the

0 button.

Changing the setting

Changes can only be made before operation begins. Press the

2 button repeatedly until the number for the series of

operations appears. Change the setting.

Opening the oven door during cooking

Operation is suspended. After closing the door, press the

button briefly. The programme will then continue.

Pausing operation

Press the

n button briefly. The oven is paused. Press the

n button again to continue operation.

Cancelling operation

Press and hold the

n button for approximately 4 seconds or

turn the function selector to the off position.

Checking the cooking time

Press the

0 button twice.

Note: You can also combine a type of heating with the Series of

operations function. Set the type of heating first.

Setting the time-setting options

Your oven has various time-setting options. You can use the 0

button to call up the menu and switch between the individual

functions. All the time symbols are lit when you can make

settings. The brackets [ ] show you which time-setting option

you have currently selected. A time-setting option which has

already been set can be changed directly with the

@ or A

button when the relevant time symbol is in brackets.

Timer

You can use the timer as a kitchen timer. It runs independently

of the oven. The timer has its own signal. In this way, you can

tell whether it is the timer or a cooking time which has elapsed.

1. Press the 0 button once.

The time symbols light up in the display and the brackets are

around

2. Use the @ or A button to set the timer duration.

Default value for

@button = 10 minutes

Default value for

Abutton = 5 minutes

After a few seconds, the time setting is adopted. The timer

starts. The [

U] symbol lights up in the display and the timer

duration counts down. The other time symbols go out.

The timer duration has elapsed

A signal sounds. 00:00 is shown in the display. Use the

button to switch off the timer.

Changing the timer duration

Use the

@ or A button to change the timer duration. After a few

seconds, the change is adopted.

Clearing the timer period

Use the

A button to reset the Timer duration to as far as 0:00.

The change will be adopted after a few seconds. The Timer is

switched off.

Checking time settings

If several time-setting options have been set, the corresponding

symbols appear on the display. The timer counts down in the

foreground. The

U symbol is in brackets and the timer can be

seen counting down.

To check the Timer

U, Cooking time r or Clock 0, press

the

0 button repeatedly until the brackets are around the

relevant symbol. The value is shown for a few seconds on the

display.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Bosch HBC84E663 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Bosch HBC84E663

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info