14
Attaching the door
Reattach the oven door in the reverse sequence to removal.
1. When attaching the oven door, ensure that both hinges are
inserted straight into the opening (figure A).
2. The notch on the hinge must engage on both sides (figure B).
3. Fold back both locking levers (figure C). Close the oven
door.
ã=Risk of injury!
Risk of injury. If the oven door falls out accidentally or a hinge
snaps shut, do not reach into the hinge. Call the aftersales
service.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels from the
oven door.
Removal
1. Detach the oven door and lay on a cloth with the handle
facing down (figure A).
2. First undo the two bottom screws and then the two top
screws (figure B).
3. Remove the complete door base (figure C).
4. Remove the two clips from the top of the panel (figure D). To
do this, push the clip downwards slightly with your thumb and
pull the tab outwards with your index finger (figure E).
5. Lift the inner panel, push it slightly upwards and then pull it
down and out (figure F).
Clean the panels with glass cleaner and a soft cloth.
Do not use sharp or abrasive materials or a glass scraper. The
glass could be damaged.
Installation
During installation, make sure that the lettering "right above" is
at the top right.
1. Insert the inner panel diagonally upwards and attach at the
bottom (figure A).
2. Reinsert the clips on the top left and right (figure B). To do
this, hook the clips into the top of the bracket and press firmly
until they engage (figure C).
