Changing the basic settings
Your oven has various basic settings. These settings can be
customised to suit your requirements.
The oven must be switched off.
1. Press and hold the 0 button for approx. 4 seconds.
The current basic setting for signal duration is shown in the
display, e.g. c1 2 for selection 2.
2. Use the @ or A button to change the basic setting.
3. Confirm by pressing the 0 button.
The next basic setting appears in the display. You can scroll
through all levels with the
0 button and change the setting
with the @ or A button.
4. To finish, press and hold the 0 button for approx. 4 seconds.
All basic settings are applied.
You may change the basic settings at any time.
Automatic switch-off
If you do not change the settings on your appliance for several
hours, automatic switch-off is activated. The oven stops heating.
The point at which this occurs depends on the temperature or
grill setting that has been set.
Automatic switch-off is activated
A signal sounds. F8 appears in the display. The oven stops
heating.
Turn the function selector to the off position. The oven switches
off.
Overriding automatic switch-off
So that automatic switch-off is not activated when it is not
wanted, you can set a time period. The oven will heat until this
period has expired.
Self-cleaning
During self-cleaning, the oven heats up to approx. 500 . This
burns off residues from roasting, grilling or baking and you only
need to wipe the ashes from the cooking compartment.
You can choose from three cleaning levels.
The heavier and older the dirt, the higher the cleaning level
should be. It is sufficient to clean the cooking compartment
every two to three months. If required, you can clean the oven
more frequently than this. A cleaning cycle requires only
approx. 2.5 - 4.7 kilowatt hours.
Important notes
For your safety, the oven door locks automatically. The oven
door cannot be opened again until the cooking compartment
has cooled slightly and the padlock symbol for the locking
mechanism disappears.
The oven light in the cooking compartment does not come on
during Self-cleaning.
ã=Risk of burns!
■ The cooking compartment will become very hot during the
Self-cleaning cycle. Never open the appliance door or move
the locking latch by hand. Allow the appliance to cool
down.Keep children at a safe distance.
Risk of burns !
■ The appliance will become very hot on the outside during the
Self-cleaning cycle. Never touch the appliance door. Allow
the appliance to cool down.Keep children at a safe distance.
ã=Risk of fire!
The appliance will become very hot on the outside during the
Self-cleaning cycle. Never hang flammable objects, e.g. tea
towels, on the door handle. Do not place anything against the
front of the appliance.
Basic setting Selection 0 Selection 1 Selection 2 Selection 3
c0 Brightness of the display lighting - night medium* day
c1 Signal duration upon completion
of a cooking time or timer period
- approx. 10 seconds approx. 2 minutes* approx. 5 minutes
c2 Clock display only when in opera-
tion*
always* - -
c3 Waiting time until a setting is
applied
- approx. 2 seconds approx. 5 seconds* approx. 10 seconds
c5 Telescopic shelves retrofitted no* yes - -
c6 Reset all values to the factory set-
tings
no* yes - -
* Factory setting
Level Degree of cleaning Cooking time
1 gentle approx. 1 hour, 15 minutes
2 medium approx. 1 hour, 30 minutes
3 intensive approx. 2 hours
