786317
28
Verklein
Vergroot
Pagina terug
1/437
Pagina verder
28 | English
uAlways position the protective guard(9) such that the
two cams on the unlocking lever(1) engage in the
corresponding openings on the protective guard(9).
uAdjust the protective guard (9) such that sparking in
the direction of the operator is prevented.
uThe protective guard (9) must only be adjustable
while the unlocking lever (1) is actuated. Otherwise,
the power tool must not be used any more under any
circumstances and must be sent to the after-sales ser-
vice.
Note: The coding cams on the protective guard (9) ensure
that only a protective guard that is suitable for the power
tool can be fitted.
Extraction guard for sanding
For low-dust grinding of paints, lacquers and plastics in con-
junction with carbide grinding heads(13), you can use the
extraction guard(8). The extraction guard(8) is not suitable
for machining metal.
A suitable Bosch dust extractor can be connected to the ex-
traction guard(8). To do so, insert the vacuum hose with
dust extraction adapter into the provided receiving connec-
tion of the extraction guard.
Protective guard for cutting
uFor cutting, always use the protective guard for
cutting(10) or the protective guard for grinding (9)
together with the cover for cutting(11).
uProvide sufficient dust extraction when cutting stone.
The protective guard for cutting(10) is fitted in the same
way as the protective guard for grinding(9).
Metal cover for cutting
Fit the metal cover for cutting(11) on the protective guard
for grinding(9) (see figureA): Swivel the tool retainer back
(). Attach the cover(11) to the protective guard for
grinding(9) (). Press the tool retainer firmly into place on
the protective guard(9) ().
To remove the cover (see figureB), press the button on the
tool retainer () and swivel it back (). Remove the
cover(11) from the protective guard(9) ().
Plastic cover for cutting
Attach the plastic cover for cutting(11) to the protective
guard for grinding(9) (see figureC). The cover(11) audibly
and visually engages on the protective guard(9).
To remove the cover (see figureD), unlock the cover(11) on
the left- or right-hand side of the protective guard(9) ()
and remove the cover ().
Extraction guard for cutting with a guide block
The extraction guard for cutting with a cutting guide(32) is
fitted in the same way as the protective guard for grinding.
By securing the auxiliary handle(6)/(7) with the clip through
the extraction guard on the gearbox housing, the power tool
is firmly attached to the extraction guard. A suitable Bosch
dust extractor can be connected to the extraction guard with
a cutting guide(32). To do so, insert the vacuum hose with
dust extraction adapter into the provided receiving connec-
tion of the extraction guard.
Note: The friction generated by the dust in the vacuum hose
and accessory during extraction causes an electrostatic
charge that the user may experience as static discharge (de-
pending on environmental factors and their physiological
state). Bosch generally recommends using an anti-static va-
cuum hose (accessory) to vacuum up fine dust and dry ma-
terials.
Hand guard
uAlways fit the hand guard (24) when working with the
rubber sanding pad (25) or with the cup brush/conical
brush/diamond annular cutter.
Attach the hand guard (24) to the side handle (6).
Standard auxiliary handle/low-vibration auxiliary handle
Screw the auxiliary handle (6)/(7) on the right or left of the
machine head depending on the working method.
uDo not operate your power tool without the auxiliary
handle(6)/(7).
uDo not continue to use the power tool if the auxiliary
handle (6)/(7) is damaged. Do not make any altera-
tions to the auxiliary handle (6)/(7).
The low-vibration auxiliary
handle (7) reduces vibra-
tion, enabling the tool to be
used safely and more com-
fortably.
Fitting the Abrasive Tools
uPull the plug out of the socket before carrying out any
work on the power tool.
uDo not touch grinding and cutting discs until they have
cooled down. The discs can become very hot while work-
ing.
Clean the grinding spindle (23) and all the parts to be fitted.
Lock the grinding spindle with the spindle lock button (2)
before clamping and releasing the abrasive tools.
uDo not press the spindle lock button while the grind-
ing spindle is moving. The power tool may become dam-
aged if you do this.
Grinding/cutting disc
Pay attention to the dimensions of the abrasive tools. The
diameter of the hole must match that of the mounting flange.
Do not use an adapter or reducer.
When using diamond cutting discs, make sure that the direc-
tion of rotation arrow on the diamond cutting disc corres-
ponds to the direction of rotation of the machine (see direc-
tion of rotation arrow on the housing).
See the graphics page for fitting instructions.
Note: When assembling bonded grinding or cutting discs us-
ing the supplied mounting flange(12) and the clamping
nut(19) or quick-clamping nut(20), the use of intermediate
layers is not necessary.
To secure the grinding/cutting disc, place the mounting
flange with O-ring(12) on the grinding spindle(23) and
screw on the clamping nut(19). Ensure the alignment of the
clamping nut(19) depending on the grinding/cutting disc
1 609 92A 6A0 | (11.02.2022) Bosch Power Tools
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GWS 17-125 TS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GWS 17-125 TS in de taal/talen: Alle talen als bijlage per email.

De handleiding is 16.34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info