594785
13
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
Bosch Power Tools 1 609 92A 10X | (11.11.14)
English | 13
Deutschland
Robert Bosch GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
37589 Kalefeld – Willershausen
Unter www.bosch-pt.de können Sie online Ersatzteile be-
stellen oder Reparaturen anmelden.
Kundendienst: Tel.: (0711) 40040480
Fax: (0711) 40040481
E-Mail: Servicezentrum.Elektrowerkzeu-
ge@de.bosch.com
Anwendungsberatung: Tel.: (0711) 40040480
Fax: (0711) 40040482
E-Mail: Anwendungsberatung.pt@de.bosch.com
Österreich
Unter www.bosch-pt.at können Sie online Ersatzteile be-
stellen.
Tel.: (01) 797222010
Fax: (01) 797222011
E-Mail: service.elektrowerkzeuge@at.bosch.com
Schweiz
Unter www.bosch-pt.com/ch/de können Sie online Ersatz-
teile bestellen.
Tel.: (044) 8471511
Fax: (044) 8471551
E-Mail: Aftersales.Service@de.bosch.com
Luxemburg
Tel.: +32 2 588 0589
Fax: +32 2 588 0595
E-Mail: outillage.gereedschap@be.bosch.com
Entsorgung
Druckluftwerkzeug, Zubehör und Verpackung sollten einer
umweltgerechten Wiederverwertung zugeführt werden.
Entsorgen Sie Schmier- und Reinigungsstoffe um-
weltgerecht. Beachten Sie die gesetzlichen Vor-
schriften.
Wenn Ihr Druckluftwerkzeug nicht mehr gebrauchsfähig
ist, geben Sie es bitte beim Handel ab oder schicken es di-
rekt (bitte ausreichend frankiert) an:
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstr. 3
37589 Kalefeld
Änderungen vorbehalten.
English
Safety Notes
General Safety Rules for Pneumatic Tools
Before installing, operating, repair-
ing, maintaining and replacing ac-
cessories as well as prior to working near by the pneu-
matic tool, please read and observe all instructions.
Failure to follow the following safety warnings may result in
serious injury.
Save all safety warnings and instructions for future ref-
erence, and make them available to the operator.
Work area safety
Pay attention to surfaces that may have become slip-
pery from using the machine, and to tripping haz-
ards from the pneumatic or hydraulic hose. Slipping,
tripping and falling are main reasons for workplace inju-
ries.
Do not operate the pneumatic tool in explosive at-
mospheres, such as in the presence of flammable liq-
uids, gases or dusts. While working the workpiece,
sparks can be created which may ignite the dust or
fumes.
Keep children and bystanders away from your work-
place while operating the pneumatic tool. Distrac-
tions from other persons can cause you to lose control
over the pneumatic tool.
Pneumatic tool safety
Never direct the airflow against yourself or other
persons close by, and conduct cold air away from
your hands. Compressed air can lead to serious inju-
ries.
Check the connections and the air supply lines. All
maintenance units, couplers, and hoses should con-
form to the product specifications in terms of pressure
and air volume. Too low pressure impairs the function of
the pneumatic tool; too high pressure can result in ma-
terial damage and personal injury.
Protect the hoses from kinks, restrictions, solvents,
and sharp edges. Keep the hoses away from heat,
oil, and rotating parts. Immediately replace a dam-
aged hose. A defective air supply line may result in a
wild compressed-air hose and can cause personal inju-
ry. Raised dust or chips may cause serious eye injury.
Make sure that hose clamps are always tightened
firmly. Loose or damaged hose clamps may result in un-
controlled air escape.
Personal safety
Stay alert, watch what you are doing, and use com-
mon sense when operating a pneumatic tool. Do not
use a pneumatic tool while tired or under the influ-
ence of drugs, alcohol, or medication. A moment of
inattention while operating a pneumatic tool may result
in personal injury.
Use personal protective equipment. Always wear
eye protection. Wearing personal protective equip-
ment such as a respirator, non-skid safety shoes,
hard hat or hearing protection according to the in-
structions of your employer or as required by the provi-
sions for work and health protection, reduces the risk of
personal injury.
Prevent unintentional starting. Make sure that the
pneumatic tool is switched off before connecting it
to the air supply, picking it up or carrying it. When
your finger is on the On/Off switch while carrying the
pneumatic tool or when connecting the pneumatic tool
to the air supply while it is switched on, accidents can
occur.
Remove any adjustment tools before switching on
the pneumatic tool. A wrench or key left attached to a
rotating part of a pneumatic tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the pneumat-
ic tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not directly inhale the exhaust air. Avoid expos-
ing the eyes to exhaust air. The pneumatic tool’s ex-
haust air can contain water, oil, metal particles and de-
bris from the compressor. This can cause damage to
one’s health.
Pneumatic tool use and care
Use the clamping devices or a vice to secure and sup-
port the workpiece. Holding the workpiece by hand or
against your body will not allow for safe operation of the
pneumatic tool.
Do not overload the pneumatic tool. Use the pneu-
matic tool intended for your work. The correct pneu-
matic tool will do the job better and safer at the rate for
which it is designed.
Do not use a pneumatic tool that has a defective
On/Off switch. A pneumatic tool that cannot be con-
trolled with the switch is dangerous and must be re-
paired.
Disconnect the air supply before making any adjust-
ments, changing accessories, or when not using for
extended periods. This safety measure prevents acci-
dental starting of the pneumatic tool.
Store idle pneumatic tools out of the reach of chil-
dren. Do not allow persons unfamiliar with the pneu-
matic tool or these instructions to operate the de-
vice. Pneumatic tools are dangerous in the hands of
untrained users.
Maintain the pneumatic tool with care. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
pneumatic tool’s operation. Have damaged parts re-
paired before using the pneumatic tool. Many acci-
dents are caused by poorly maintained pneumatic tools.
Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the pneumatic tool, accessories, application
tools, etc. according to these instructions. Take into
consideration the working conditions and the activi-
ties to be carried out. This reduces the development of
dust, vibrations and noise to the greatest extent.
The pneumatic tool should be set up, adjusted or
used exclusively by qualified and trained operators.
The pneumatic tool may not be modified in any way.
Modifications can reduce the effectivity of the safety
measures and increase the risks for the operator.
Service
Have your pneumatic tool repaired only through a
qualified repair person and only using original re-
placement parts. This will ensure that the safety of the
pneumatic tool is maintained.
Safety Warnings for Compressed-air
Nailers/Staplers
Wear safety goggles.
Always assume that the pneumatic tool is loaded
with fasteners. Careless handling of the pneumatic
tool can lead to unexpected shot actuation of fasteners
and cause injury.
When working, hold the pneumatic tool in such a
manner that your head and body cannot be injured in
case of sudden kickback due to a malfunction of the
energy supply or from hard objects/locations in the
workpiece.
Never point the pneumatic tool at yourself or at per-
sons close by. Unexpected actuation will expel a fas-
tener, which can lead to injury.
Do not actuate the pneumatic tool until firmly placed
against the workpiece. When the pneumatic tool is not
in contact with the workpiece, the fastener can bounce
away from the fastening point and overload the pneu-
matic tool.
Do not work on ladders or scaffolds
when the actuation system “Contact ac-
tuation” is set. In particular, do not move
from one fastening location to another,
close boxes or enclosures, or fasten
transport-securing fixtures on e.g., vehicles and wag-
gons, via scaffolds, stairs, ladders or ladder-like con-
structions, such as roof battens. With this actuation sys-
tem, a fastener will be discharged each time when
accidentally applying the pneumatic tool while the dis-
charge lock-off is pressed in. This can lead to injury.
Observe the conditions of the job site. It is possible
that fasteners can burst through thin workpieces or be
deflected when working in corners or against edges,
and harm persons.
Disconnect the air supply, when the fas-
tener is jammed in the pneumatic tool.
When the pneumatic tool is still connected
to the power supply, it can accidentally be
actuated when removing a jammed fasten-
er.
Use caution when removing a jammed or stuck fas-
tener. The system can be under tension and cause the
fastener to be shot or thrust out, while attempting to
clear the jam.
OBJ_BUCH-1038-004.book Page 13 Tuesday, November 11, 2014 2:36 PM
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GTK 40 Professional bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GTK 40 Professional in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 16,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info