786295
19
Verklein
Vergroot
Pagina terug
1/287
Pagina verder
English | 19
Battery model ProCORE18V...
LED Capacity
5 × continuous green light 80–100%
4 × continuous green light 60–80%
3 × continuous green light 40–60%
2 × continuous green light 20–40%
1 × continuous green light 5–20%
1 × flashing green light 0–5%
Recommendations for Optimal Handling of the
Battery
Protect the battery against moisture and water.
Only store the battery within a temperature range of −20 to
50°C. Do not leave the battery in your car in the summer, for
example.
Occasionally clean the ventilation slots on the battery using a
soft brush that is clean and dry.
A significantly reduced operating time after charging indic-
ates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.
Operation
Suitable blind rivet/nosepiece combinations
The use of a combination not listed in the table below may
lead to poor fastening or a malfunction of the power tool.
Blind rivet Nosepiece
Size Rivet mandrel Labelling Hole diameter
Dia.3.0mm (1/8")
Dia.3.2mm (1/8") Dia.2.00−2.15mm
Dia.1.85−2.15mm 3.0/3.2 Dia.2.3−2.4mm
Dia.4.0mm (5/32") Dia.2.35−2.80mm 4.0 Dia.2.7−2.8mm
Dia.4.8mm (3/16")
Dia.5.0mm (3/16") Dia.2.77−3.50mm
Dia.2.95−3.50mm 4.8/5.0 Dia.3.3−3.4mm
Dia.6.0mm (1/4")
Dia.6.4mm (1/4") Dia.3.40−3.50mm
Dia.3.71−4.00mm 6.4 Dia.4.6−4.7mm
Setting a blind rivet (see figuresA1–A3)
Prepare the workpieces to be connected. If no holes are
yet available, pre-drill the workpieces.
Select a suitable nosepiece(1). Screw the nosepiece
onto the cover sleeve(2) and tighten it with the
wrench(9).
Use the AUTO(18) button to select the required working
mode(see "Selecting the working mode", page20).
Insert the rivet mandrel of the blind rivet(20) into the
nosepiece(1).
Hold the power tool tightly and push the blind rivet into
the pilot hole.
Depending on the working mode, press the on/off
switch(12) and wait until the rivet mandrel has broken
off.
Tilt the power tool backwards so that the rivet mandrel
can fall into the mandrel container(5).
Note:After setting the blind rivet, ensure that the broken-off
rivet mandrel has fallen into the mandrel container before
setting the next blind rivet.
Changing the Nosepiece (see figureB)
The nosepiece magazine(4) contains nosepieces of three
different sizes, enabling the user to exchange nosepieces
quickly.
Use the wrench(9) to unscrew the nosepiece(1) from
the cover sleeve(2).
Screw the new nosepiece on and tighten it with the
wrench(9).
Empty the mandrel container (seefigureC)
Always empty the mandrel container(5) for broken-off rivet
mandrels before it is completely full in order to prevent
blockages.
Unscrew the mandrel container(5) by turning it anti-
clockwise.
Empty the mandrel container(5) into a suitable recycling
or waste bin.
Screw the mandrel container (5) back onto the power
tool by turning it clockwise.
Bosch Power Tools 1 609 92A 7R1 | (22.06.2022)
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GRG 18V-16 C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GRG 18V-16 C in de taal/talen: Alle talen als bijlage per email.

De handleiding is 5.83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info