Handleiding Bosch GOP 12V-28 (pagina 17 van 337) (Alle talen)

786252

Verklein

Vergroot

Pagina terug

1/337

Pagina verder

English | 17

ing a "live" wire may make exposed metal parts of the

power tool "live" and could give the operator an electric

shock.

uUse clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the workpiece by hand or against your body leaves it un-

stable and may lead to loss of control.

uOnly use the power tool for dry sanding. Water entering

a power tool will increase the risk of electric shock.

uWarning: Danger of fire! Avoid overheating the work-

piece and the sander. Always empty the dust collector

before taking a break from work. Sanding dust in the

dust bag, microfilter, paper bag (or in the filter bag or va-

cuum cleaner filter) can spontaneously combust under

certain conditions, for example if flying sparks are cre-

ated when sanding metals. This risk is increased if the

sanding dust is mixed with paint or polyurethane residue

or with other chemical substances and if the workpiece is

hot as a result of prolonged work.

uKeep hands away from the sawing area. Do not reach

under the workpiece. Contact with the saw blade can

lead to injuries.

uClean the air vents on your power tool regularly. The

motor’s fan will draw the dust inside the housing and ex-

cessive accumulation of powdered metal may cause elec-

trical hazards.

uUse suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

uHold the power tool firmly with both hands and make

sure you have a stable footing. The power tool can be

more securely guided with both hands.

uWhen changing the application tool, wear protective

gloves.Application tools can become hot when used for

prolonged periods of time.

uDo not scrape any dampened materials (e.g. wallpa-

per) or on damp surfaces. Water entering a power tool

increases the risk of electric shock.

uDo not treat the surface you will be working on with

any fluids that contain solvents. Poisonous vapours

may develop due to the materials heating up when being

scraped.

uTake particular care when handling scrapers and

blades. The application tools are very sharp. Danger of in-

jury.

uIn case of damage and improper use of the battery, va-

pours may be emitted. The battery can set alight or ex-

plode. Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The

vapours may irritate the respiratory system.

uDo not open the battery. There is a risk of short-circuit-

ing.

uThe battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

uOnly use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g. against

continuous intense sunlight, fire, dirt, water

and moisture. There is a risk of explosion and

short-circuiting.

Product description and

specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended use

The power tool is intended for sawing and cutting wood-

based materials, plastic, plasterboard, non-ferrous metals

and mounting elements (e.g. non-hardened nails, clamps). It

is also suitable for working on soft wall tiles and for dry sand-

ing and scraping of small areas. It is ideal for working close to

edges and flush with surfaces. The power tool must only be

operated using Bosch accessories.

Product features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1) On/off switch

(2) Rechargeable battery release button

(3) Rechargeable batterya)

(4) Ventilation slots

(5) Orbital stroke rate preselection thumbwheel

(6) Battery charge indicator

(7) Tool holder

(8) Clamping lever for depth stopa)

(9) Depth stopa)

(10) Plunge cut saw bladea)

(11) Clamping bolt

(12) Hex key

(13) Handle (insulated gripping surface)

(14) Dust extraction systema)

(15) Sanding platea)

(16) Sanding sheeta)

(17) Clamping lever for dust extraction systema)

(18) Dust extraction outleta)

(19) Dust extraction adaptera)

Bosch Power Tools 1 609 92A 819 | (01.07.2022)

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Bosch GOP 12V-28 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info