786282
23
Verklein
Vergroot
Pagina terug
1/315
Pagina verder
English | 23
Maintenance Schedule
Clean the magazine(12). Remove plastic or wood shav-
ings that may accumulate in the magazine during work.
Clean the power tool at regular intervals using com-
pressed air.
Measure Explanation Action
Cleaning the magazine(12) and
magazine slider(13).
Prevents a nail from becoming jammed. Blow out the mechanism of the
magazine/magazine slider daily with
compressed air.
Ensure that the discharge lock-off(2)
functions properly.
Promotes your work safety and efficient
use of the power tool. Blow out the mechanism of the dis-
charge lock-off daily with compressed
air.
Rectifying Faults
Problem Cause Corrective measures
The power tool is not ready for opera-
tion. The battery is discharged or defective. Fully recharge the battery or replace
it.
The battery is not properly inserted. Make sure that the battery is firmly
engaged in the handle.
The battery temperature is too high or
too low. Wait until the battery has reached the
optimal operating temperature again.
The battery contacts are contaminated
or defective. Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
The magazine(12) is empty. Refill the magazine.(see "Loading the
magazine (seefiguresA1A4)",
page20)
The discharge lock-off(2) is bent. Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
The electronic system is defective. Contact an authorised Bosch after-
sales service centre.
The user interface(9) is defective. Contact an authorised Bosch after-
sales service centre.
The power tool is ready for operation,
but no nails are discharged. The following components may be faulty:
Trigger(5)
Driver blade
Motor or drive belt
Electronics
Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
Foreign objects have accumulated in the
shot mechanism. Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
Foreign objects have accumulated in the
outlet(15) or in the magazine(12). Clean the outlet(15) or the
magazine(12).
A nail is jammed in the shot duct. Clear the jam.(see "Clearing jams
(seefiguresE1E2)", page22)
The magazine slider(13) is defective. Clean the magazine slider(13) as re-
quired and make sure that the
magazine(12) is not contaminated.
The spring of the magazine slider is too
weak or defective. Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
Bosch Power Tools 1 609 92A 81N | (01.08.2022)
23

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bosch-GNH-18V-64

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GNH 18V-64 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GNH 18V-64 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 6.35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info