110210
21
Verklein
Vergroot
Pagina terug
1/264
Pagina verder
English | 211 609 929 K21 3.11.06
f The extraction adapter may not be mounted
when no external dust extraction is con-
nected. Otherwise the extraction channel can
become clogged.
f Do not connect a dust bag to the extraction
adapter. Otherwise the extraction system can
become clogged.
To ensure optimum extraction, the extraction adapter
24 must be cleaned regularly.
External Dust Extraction
Connect the vacuum hose 30 to a vacuum cleaner
(accessory). An overview for connecting to various
vacuum cleaners can be found at the end of this man-
ual.
The machine can be plugged directly into the recep-
tacle of a Bosch all-purpose vacuum cleaner with
remote starting control. The vacuum cleaner starts
automatically when the machine is switched on.
The vacuum cleaner must be suitable for the material
being worked.
When vacuuming dry dust that is especially detrimen-
tal to health or carcinogenic, use a special vacuum
cleaner.
Operation
Operating Modes
f Before any work on the machine itself, pull
the mains plug.
Adjusting the Cutting Depth (see figure C)
f Adjust the cutting depth to the thickness of
the workpiece. Less than a full tooth of the blade
teeth should be visible below the workpiece.
Loosen the clamping lever 25. For a smaller cutting
depth, pull the saw away from the base plate 15; for a
larger cutting depth, push the saw toward the base
plate 15. Adjust the desired cutting depth at the cut-
ting -depth scale. Tighten the clamping lever 25 again.
The tightening tension of the clamping lever 25 can be
readjusted. For this, unscrew the clamping lever 25,
and screw it back again turned offset by at least 30°
in anticlockwise direction.
Adjusting the Cutting Angle
It is best to place the machine on the face side of the
blade guard 18.
Loosen the wing bolts 8 and 16. Tilt the saw side-
wards. Adjust the desired measure on the scale 6.
Tighten the wing bolts 8 and 16 again.
Note: For bevel cuts, the cutting depth is smaller than
the setting indicated on the cutting-depth scale 26.
Cutting Marks
The 0° cutting mark (11) indicates the position of the
saw blade for right-angled cuts. The 45° cutting mark
(10) indicates the position of the saw blade for 45°
cuts.
For precise cuts, position the circular saw against the
workpiece as shown in the figure. It is best to carry out
a trial cut.
Starting Operation
f Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V can
also be operated with 220 V.
Switching On and Off
To start the machine, first push the lock-off button for
the On/Off switch 2 and then press the On/Off
switch 1 and keep it pressed.
To switch off the machine, release the On/Off switch
1.
Note: For safety reasons, the On/Off switch 1 cannot
be locked; it must remain pressed during the entire
operation.
Reduced starting current (GKS 55 CE)
The electronic reduced starting current limits the
power consumption when switching the tool on and
enables operation from a 13 ampere fuse.
Constant Electronic Control (GKS 55 CE)
Constant electronic control holds the speed constant
at no-load and under load, and ensures uniform work-
ing performance.
Speed preselection (GKS 55 CE)
The required speed can be preselected with the
thumbwheel 3 (also while running).
The required speed depends on the saw blade being
used and on the material being worked (see overview
of saw blades at the end of these operating instruc-
tions).
0 45
0 45
OBJ_BUCH-244-001.book Page 21 Friday, November 3, 2006 10:39 AM
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GKS 55 CE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GKS 55 CE in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 11,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info