786132
19
Verklein
Vergroot
Pagina terug
1/275
Pagina verder
English | 19
ons, it is only possible to check the state of charge when the
power tool is at a standstill.
Press the on/off switch (4) halfway or completely to display
the state of charge.
LED Capacity
Continuous lighting 3 x green ≥ 2/3
Continuous lighting 2 x green ≥ 1/3
Continuous lighting 1 x green < 1/3
Flashing light 1 x green Reserve
If no LED lights up after pressing the on/off switch (4), then
the battery is defective and must be replaced.
Inserting/changing the circular saw blade
uRemove the battery before carrying out any work on
the power tool.
uWear protective gloves when fitting the saw blade.
Danger of injury when touching the saw blade.
uOnly use saw blades that match the specifications
given in this operating manual and that are tested and
marked in accordance with EN 847-1
uThe permitted speed of the application tool must be at
least equal to the maximum speed marked on the
power tool. If accessories run faster than their rated
speed, they may break and fly off.
uDo not use abrasive wheels as the application tool un-
der any circumstances.
Selecting the saw blade
You will find an overview of recommended saw blades at the
end of these operating instructions.
Removing the saw blade (see figure A)
To change tools, we recommend that you place the power
tool down on the front side of the motor housing.
Press and hold the spindle lock button (6).
uDo not press the spindle lock button (6) while the saw
spindle is moving. The power tool may become damaged
if this happens.
Use the hex key (5) to undo the clamping bolt (25) in ro-
tational direction .
Swing the retracting blade guard (21) back and hold on
to it firmly.
Remove the clamping flange (24) and the saw blade (23)
from the saw spindle (20).
Fitting the saw blade (see figure A)
To change tools, we recommend that you place the power
tool down on the front side of the motor housing.
Clean the saw blade (23) and all the clamping elements
to be fitted.
Swing the retracting blade guard (21) back and hold on
to it firmly.
Place the saw blade (23) on the mounting flange (22).
The cutting direction of the teeth (direction of the arrow
on the saw blade) must match the rotational direction of
the arrow on the protective guard (21).
Attach the clamping flange (24) and screw in the clamp-
ing bolt (25) in rotational direction . Ensure that the
mounting flange (22) and clamping flange (24) are in-
stalled in the correct position.
Press and hold the spindle lock button (6).
Use the hex key (5) to tighten the clamping bolt (25) in
rotational direction . The tightening torque should be
6–9Nm, which corresponds to hand-tight plus ¼ turn.
Dust/chip extraction
The dust from materials such as lead paint, certain types of
wood, minerals and metal can be harmful to human health.
Touching or breathing in this dust can trigger allergic reac-
tions and/or cause respiratory illnesses in the user or in
people in the near vicinity.
Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be machined by specialists.
To achieve a high level of dust extraction, use a suitable
dust extractor together with this power tool.
Provide good ventilation at the workplace.
It is advisable to wear a P2 filter class breathing mask.
The regulations on the material being machined that apply in
the country of use must be observed.
uAvoid dust accumulation at the workplace. Dust can
easily ignite.
Fitting the dust extraction adapter (see figure B)
Fasten the dust extraction adapter (29) to the base plate (7)
using the fastening screw (28).
A dust extraction hose with a diameter of 19mm can be con-
nected to the dust extraction adapter (29).
uThe dust extraction adapter must only be fitted if an
external dust extraction system is connected. Other-
wise the extraction duct can become clogged.
uNo dust bags should be connected to the dust extrac-
tion adapter. Otherwise the extraction system can be-
come clogged.
To ensure optimum extraction, the dust extraction adapter
(29) must be cleaned regularly.
External dust extraction
Connect the dust extraction hose (30) to a dust extractor
(accessory). You will find an overview of how to connect to
various dust extractors at the end of these operating instruc-
tions.
The dust extractor must be suitable for the material being
worked.
When extracting dry dust that is especially detrimental to
health or carcinogenic, use a special dust extractor.
Bosch Power Tools 1 609 92A 7TA | (17.05.2022)
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GKS 12V-26 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GKS 12V-26 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 6.39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info