78640
18
Verklein
Vergroot
Pagina terug
1/107
Pagina verder
18 | English
1 609 929 T41 | (12.11.09) Bosch Power Tools
Replacing the Drill Chuck (see figure C)
To dismount the key type drill chuck 1 position
an open-end spanner (size 27 mm) against the
nut on the drive spindle. Firmly hold the key
type drill chuck with one hand and with the oth-
er hand, turn the open-end spanner in anticlock-
wise direction until the drill chuck is released
from the tapered drill spindle.
f Keep the drill spindle taper and the drill
hole of the drill chuck free from grease and
debris.
To mount the key type drill chuck 1 turn the nut
on the drive spindle in clockwise direction to
the stop. Place the key type drill chuck without
force onto the drive spindle until it is tightly
seated. Apply light blows with a rubber hammer
onto the face side of the key type drill chuck 1
to ensure tight seating of the chuck. Pay atten-
tion that the clamping jaws of the key type drill
chuck do not project, in order not to damage
them.
Dust/Chip Extraction
f Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
Provide for good ventilation of the work-
ing place.
It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
Operation
Starting Operation
f Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V
can also be operated with 220 V.
Reversing the Rotational Direction
The rotational direction switch 6 is used to re-
verse the rotational direction of the machine.
However, this is not possible with the On/Off
switch 4 actuated.
Right rotation: For drilling and screwdriving,
press the rotational direction switch 6 down-
ward to “R”.
Left rotation: For loosening and unscrewing
screws and nuts, press the rotational direction
switch 6 upward to “L”.
Gear Selection, Mechanical
f Actuate the gear selector 2 only when the
machine is at a standstill.
Two speed ranges can be preselected with the
gear selector 2.
1st gear:
Low speed range; for working with
large drilling diameter.
2nd gear:
Higher speed range; for working
with small drilling diameter.
If the gear selector 2 cannot be fully engaged,
lightly rotate the drive spindle with the drill bit
by twisting the drill chuck.
OBJ_BUCH-21-004.book Page 18 Thursday, November 12, 2009 11:37 AM
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GBM 16-2 RE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GBM 16-2 RE in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info