Handleiding Bosch GAS 35 H AFC (pagina 22 van 313) (Alle talen)

786485

Verklein

Vergroot

Pagina terug

1/313

Pagina verder

22 | English

Insofar as materials with or without an exposure limit of

≥1mg/m3 (dust class L materials) are extracted, these can

be sucked straight into the container.

WARNING The dust extractor contains dust

particles that pose a risk to health.

Emptying and maintenance procedures, including the

disposal of dust containers, should only be carried out by

professionals. Suitable protective equipment is re-

quired. Do not operate the vacuum cleaner unless the

complete filter system is correctly inserted. Otherwise,

you are putting your health at risk.

Inserting the disposal bag

– Open the catches (13) and remove the top part of the va-

cuum cleaner (12).

– Insert the disposal bag (27) into the container (1) with

the inlet facing forwards.

– Pull the inlet over the connection flange and all the way

into the recess of the connection flange.

– Make sure that the disposal bag (27) touches all the in-

side walls of the container (1).

– Fold the rest of the disposal bag (27) over the edge of the

container (1).

– Put the top part of the vacuum cleaner (12) on and close

the catches (13).

Removing and sealing the disposal bag

– Seal the container(1) using the sealing plug for extrac-

tion connection(2).

– Open the catches (13) and remove the top part of the va-

cuum cleaner (12).

– Pull the full disposal bag(27) backwards out of the con-

nection flange.

– Seal the disposal bag(27) tightly below the extraction

connection opening and the ventilation hole using the

cable tie provided.

– Carefully take the disposal bag(27) out of the

container(1) without damaging it.

When doing so, make sure that the disposal bag does not

scrape against the connection flange or other sharp ob-

jects.

– Wipe the container(1) from time to time using a non-ab-

rasive off-the-shelf cleaning product and leave it to dry.

Inserting the safety filter bag

– Open the catches (13) and remove the top part of the va-

cuum cleaner (12).

– Insert the safety filter bag(26) into the container(1) with

the inlet facing forwards.

– Pull the inlet over the connection flange and all the way

into the recess of the connection flange.

– Make sure that the black plastic bag of the safety filter

bag(26) touches all the inside walls of the container(1).

– Make sure that the vacuum compensation hole is in the

container.

– Fold the rest of the black plastic bag over the edge of the

container(1).

– Put the top part of the vacuum cleaner (12) on and close

the catches (13).

Removing and sealing the safety filter bag

– Seal the container(1) using the sealing plug for extrac-

tion connection(2).

– Open the catches (13) and remove the top part of the va-

cuum cleaner (12).

– Pull the full safety filter bag(26) backwards out of the

connection flange.

– Seal the opening of the safety filter bag by pushing the

closing flap over the opening.

– Seal the black plastic bag tightly with the cable ties

provided.

– Remove the adhesive label next to the vacuum compensa-

tion hole and use it to seal the hole.

– Carefully take the sealed safety filter bag out of the

container(1) without damaging it. When doing so, make

sure that the safety filter bag does not scrape against the

connection flange or other sharp objects.

– Wipe the container(1) from time to time using a non-ab-

rasive off-the-shelf cleaning product and leave it to dry.

Fitting the rubber lip (wet extraction) (see

figureE)

Note: The requirements for the degree of penetration (dust

class H) have only been verified for dry extraction.

– Use a suitable tool to lift the brush inserts(31) out of the

floor nozzle(32).

– Place the rubber lips(30) in the floor nozzle(32).

Note: The textured side of the rubber lips must be facing

outwards.

Attaching the L-BOXX (see figureF)

You can attach an L-Boxx to the top part of the dust extractor

for transporting the extractor and to provide space-saving

storage for extractor accessories and/or the power tool.

– Click the L-Boxx onto the adapters (11).

uDo not carry the dust extractor by the carrying handle

of the attached L-Boxx. The dust extractor is too heavy

for the carrying handle of the L-Boxx. There is a risk of in-

jury and damage if you do this.

Operation

uPull the plug out of the socket before cleaning or per-

forming maintenance on the vacuum cleaner, making

tool adjustments, changing accessories or putting

away the vacuum cleaner. This safety measure prevents

the vacuum cleaner from being started accidentally.

When operating the dust extractor, ensure that the lockable

castors on the dust extractor are blocked to prevent the dust

extractor from rolling away unintentionally. Test the correct

functioning of the castors on the relevant surface before op-

eration.

1 609 92A 7Z8 | (23.06.2022) Bosch Power Tools

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Bosch GAS 35 H AFC Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info