708039
19
Verklein
Vergroot
Pagina terug
1/111
Pagina verder
English | 19
Bosch Power Tools 1 609 92A 29Y | (5.8.16)
Slide the setting ring 17 backward until the distance matches
the required drilling depth X or place a wall plug on the rail
and slide the setting ring 17 backward to the wall plug. Lock
the setting ring 17 by turning it to the right . Take the wall
plug out of the rail again. The drilling depth now matches the
set length X on the rail.
Note: It is important to have the exact drilling depth when us-
ing wall plugs. If the drilled hole is too deep, the wall plug will
slip too far into the wall or workpiece. If the hole is too small,
the wall plug will stick out.
Emptying the Dust Box (see figure G)
The dust box 11 is enough for drilling about 25 holes in ma-
sonry at a drilling depth of 30 mm with a drill bit diameter of
6mm.
To remove the dust box 11, press the side-mounted un-
locking buttons 12 and pull the dust box off in a downward
direction.
–Empty the dust box 11 and reinsert it (until it can be heard
to engage).
Removing the Drill Assistant
Press and hold the clip 16 of the dust collection device 13
and pull the dust box 13 off toward the front.
Turn the wing bolt 18 counterclockwise until the auxiliary
handle 9 can be moved and pull the auxiliary handle 9 off
the power tool.
Unlock the setting ring 17 by turning it to the left .
Hold the auxiliary handle 9 in place and slide the rail to-
wards the auxiliary handle until it can be heard to engage.
Dust Extraction/Dust Box
Dust from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one’s health. Touching or breathing-in the dust can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
Certain dust, such as oak or beech dust, is considered car-
cinogenic, especially in connection with wood-treatment
additives (chromate, wood preservative). Materials con-
taining asbestos may only be worked by specialists.
Use a dust extraction system suitable for the material
being worked.
Provide for good ventilation of the working place.
It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
Prevent dust accumulation at the workplace. Dust can
easily ignite.
Use the dust box only when working on concrete and
stone. Wood chips and plastic chips can easily lead to
clogging.
Warning: Danger of fire! Do not work on any metallic
materials with the dust box mounted. Hot metal chips
can ignite parts of the dust box.
Please observe the following instructions to optimise your use
of the dust box:
Ensure that the dust box is placed flush against the work-
piece or wall. This also makes it easier to drill at a right an-
gle.
After reaching the desired drilling depth, pull the drill bit
out of the drill hole first and then switch off the impact drill.
The dust protection ring 15 can wear, especially when
working with large drill-bit diameters. Replace the dust
protection ring when worn/damaged.
Changing the Tool
Keyless Chuck (EasyImpact 500/550/550 +
Drill Assistant/5500) (see figure H)
Hold the rear sleeve 2 of the keyless chuck 3 tight and turn the
front sleeve 1 in rotation direction , until the tool can be in-
serted. Insert the tool.
Hold the rear sleeve 2 of the keyless chuck 3 tight and firmly
turn the front sleeve 1 in rotation direction by hand.
Keyless Chuck (EasyImpact 570/5700/6000)
(see figure I)
The drill spindle is locked when the On/Off switch 7 is not
pressed. This makes quick, convenient and easy changing of
the tool in the drill chuck possible.
Open the keyless chuck 3 by turning in rotation direction ,
until the tool can be inserted. Insert the tool.
Firmly tighten the collar of the keyless chuck 3 by hand in ro-
tation direction until the locking action (“click”) is no longer
heard. This automatically locks the chuck.
The locking is released again to remove the tool when the col-
lar is turned in the opposite direction.
Key Type Drill Chuck (EasyImpact 540) (see figure J)
Wear protective gloves when changing the tool. The
drill chuck can become very hot during longer work peri-
ods.
Open the key type drill chuck 28 by turning until the tool can
be inserted. Insert the tool.
Insert the chuck key 27 into the corresponding holes of the
key type drill chuck 28 and clamp the tool uniformly.
OBJ_BUCH-2824-001.book Page 19 Friday, August 5, 2016 1:28 PM
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch EasyImpact 5700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch EasyImpact 5700 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 20,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info