Handleiding Bosch EasyImpact 550 plus Drill Assistant (pagina 19 van 111) (Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins)

708036

Verklein

Vergroot

Pagina terug

1/111

Pagina verder

English | 19

Bosch Power Tools 1 609 92A 29Y | (5.8.16)

Slide the setting ring 17 backward until the distance matches

the required drilling depth X or place a wall plug on the rail

and slide the setting ring 17 backward to the wall plug. Lock

the setting ring 17 by turning it to the right . Take the wall

plug out of the rail again. The drilling depth now matches the

set length X on the rail.

Note: It is important to have the exact drilling depth when us-

ing wall plugs. If the drilled hole is too deep, the wall plug will

slip too far into the wall or workpiece. If the hole is too small,

the wall plug will stick out.

Emptying the Dust Box (see figure G)

The dust box 11 is enough for drilling about 25 holes in ma-

sonry at a drilling depth of 30 mm with a drill bit diameter of

6mm.

– To remove the dust box 11, press the side-mounted un-

locking buttons 12 and pull the dust box off in a downward

direction.

–Empty the dust box 11 and reinsert it (until it can be heard

to engage).

Removing the Drill Assistant

– Press and hold the clip 16 of the dust collection device 13

and pull the dust box 13 off toward the front.

– Turn the wing bolt 18 counterclockwise until the auxiliary

handle 9 can be moved and pull the auxiliary handle 9 off

the power tool.

– Unlock the setting ring 17 by turning it to the left .

– Hold the auxiliary handle 9 in place and slide the rail to-

wards the auxiliary handle until it can be heard to engage.

Dust Extraction/Dust Box

 Dust from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health. Touching or breathing-in the dust can cause

allergic reactions and/or lead to respiratory infections of

the user or bystanders.

Certain dust, such as oak or beech dust, is considered car-

cinogenic, especially in connection with wood-treatment

additives (chromate, wood preservative). Materials con-

taining asbestos may only be worked by specialists.

– Use a dust extraction system suitable for the material

being worked.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

 Prevent dust accumulation at the workplace. Dust can

easily ignite.

 Use the dust box only when working on concrete and

stone. Wood chips and plastic chips can easily lead to

clogging.

 Warning: Danger of fire! Do not work on any metallic

materials with the dust box mounted. Hot metal chips

can ignite parts of the dust box.

Please observe the following instructions to optimise your use

of the dust box:

– Ensure that the dust box is placed flush against the work-

piece or wall. This also makes it easier to drill at a right an-

gle.

– After reaching the desired drilling depth, pull the drill bit

out of the drill hole first and then switch off the impact drill.

– The dust protection ring 15 can wear, especially when

working with large drill-bit diameters. Replace the dust

protection ring when worn/damaged.

Changing the Tool

Keyless Chuck (EasyImpact 500/550/550 +

Drill Assistant/5500) (see figure H)

Hold the rear sleeve 2 of the keyless chuck 3 tight and turn the

front sleeve 1 in rotation direction , until the tool can be in-

serted. Insert the tool.

Hold the rear sleeve 2 of the keyless chuck 3 tight and firmly

turn the front sleeve 1 in rotation direction  by hand.

Keyless Chuck (EasyImpact 570/5700/6000)

(see figure I)

The drill spindle is locked when the On/Off switch 7 is not

pressed. This makes quick, convenient and easy changing of

the tool in the drill chuck possible.

Open the keyless chuck 3 by turning in rotation direction ,

until the tool can be inserted. Insert the tool.

Firmly tighten the collar of the keyless chuck 3 by hand in ro-

tation direction  until the locking action (“click”) is no longer

heard. This automatically locks the chuck.

The locking is released again to remove the tool when the col-

lar is turned in the opposite direction.

Key Type Drill Chuck (EasyImpact 540) (see figure J)

 Wear protective gloves when changing the tool. The

drill chuck can become very hot during longer work peri-

ods.

Open the key type drill chuck 28 by turning until the tool can

be inserted. Insert the tool.

Insert the chuck key 27 into the corresponding holes of the

key type drill chuck 28 and clamp the tool uniformly.

OBJ_BUCH-2824-001.book Page 19 Friday, August 5, 2016 1:28 PM

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Bosch EasyImpact 550 plus Drill Assistant Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info