766855
15
Verklein
Vergroot
Pagina terug
1/93
Pagina verder
English | 15
Note: The battery is supplied partially charged. To ensure
the maximum performance of the battery, use the power ad-
aptor to fully charge the battery before first use.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool stops moving.
uDo not continue to press the On/Off switch after the
power tool has automatically switched off. The battery
can be damaged.
Open the flap(9).
Connect the USB port(8) to the power supply(17).
Plug the power supply(17) into the plug socket.
The charging process will begin. The battery charge
indicator(7) indicates the charging progress.
During the charging process, the power tool is deactivated
and cannot be used.
If you are not planning to use the power tool again soon, dis-
connect the power adaptor(17) from the mains.
Battery charge indicator
The battery charge indicator (7) indicates the state of
charge for a few seconds when the on/off switch (5) is half
or fully pressed.
After charging, the battery charge indicator (7) goes out a
few minutes after the battery has been fully charged.
Capacity LED when switched
on LED when charging
100% Green (continuous) Green (continuous)
100%−
50% Green (continuous) Green (flashing)
50%−
20% Yellow (continuous) Green (flashing)
20%−5% Red (continuous) Green (flashing)
5%−0% Red (flashing) Green (flashing)
Note: If the battery charge indicator is flashing white, the
temperature is outside the permitted temperature range.
Once the permitted temperature range has been reached
again, the charging process automatically resumes or the
power tool can be used once again.
Selecting Tools
An application tool with hexagonal shank with groove or SDS
quick shank is required for drilling and hammer drilling.
For screwdriving, only use screwdriver bits that have a
hexagonal shank with groove (14). Other short screwdriver
bits (16) can be inserted using a universal bit holder with
hexagonal shank with groove (15).
You will find a selection of suitable application tools in the
accessories overview at the end of these operating instruc-
tions.
Changing the Tool
The tool holder can also accommodate dif-
ferent application tools with a hexagonal
shank with groove and SDS quick shank.
The tool holder allows for simple and con-
venient tool-free changing of the application
tool.
As a requirement of the system, the application tool can
move freely. This causes a certain radial run-out at no-load,
which has no effect on the accuracy of the drill hole, as the
drill bit centres itself upon drilling.
The dust protection cap (2) largely prevents the penetration
of drilling dust into the tool holder during operation. When
inserting the tool, make sure that the dust protection cap (2)
does not become damaged.
uReplace a damaged dust protection cap immediately.
It is recommended that you have use an after-sales
service for this.
Inserting the application tool (see figure B)
Clean the shank of the application tool.
Using a gradual turning motion, push the application tool
into the tool holder until it locks itself in place.
Check it is locked by pulling the tool.
Removing the application tool (seefigureC)
Push the locking sleeve (3) back and remove the applica-
tion tool.
Dust/Chip Extraction
Dust from materials such as lead-containing coatings, some
wood types, minerals and metal can be harmful to one’s
health. Touching or breathing-in the dust can cause allergic
reactions and/or lead to respiratory infections of the user or
bystanders.
Certain dust, such as oak or beech dust, is considered carci-
nogenic, especially in connection with wood-treatment ad-
ditives (chromate, wood preservative). Materials containing
asbestos may only be worked by specialists.
Provide for good ventilation of the working place.
It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the ma-
terials to be worked.
uAvoid dust accumulation at the workplace. Dust can
easily ignite.
Operation
Start-up
uEnsure that the flap of the USB Type-C® port(9) is closed
during operation. This will prevent dust from getting in.
Bosch Power Tools 1 609 92A 4MK | (28.01.2021)
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch EasyHammer 12V bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch EasyHammer 12V in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 3,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info