Auto
mode indicator
3. Press > once to confirm, the display will show temperature
flashing.
4. Press + or - buttons to adjust temperature and press > to
start holiday count down time.
Alternatively after 10 seconds the temperature will stop flashing
and holiday count down time will start. Display shows count
down time and ambient room temperature.
5. To exit the holiday mode press the < or > once, to return to
auto.
User Options
User Options (shown in table on page 8) can be accessed from
Auto or Man by pressing < and > simultaneously for 3 seconds.
When you have accessed the User Options Menu press > to
scroll through selectable options.
The settings for each option can be changed by pressing + or -
as required.
Pressing > accepts the change and moves to the next option.
NOTE: To exit User Options press < and > simultaneously
for 3 seconds.
Alternatively, not pressing any buttons for 2 minutes will cause
the Programmer to return to Auto.
This figure opposite shows option “01 24” (24 hour clock).
Only options that have been accepted by pressing > will be
changed.
