Handleiding Bosch BGS51262 (pagina 39 van 142) (Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins)

536635

Verklein

Vergroot

Pagina terug

1/142

Pagina verder

Figure

● Unlock the telescopic tube by moving the sliding

switch in the direction of the arrow and slide one

tube into the other.

igure

To store the appliance, use the storage aid on the

underside.

a)Stand the appliance up by the handle.

b)Slide the hook on the floor tool into the storage aid.

mptying the dust container

Figure

In order to achieve good vacuuming results, the dust

container should be emptied after every use or, at the

latest, when dust or dirt has visibly collected on the

fluff filter or when dust at one point in the container

has reached the height of the marking.

When emptying the dust container, always check how

dirty the fluff filter is and, if necessary, clean it as

detailed in the "Cleaning the fluff filter" instructions.

Figure

a)Open the appliance lid by pulling the locking tab.

b)Use the handle to remove the dust container from

the appliance.

Figure

a)Release the filter unit of the dust container by pres-

sing the release button.

b)Take the filter unit out of the dust container and

empty the dust container.

Figure

a)Insert the filter unit into the dust container, making

sure it is correctly seated. The arrow on the filter

cover must point in the direction of the locking tab.

b)Press on the container lid until you hear it click into

place.

c)When reinserting the dust container into the applian-

ce, make sure it is correctly seated. Close the appli-

ance lid until the locking tab clicks into place again.

Caution

If you notice any resistance when closing the lid,

check that the filter is complete and that the filter

and dust container are correctly seated.

Filter care

Cleaning the plate filter

Your appliance is equipped with a "Sensor Control"

Function.

Figure + Figure .

This function constantly monitors whether your vacuum

cleaner is reaching its optimum power level. The indica-

tor light lets you know when you need to clean the

plate filter, so that the vacuum cleaner can reach its

optimum power level once more.

23*21*

acuum cleaner with “RotationClean” function

Figure

The indicator lights up blue when the appliance is wor-

king at its optimum level. Once the indicator turns red

and flashes, the plate filter must be cleaned. The appli-

nce is automatically adjusted back to the lowest

power setting.

Figure

● Switch the appliance off in order to clean the plate

filter.

aution: the filter can only be cleaned if the appli-

ance is switched off.

● Open the appliance lid by pulling the locking tab.

● To clean the plate filter, turn the knob at least three

turns through 180°.

You can also clean the filter if the suction is becoming

less powerful, even if the indicator has not lit up. We

recommend that you clean the plate filter each time

before emptying the dust container. It must be cleaned

at the latest when the “Sensor Control” indicator lights

up.

If the indicator flashes three times in quick succession,

even though the plate filter is clean, this is probably

due to a dirty fluff filter or a blockage. In this case, the

appliance automatically adjusts to the lowest power

setting and the indicator lights up red permanently.

● Switch the appliance off, empty the dust container

and clean the fluff filter according to the instructions

in "Cleaning the fluff filter".

Figure

Vacuum cleaner with “SelfClean” function

Figure

The indicator lights up blue when the appliance is wor-

king at its optimum level. Once the indicator turns red

and flashes, the appliance switches off automatically

Filter cleaning is activated and performed by the inte-

grated cleaning motor.

If the appliance cleans three times in quick succession,

this is probably due to a dirty fluff filter or a blockage.

In this case, the appliance automatically adjusts to the

lowest power setting and the indicator lights up red.

● Switch the appliance off, empty the dust container

and clean the fluff filter according to the instructions

in "Cleaning the fluff filter".

Figure

If required, you can also activate the cleaning procedu-

re manually by pressing the "Clean" filter cleaning but-

ton when the appliance is switched on.

If suction power is reducing, you can also clean the fil-

ter even if the indicator has not lit up. We recommend

that you clean the plate filter each time before empty-

ing the dust container.

22*

23*

24*

*dependent on model

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Bosch BGS51262 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info