809356

Bosch ARC R-3 IR - Air Conditioner Remote Controller Handleiding

5
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
6720891707 (2019/08) GB
Air Conditioner
Remote Controller
Operating Instructions
The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer
for details.
Thank you very much for purchasing our air conditioner. Please read this owner’s manual carefully before using your air conditioner. Ensure to save
this manual for future reference.
2 Remote Controller – 6720891707 (2019/08)
Remote Controller Specifications
Table of Content
1 Remote Controller Specifications ....................................... 2
2 Operation of buttons .......................................................... 3
3 Indicators on LCD .............................................................. 6
4 How to use the buttons ....................................................... 7
4.1 Auto operation ........................................................ 7
4.2 Cooling /Heating/Fan operation ................................. 7
4.3 Dehumidifying operation .......................................... 8
4.4 Timer operation ....................................................... 9
5 Example of timer setting .................................................. 10
6 Handling the remote controller ......................................... 12
6.1 Location of the remote controller ............................. 12
6.2 Using the remote controller holder (optional) ............. 12
6.3 Replacing batteries ................................................ 12
NOTICE:
fButtons design is based on typical model and might be slightly
different from the actual one you purchased the actual shape shall
prevail.
fAll the functions described are accomplished by the unit. If the unit
has no this feature, there is no corresponding operation happened
when press the relative button on the remote controller
fWhen there are wide differences between “Remote controller
Illustration” and “USER’S MANUAL” on function description, the
description of USER’S MANUAL shall prevail.
1 Remote Controller Specifications
Model ARC R-3 IR
Rated Voltage 3.0V (AA Batteries)
Signal Receiving
Range
8 m
Environment –5°C~ 60°C
Table 1.
MODE
FAN
TEMP
SLEEP
SWING D IRECT
LED FOLLOW ME
TURBO SELF CLEAN
ON/OFF
SILENCE
FP
TIMER
ON
TIMER
OFF
ARC R-3 IR
Fig. 1.
Remote Controller – 6720891707 (2019/08) 3
Operation of buttons
2 Operation of buttons
T
C
ERID
G
NIW
S
14
13
12
11
7
6
8
10
9
3
4
2
1
FF
O
REMT
N
O
REMIT
P F
E
C
NEL
S
FF
O/
N
O
NAEL
C
F LE
SO
BR
U
T
EMW
O
LL
O
FD EL
PEEL
S
PMET
NFA
E
D
O
M
I
I
ARC R-3 IR
Fig. 2.
1. ON/OFF Button
This button turns the air conditioner ON and OFF.
2. MODE Button
Press this button to modify the air conditioner mode in a sequence
of following:
AUTO COOL DRY HEAT FAN
NOTICE:
Please do not select HEAT mode if the machine you purchased is cooling
only type. Heat mode is not supported by the cooling only appliance.
3. FAN Button
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
NOTICE:
You can not switch the fan speed in AUTO or DRY mode.
4. SLEEP Button
•Active/Disable sleep function. It can maintain the most comfortable
temperature and save energy. This function is available on COOL,
HEAT or AUTO mode only.
•For the detail, see “sleep operation” in “USER’S MANUAL”.
NOTICE:
While the unit is running under SLEEP mode, it would be cancelled if
MODE, FAN SPEED or ON/OFF button is pressed.
5. TURBO Button
Active/Disable Turbo function. Turbo function enables the unit to
reach the preset temper- ature at cooling or heating operation in
the shortest time(if the indoor unit does not support this function,
there is no corresponding operation happened when pressing this
button.)
6. SELF CLEAN Button
Active/Disable Self Clean function.
4 Remote Controller – 6720891707 (2019/08)
Operation of buttons
MODE
FAN
TEMP
SLEEP
LE D FOLL OW M E
TU RBO SE LF C LEAN
ON/OFF
SILENCE
FP
TIMER
ON
TIMER
OFF
1
2
4
3
9
10
8
6
7
11
12
13
14
SWING D IRECT
ARC R-3 IR
Fig. 3.
7. UP Button ( )
Push this button to increase the indoor temperature setting in 1°C
increments to 30°C.
DOWN Button ( )
Push this button to decrease the indoor temperature setting in 1°C
increments to 17°C.
8. SILENCE/FP Button
•Active/Disable SILENCE function. If pushing more than 2 seconds,
the ‘FP’ function will be activated, pushing more than 2 seconds
again to disable.
•When the Silence function is activated, the compressor will operate
at low frequency and the indoor unit will bring faint breeze, which
will reduce the noise to the lowest level and create a quiet and com-
fortable room for you. Due to low frequency operation of compres-
sor, it may result in insufficient cooling and heating capacity.
•The ‘FP’ function can only be activated during the heating opera-
tion(only when the setting mode is HEAT). The unit will operate at
a setting temperature of 8°C.The display window of indoor unit will
display ‘FP’. Press the buttons of ON/OFF, SLEEP, ‘FP’, MODE, FAN
SPEED, UP or DOWN while operating will cancel the ‘FP’ function.
9. TIMER ON Button
Press this button to initiate the auto-on time sequence. Each press
will increase the auto-timed setting in 30 minutes increments.
When the setting time displays 10.0, each press will increase the
auto- timed setting 60 minutes increments. To cancel the auto-
timed program, simply adjust the auto-on time to 0.0.
10. TIMER OFF Button
Press this button to initiate the auto-off time sequence. Each press
will increase the auto-timed setting in 30 minutes increments.
When the setting time displays 10.0, each press will increase the
auto-timed setting 60 minutes increments. To cancel the auto-
timed program, simply adjust the auto-off time to 0.0.
Remote Controller – 6720891707 (2019/08) 5
Operation of buttons
T
C
ER
I
D
G
NW
S
14
13
12
11
7
6
8
10
9
3
4
2
1
FF
O
R
EMT
N
O
REMT
P F
E
C
NEL
S
FF
O/
N
O
NAEL
C
F LE
SO
BR
U
T
EMW
O
LL
O
FD EL
P
EEL
S
PMET
NFA
ED
O
M
I
I
I
I
ARC R-3 IR
Fig. 4.
MODE
FAN
TEMP
SL EEP
LE D FOLLOW ME
TU RB O SELF CL EA N
ON /OFF
SILENCE
FP
TI MER
ON
TI ME R
OFF
1
2
4
3
9
10
8
6
7
11
12
13
14
SW IN G DIRECT
ARC R-3 IR
Fig. 5.
11. Swing Button
Used to stop or start horizontal louver auto swing feature.
DIRECT Button
Used to change the louver movement and set the desired up/down
air flow direction. The louver changes 6° in angle for each press.
12. FOLLOW ME Button
Push this button to initiate the Follow Me feature, the remote
display is actual temperature at its location. The remote control will
send this signal to the air conditioner every 3 minutes interval until
press the Follow Me button again. The air conditioner will cancel
the Follow Me feature automatically if it does not receive the signal
during any 7 minutes interval.
13. LED Button
Disable/Active indoor screen Display. When pushing the button,
the indoor screen display is cleared, press it again to light the
display.
6 Remote Controller – 6720891707 (2019/08)
Indicators on LCD
3 Indicators on LCD
Information are displayed when the remote controller is powered up.
Fig. 6.
Mode display
AUTO COOL DRY
HEAT FAN
Displayed when data transmitted.
Displayed when remote controller is ON.
Battery display (low battery detection).
Not available for this unit.
Displayed when TIMER ON time is set.
Displayed when TIMER OFF time is set.
Show set temperature or room temperature, or time under
TIMER setting.
Displayed in Sleep Mode operation.
Indicated that the air conditioner is operating in Follow me
mode.
Displayed when fresh feature is activated (some units).
Displayed when silence feature is activated.
Fan speed indication
Low speed
Medium speed
High speed
Auto fan speed
NOTICE:
All indicators shown in the figure are for the purpose of clear
presentation. But during the actual operation only the relative functional
signs are shown on the display window.
Remote Controller – 6720891707 (2019/08) 7
How to use the buttons
4 How to use the buttons
MODE
FAN
TEMP
SLEEP FRESH
LE D FOLL OW M E
TU RBO SE LF C LEAN
ON/OFF
SILENCE
FP
TIMER
ON
TIMER
OFF
3
1
2
SWINGDIRECT
Fig. 7.
MODE
FAN
TEMP
SLEEP FRESH
LE D FOLL OW M E
TU RBO SE LF C LEAN
ON/OFF
TIMER
ON
TIMER
OFF
4
1
3
2
SILENCE
FP
SWINGDIRECT
Fig. 8.
4.1 Auto operation
Ensure that power is available. The OPERATION indicator on the display
panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the desired temperature.
The temperature can be set within a range of 17°C~30°C in 1°C
increments.
3. Press the ON/OFF button to start the air conditioner.
NOTICE:
1. In the Auto mode, the air conditioner can logically choose the mode
of Cooling, Fan, and Heating by sensing the difference between the
actual ambient room temperature and the setting temperature on
the remote controller.
2. In the Auto mode, you can not switch the fan speed. It has already
been automatically controlled.
3. If the Auto mode is not comfortable for you , the desired mode can
be selected manually.
4.2 Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL, HEAT (cooling & heating
models only) or FAN mode.
2. Press the UP/DOWN buttons to set the desired temperature.
The temperature can be set within a range of 17°C~30°C in 1°C
increments.
3. Press the FAN button to select the fan speed in four steps – Auto,
Low, Med,or High.
4. Press the ON/OFF button to start the air conditioner.
NOTICE:
In the FAN mode, the setting temperature is not displayed in the remote
controller and you are not able to control the room temperature either. In
this case, only step 1, 3 and 4 may be performed.
8 Remote Controller – 6720891707 (2019/08)
How to use the buttons
SILENCE
FP
MODE
FAN
TEMP
SLEEP FRESH
LE D FOLL OW M E
TU RBO SE LF C LEAN
ON/OFF
TIMER
ON
TIMER
OFF
3
1
2
SWINGDIRECT
Fig. 9.
4.3 Dehumidifying operation
Ensure that power is available. The OPERATION indicator on the display
panel of the indoor unit starts flashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the desired temperature.
The temperature can be set within a range of 17°C~30°C in 1°C
increments.
3. Press the ON/OFF button to start the air conditioner.
NOTICE:
In the Dehumidifying mode, you can not switch the fan speed. It has
already been automatically controlled
Remote Controller – 6720891707 (2019/08) 9
How to use the buttons
2
1
MODE
FAN
TEMP
SLEEP FRESH
LE D FOLL OW M E
TU RBO SE LF C LEAN
ON/OFF
TIMER
ON
TIMER
OFF
SILENCE
FP
SWINGDIRECT
Fig. 10.
4.4 Timer operation
Press the TIMER ON button can set the auto-on time of the unit. Press
the TIMER OFF button can set the auto-off time of the unit.
To set the Auto-on time.
1. Press the TIMER ON button. The remote controller shows TIMER ON,
the last Auto-on setting time and the signal “H” will be shown on the
LCD display area. Now it is ready to reset the Auto-on time to START
the operation.
2. Push the TIMER ON button again to set desired Auto-on time.
Each time you press the button, the time increases by half an hour
between 0 and 10 hours and by one hour between 10 and 24 hours.
3. After setting the TIMER ON, there will be a one second delay before
the remote controller transmits the signal to the air conditioner.
Then, after approximately another 2 seconds, the signal “h” will
disappear and the set temperature will re-appear on the LCD display
window.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote controller shows TIMER
OFF, the last Auto-off setting time and the signal “H” will be shown
on the LCD display area. Now it is ready to reset the Auto-off time to
stop the operation.
2. Push the TIMER OFF button again to set desired Auto-off time.
Each time you press the button, the time increases by half an hour
between 0 and 10 hours and by one hour between 10 and 24 hours.
3. After setting the TIMER OFF, there will be a one second delay before
the remote controller transmits the signal to the air conditioner.
Then, after approximately another 2 seconds, the signal “H” will
disappear and the set temperature will re-appear on the LCD display
window.
CAUTION
fWhen you select the timer operation, the remote controller
automatically transmits the timer signal to the indoor unit for the
specified time. Therefore, keep the remote controller in a location
where it can transmit the signal to the indoor unit properly.
fThe effective operation time set by the remote controller for the timer
function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5,
3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5,
10, 11, 12, 13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.
10 Remote Controller – 6720891707 (2019/08)
Example of timer setting
5 Example of timer setting
Start
Off
Set 6 hours later
TIMER ON
(Auto-on Operation)
The TIMER ON feature is useful when you want the unit to turn on automatically before you return home.
The air conditioner will automatically start operating at the set time.
Example:
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting of starting operation time and the signal “H” will show
on the display area.
2. Press the TIMER ON button to display “6.0H” on the TIMER ON display of the remote controller.
3. Wait for 3 seconds and the digital display area will show the temperature again. The “TIMER ON”
indicator remains on and this function is activated.
Stop
On
Set 10 hours later
TIMER OFF
(Auto-off Operation)
The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed.
The air conditioner will stop automatically at the set time.
Example:
To stop the air conditioner in 10 hours.
1. Press the TIMER OFF button, the last setting of stopping operation time and the signal “H” will show
on the display area.
2. Press the TIMER OFF button to display “10H” on the TIMER OFF display of the remote controller.
3. Wait for 3 seconds and the digital display area will show the temperature again. The “TIMER OFF”
indicator remains on and this function is activated.
Stop
Start
On
Set 10 hours later
after setting
2 hours later
after setting
COMBINED TIMER
(Setting both ON and OFF timers simultaneously)
TIMER OFF → TIMER ON
(On → Stop → Start operation)
This feature is useful when you want to stop the air conditioner after you go to bed, and start it again in
the morning when you wake up or when you return home.
Example:
To stop the air conditioner 2 hours after setting and start it again 10 hours after setting.
1. Press the TIMER OFF button.
2. Press the TIMER OFF button again to display 2.0H on the TIMER OFF display.
3. Press the TIMER ON button.
4. Press the TIMER ON button again to display 10H on the TIMER ON display.
5. Wait for 3 seconds and the digital display area will show the temperature again. The “TIMER ON
OFF” indicator remains on and this function is activated.
Remote Controller – 6720891707 (2019/08) 11
Example of timer setting
Stop
Start
Off
Set 5 hours later
after setting
2 hours later
after setting
TIMER ON → TIMER OFF
(Off → Start → Stop operation)
This feature is useful when you want to start the air conditioner before you wake up and stop it after you
leave the house.
Example:
To start the air conditioner 2 hours after setting, and stop it 5 hours after setting.
1. Press the TIMER ON button.
2. Press the TIMER ON button again to display 2.0H on the TIMER ON display.
3. Press the TIMER OFF button.
4. Press the TIMER OFF button again to display 5.0H on the TIMER OFF display.
5. Wait for 3 seconds and the digital display area will show the temperature again. The “TIMER ON &
TIMER OFF” indicator remains on and this function is activated.
12 Remote Controller – 6720891707 (2019/08)
Handling the remote controller
6 Handling the remote controller
6.1 Location of the remote controller
•Use the remote controller within a distance of 8 meters from the
appliance, pointing it towards the receiver. Reception is confirmed
by a beep.
MODE
SWING T E MP
SHOR T CUT
FA N
SPE E D
TIMER
OFF
RE S E T LO CK
LED
FOLL OW ME
TIMER
ON
T UR B O
SEL F CL E A N
DIRE C T
SLE E P
FRE SH
8 m
Fig. 11.
CAUTION
fThe air conditioner will not operate if curtains, doors or other
materials block the signals from the remote controller to the indoor
unit.
fPrevent any liquid from falling into the remote controller. Do not
expose the remote controller to direct sunlight or heat.
fIf the infrared signal receiver on the indoor unit is exposed to direct
sunlight, the air conditioner may not function properly. Use curtains
to prevent the sunlight from falling on the receiver.
fIf other electrical appliances react to the remote controller, either
move these appliances or consult your local dealer.
fDo not drop the remote controller. Handle with care.
fDo not place heavy objects on the remote controller, or step on it.
6.2 Using the remote controller holder (optional)
•The remote controller can be attached to a wall or pillar by using
aremote controller holder (not supplied, purchased separately).
•Before installing the remote controller, check that the air condition-
er receives the signals properly.
•Install the remote controller with two screws.
•For installing or removing the remote controller, move it up or down
in the holder.
Fig. 12.
6.3 Replacing batteries
The following cases signify exhausted batteries. Replace old batteries
with new ones.
•Receiving beep is not emitted when a signal is transmitted.
•Indicator fades away.
The remote controller is powed by two dry batteries (AA batteries)
housed in the back rear part and protected by a cover.
1) Remove the cover in the rear part of the remote controller.
2) Remove the old batteries and insert the new batteries, placing the
(+) and (-) ends correctly.
3) Install the cover back on.
Fig. 13.
NOTICE:
When the batteries are removed, the remote controller erases all
programming. After inserting new batteries, the remote controller must
be reprogrammed.
CAUTION
fDo not mix old and new batteries or batteries of different types.
fDo not leave the batteries in the remote controller if they are not
going to be used for 2 or 3 months.
fDo not dispose batteries as unsorted municipal waste. Collection of
such waste separately for special treatment is necessary.
Bosch Thermotechnology Ltd
Cotswold Way
Warndon
Worcester
WR4 9SW
mailto: Commercial.enquiry@uk.bosch.com
Contact Number 03301233004
Web address www.bosch-industrial.co.uk
… 5 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch ARC R-3 IR - Air Conditioner Remote Controller bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch ARC R-3 IR - Air Conditioner Remote Controller in de taal/talen: Engels als bijlage per email.

De handleiding is 1.95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info