697454
26
Verklein
Vergroot
Pagina terug
1/170
Pagina verder
26 en | Installation AMAX panel
2019.08 | 11 | F.01U.309.277 Installation Manual Bosch Security Systems B.V.
5.4 System status indicator
The AMAX panel indicates the system status by using the LED status indicator on the system
main board.
Slow flash of red on status indicator (repeating on and off with an interval of one second)
indicates a normal system operation.
5.5 Certification
Prerequisites for certification conform installation
The AMAX panel is certified. To realize a usage of the system conformable to the certification
described in this chapter, the following prerequisites have to be fulfilled:
Use one of the following possibilities for devices:
Two supervised warning devices (PO-1 PO-2 & PO+) and one ATS 2 communicator
(onboard dialer, B426-M or D4020)
One self powered warning device and one ATS 2 communicator (onboard dialer,
B426-M or D4020)
Two communicators, one ATS 2 (onboard dialer, B426-M or D4020) and one ATS 1
(onboard dialer, B426-M or D4020)
One ATS 3 communicator (DX4020 or B426-M)
Connect all communicators to a central monitoring station.
Only use the onboard dialer and the option bus communicator for alarm transmission.
Connect one 12V / 7AH or one 12V / 18Ah battery to the system.
Ensure the maximum current for all components with a 7Ah Battery to be 550mA.
Ensure the maximum current for all components with a 18Ah Battery to be 1500mA
(standby 12h, recharge battery 80% in 72h) (PCB =l 00mA, IUI-AMAX Keypads = 31mA,
DX2010 = 35mA, DX3010 = 10mA, B426-M = 100mA, B450-M = 180mA, RF3227E = 30mA,
RFRC-OPT = 30mA).
Make sure to have an indication of the arm / disarm status accessible from outside the
monitored area (this indication has to be time limited).
Use one of the following methods for the access to the monitored area:
Starting the entry procedure by opening a door
Indicating the arm / disarm status
Preventing the access to the monitored area (e.g. mechanical door strike)
Only use the enclosure lock only in non EN setup.
Only use the telephone arming in non EN setup.
Only mount additional modules (except input module DX2010) inside the enclosure.
If one or more communicator modules are mounted in an extra enclosure, this enclosure
must have a tamper protection.
Install the tamper skirt on the PCB of the input module DX2010, if the input module
DX2010 is mounted on the external enclosure (AE20).
Program the system with the EN settings indicated on the programming sheet.
Remove the EN indication (on label) if the system is set without EN parameters.
Connect no more than 10 devices to one zone input (Panel, Keypad, Input Module, RFUN,
…)
For an EN50136-1, -2 SP4 compliant installation, select the transmission format "SIA
DC09 (2x ID)".
5.5.1 EN 50131-3 Grade 2, Environmental Class 2 - AMAX 2100 / 3000 / 3000
BE / 4000
Certification Body:
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch AMAX panel 4000 EN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch AMAX panel 4000 EN in de taal/talen: Engels als bijlage per email.

De handleiding is 2,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Snelstart handleiding - Nederlands - 76 pagina's

Bosch AMAX panel 4000 EN Installatiehandleiding - Nederlands - 190 pagina's

Bosch AMAX panel 4000 EN Snelstart handleiding - Deutsch - 76 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info