634123
13
Verklein
Vergroot
Pagina terug
1/71
Pagina verder
EURO • Printed in England • BA F016 L69 850 • ALM 34 • OSW
English - 3
If the fitted plug is not suitable for your socket out-
lets, it should be cut off and an appropriate plug fit-
ted in its place.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be inserted
into a 13 A socket elsewhere.
Position the handle bottom 6 at the rear of the
motor cover.
Line up the holes and secure with the pivot
pins 10 provided.
Attach the handle top 3 with the bolts and wing
nuts 8 to the handle bottom 6.
Note: Ensure that the cable clips supplied are used
to fix the cable to the handle.
Attach cable to cable restraint 5 ensuring that suffi-
cient cable slack is available. (see figure )
The handle can be set in three positions, as in
figure C:
I Park position
II Handle location for mowing
III Handle location to enable mower to be hung on
walls.
To move the handle from location I or III to mowing
location II press together the tubes of the handle
bottom 6.
Stop, release switch lever, wait until the
motor stops and remove the plug before
adjusting height. The blades continue to
rotate after the machine is switched off, a
rotating blade can cause injury.
Your machine has four settings which adjust the
height of cut between 10-32 mm (figure D):
For the first cutting of the season, a high cutting ad-
justment should be selected.
Changing height of cut is achieved by rearranging
the position of the spacers 14:
Place the handle in vertical position and turn the
mower on its side. Inspect the blade 13 and fan 15,
if blunt or damaged replace.
Hold the blade 13 using gardening gloves (not pro-
vided) use the spanner/scraper provided to remove
the blade nut 12, spacers 14 and blade 13.
Fit the blade 13, rearrange the spacers 14 to obtain
desired setting (figure D) and fit the blade nut 12.
Ensure that the blade 13 is the correct way up (so
that this symbol can be seen located as in
figure D) and tighten the blade nut 12 firmly.
Always fit the three spacers 14. Do not fit extra
spacers.
The blade continues to rotate for a few
seconds after the machine is switched off.
Allow the motor/blade to stop rotating be-
fore switching “on” again.
Do not rapidly switch off and on.
To aid starting tilt mower to side.
Starting:
Press and hold the safety button 2.
(Figure E)
Squeeze the switch lever 1 towards the han-
dle.
Release the safety button 2.
Stopping:
Release the switch lever 1.
The motor cover is designed with a flexible mounting
and tilts to improve directional control.
Place the lawnmower on the edge of the lawn, as
close to the power point as possible. Work away
from the power point as in figure F. Then at right an-
gles.
Position the cable to opposite side (already cut) at
the end of each turn.
When mowing do not allow the motor to la-
bour particularly in heavy conditions.
When the motor labours the speed of the motor
drops and you will hear a change in the motor
sound, when this occurs stop mowing, release
switch lever and raise the height of cut. Failure to
do so could damage the machine.
Assembly (see figure )
Handle Adjustment
Adjusting the Cutting Height
A
B
Starting and Stopping
Mowing
0
I
2
1
F016 L69 850.book Seite 3 Donnerstag, 17. Januar 2002 1:58 13
13 • F 016 L69 850 • TMS • 15.01.02
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch ALM 34 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch ALM 34 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info