97284
14
Verklein
Vergroot
Pagina terug
1/126
Pagina verder
14 | English 3 609 929 A78 8.8.06
c) Do not use a pneumatic tool if switch does
not turn it on or off. Any pneumatic tool that
cannot be controlled with the switch is danger-
ous and must be repaired.
d) Disconnect the air hose from the air source
before making any adjustments, changing
accessories, or storing the pneumatic tool.
Such preventive safety measures reduce the risk
of starting the pneumatic tool accidentally.
e) Store idle pneumatic tools out of the reach
of children and do not allow persons unfa-
miliar with the pneumatic tool or these
instructions to operate the pneumatic tool.
Pneumatic tools are dangerous in the hands of
untrained users.
f) Maintain pneumatic tools. Check for mis-
alignment or binding of moving parts,
breakage of parts, and any other condition
that may affect the operation of the pneu-
matic tool. If damaged, have the pneu-
matic tool repaired before use. Many
accidents are caused by poorly maintained
pneumatic tools.
g) Keep cutting tools sharp and clean. Prop-
erly maintained tools with sharp cutting edges
are less likely to bind and are easier to control.
h) Use the pneumatic tool, accessories, and
tool bits, etc., in accordance with these
instructions and in the manner intended
for the particular type of pneumatic tool,
taking into account the working conditions
and the work to be performed. Use of the
pneumatic tool for operations different from
those intended could result in a hazardous situ-
ation.
5) Service
a) Have your pneumatic tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the pneumatic tool is maintained.
Specific Safety Rules
Avoid contact with a live wire. The
pneumatic tool is not insulated and con-
tact with a live wire results in electric shock.
f Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance. Contact
with electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Pene-
trating a water line causes property damage or may
cause an electric shock.
f Disconnect all fuses or circuit breakers that
feed the work area before you drill, cut, or
attach anything in this area. This eliminates the
danger of electric shock.
f Use only flawless tool bits that are not worn.
Defective tool bits can break, for example, and
cause injury or damage.
f When you install the tool bit, take care that
the tool bit is seated securely on the tool bit
holder. If the tool bit is not joined securely to the
tool bit holder, it may become loose and it may no
longer be controllable.
f Place the tool bit onto the nut/screw only
when the screwdriver is switched off. Rotating
tool bits can slide off the nut/screw.
f Be careful when long screws are screwed in.
Depending on the type of screw and the tool
bit used, there is a danger of slipping. Long
screws are often difficult to control and the danger
exists that the tool bit may slip off the fastener head
and cause injury.
f Support the nutrunner with, for example, a
reaction bar when you are working at high
torque. Work at high torques may result in damag-
ing reaction torques, which can be reduced by
using a support device.
f Be careful in confined work spaces. Keep your
hands away from the reaction bar. Reaction
torques may result in injuries due to pinching or
crushing.
DANGER
OBJ_BUCH-220-001.book Page 14 Tuesday, August 8, 2006 9:41 AM
14

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bosch-0-607-452-603

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch 0 607 452 603 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch 0 607 452 603 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 13,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info