731628
40
Verklein
Vergroot
Pagina terug
1/63
Pagina verder
18
5.9 Burners
It is normal for rust (oxidation) to form around the burners. Food remnants must be removed
regularly. This can be done by means of a barbecue cleaning brush. Burners must periodically be
removed for inspection and cleaning, in particular after a period of non-use/storage. The burners
must be checked for their general condition and to ensure that the openings are not blocked. The
burners can be cleaned with the use of a brush. When removing the burners, make sure that you do
not damage the gas valve and the ignition electrode.
An opening has been placed intentionally in the first part of the burner to ensure that enough oxygen
can be supplied to form a flammable mixture. This means you will see a small opening, just where
the gas valve connects to the burner. No gas will leak from this.
5.10 Spiders and insects
Spiders and insects can make their nest inside the burners of the barbecue, which may cause gas to
flow from the front of the burner. This is a dangerous situation that can cause a fire behind the
operation panel. This will damage the barbecue, which will then no longer be safe to use. Therefore,
we recommend that you check the barbecue at least once a year for spiders, insects and nests
(particularly after long storage periods). You can do this by dismantling the burner tubes and blowing
through them or brushing them clean.
5.7 Ventilation
The burners can only function properly if the heat they produce can escape as well. If this is not
possible, then the burners may not get enough oxygen, which may cause backfiring, especially if the
urers are set to HIGH. If this happes regularly, it ay ause the urers to deelop raks. For
this reason, there are ventilation openings around the barbecue. These allow the hot air to escape.
Always ensure that there is sufficient space around the cooking area (the racks will allow sufficient
space). Never cover the ventilation openings with aluminium foil or other materials that can impede
the airflow. NEVER allow the cooking surface to be completely covered, for instance by a large pan or
by completely filling it with grill trays.
5.8 Replacing the gas hose
The gas hose should be replaced every two years. Rubber gas hoses can dry out which may result in
gas leaks.
5.6 Enamel parts
Some of the parts on the barbecue have an enamel coating. Enamel is a glass-based product and is
very durable and resistant to wear. However, it is not resistant to shocks and knocks, which may
cause hairline cracks. The hairline cracks can lead to small pieces of enamel breaking off, which leads
to rust forming. The performance of your barbecue will not be affected by the broken off pieces or
hairline cracks. No claims can be made regarding damages to the enamel in the cooking area after
use.
40

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Boretti IBRIDO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Boretti IBRIDO in de taal/talen: Nederlands, Engels, Frans als bijlage per email.

De handleiding is 3,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info