731628
35
Verklein
Vergroot
Pagina terug
1/63
Pagina verder
13
4 Use of your barbecue
4.1 General information
Even though all gas connections on the
barbecue are tested for leakages before
transport, a complete test must be carried
out at the assembly site. During transport or
assembly, parts of the barbecue may have
been moved. It is also possible that the gas
pressure on the equipment is too high.
Regularly inspect the entire system for leaks
and check the system immediately in the
event that you smell gas.
4.2 Gas leak test
Always carry out a gas leak test before use of the barbecue and when the barbecue has not been
used for some time.
Extinguish any open fires (DO NOT SMOKE when testing for leaks).
Never carry out this gas leak test near open flames.
Make a soapy solution made up from equal parts of water and liquid soap or gentle washing-
up liquid
Follow the steps below:
1. Turn the control knobs of the burners to off.
2. Remove the battery from the electronic ignition.
3. Open the gas bottle.
4. Apply the soapy solution to all connections of the gas supply. If no soap bubbles are
formed, there is no gas leak. If soap bubbles start to form on a connection, this indicates
a leak. In the event that you detect a leak, turn the gas supply off immediately, tighten
the leaking connections firmly, open the gas bottle again and repeat steps 1 through to 4.
5. Turn the gas supply off.
6. Turn the control knobs of the burners on for 10 seconds to let the pressure escape from
the hose and then turn the control knobs to off again.
7. Remove the soapy solution from the connections of the equipment with cold water and
rub dry with a cloth. Check all gas supply connections before every use and do the same
when the gas bottle is being connected to the gas pressure regulator.
It is recommended that you check the gas hose for leaks every year, even if the gas
bottle has never been disconnected from the equipment.
Note: Ensure that you test all loose connections (including the side burner) and, if required,
tighten them again when you are testing the equipment for leaks. Even a small leak in the
system can result in a dangerous situation.
Note: These days, most gas bottles are fitted with a mechanism that detects leaks inside the
container. When the gas is being released too quickly, this mechanism cuts off the gas
supply. A leak can severely restrict the gas supply which will make it difficult to light the
barbecue.
Note: If you are unable to close off a gas leak, then turn off the gas supply and contact your
sales outlet. Even a small leak can cause a fire.
Note: If, after several attempts, you are unable to light the barbecue, then contact your sales
outlet.
Note: Esure that the otrol kos are i the OFF positio he you are ot usig the
equipment.
Gasbottle 10 kg
Max 560mm
Max 304mm
Gasbottle 5-6 kg
Max 470mm
Max 300mm
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Boretti IBRIDO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Boretti IBRIDO in de taal/talen: Nederlands, Engels, Frans als bijlage per email.

De handleiding is 3,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info