714402
26
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
EN
26
Installation
www.bora.com
6.4 Assembly instructions
6.4.1 Required clearance distances
Observe the required clearance distances.
1
3
2
Fig. 6.3 required clearance distances
[1] Minimum clearance of 50 mm between the worktop cut-out
and the rear edge of the worktop.
[2] Minimum clearance of 300 mm from the left and right of the
worktop cut-out to the adjacent cabinet or wall.
[3] Minimum clearance of 600 mm between the worktop
and the wall unit. A minimum clearance of 1000 mm is
recommended for ergonomic reasons.
6.4.2 General kitchen unit specifications
Cross bars on the kitchen unit in the area of the
worktop cut-out may need to be removed.
In the case of thin worktops, there must be a
sufficiently rigid support plate on the unit.
No false floor is necessary below the cooktop. If cable
protection (false floor) is planned, the following must
be taken into account:
It must be fitted in such a way that it can be
removed for maintenance work.
To ensure sufficient cooktop ventilation, a minimum
distance of 15 mm to the bottom edge of the
cooktop is to be observed.
The drawers and/or shelves in the floor unit must be
removable.
For correct installation, the slide-in units of the
base cabinet must be shortened depending on the
installation situation.
6.1.2 Home In module PUHIM (optional)
Via this additional interface it is possible to establish a
connection to other systems and, for example, a window
contact switch or low pressure warning device can be
connected. The module is to be integrated in the cooktop.
INFO The BORA Pure Home In module PUHIM is
available as an accessory (including installation
instructions).
INFO The BORA window contact switch UFKS is
available as an accessory (including installation
instructions).
6.2 Scope of delivery
Scope of delivery: PUXA, PUXU, PURA, PURU Quantity
Cooktop with integrated cooktop extractor 1
Air inlet nozzle 1
Stainless steel grease filter 1
Operating and installation instructions 1
Installation clamps 4
Sealing tape 1
Height adjustment plate set 1
Glass ceramic scraper 1
Bag containing various small parts for assembly 1
Additional scope of delivery: PURU, PUXU
Activated charcoal filter 1
Template for back wall cut-out 1
Tab. 6.1 Scope of delivery
6.2.1 Checking the scope of delivery
Make sure the delivery is complete and check it for
damage.
If there are any missing or damaged parts, please
notify BORA After Sales Service immediately.
Do not under any circumstances install parts which are
damaged.
Dispose of transport packaging in the proper manner
(see the Decommissioning, disassembly and disposal
section).
6.3 Tool and aids
The following special tools are required to correctly install
the cooktop:
Compass saw or hand saw
Drilling template for cut-out on rear wall PURU
(included in scope of delivery)
Torx 20 screwdriver
Black, heat-resistant silicone sealant
26

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bora-X-Pure

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bora X Pure bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bora X Pure in de taal/talen: Frans als bijlage per email.

De handleiding is 12,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bora X Pure

Bora X Pure Gebruiksaanwijzing en installatiehandleiding - Nederlands - 82 pagina's

Bora X Pure Gebruiksaanwijzing - Nederlands - 64 pagina's

Bora X Pure Gebruiksaanwijzing - Deutsch - 60 pagina's

Bora X Pure Gebruiksaanwijzing - English - 60 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info