714526
33
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
EN
33
Operation
www.bora.com
7 Operation
Observe all safety and warning information during
operation (see the Safety chapter).
INFO Only operate the cooktop if the stainless steel
grease filter and the air inlet nozzle have been
installed.
7.1 General operating instructions
The cooktop or cooktop extractor is operated using the
operating panel.
The selection of the cooking zone is performed by the
direct selection of the assigned sensor button on the
operating panel.
There are 9 power levels and one power setting available
for each cooking zone and the cooktop extractor.
The selection on the setting ring is performed by
direct selection or by uniformly swiping clockwise or
anti-clockwise.
0
3
1
6
9
P
Fig. 7.1 Setting ring with power level positions
7.2 Operating the cooktop
Switching on
INFO If the display shows
0
and no other input is made,
the device will switch off automatically after 20
seconds.
Press the on/off switch to switch on the device.
The power level
0
is shown on the display.
Switching off
INFO Use the operating panel to switch off the cooking
zone after use. Do not rely on the pan size
recognition.
Press the on/off switch to switch off the device.
Pay attention to the residual heat display
(see the Device Description chapter).
7.2.1 Select cooking zone
Press the cooking zone button for the desired cooking
zone.
The
0
in the cooking zone indicator lights up more
brightly.
7.2.2 Adjusting the power level
Press the desired power level or
Press and uniformly swipe round the setting ring until
the desired power level is reached.
7.2.3 Changing the power level
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Select the desired power level.
7.2.4 Selecting the power setting
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Select power setting
P
.
The power setting
P
is displayed in the cooking zone
indicator.
If one cooking zone is operated with the
P
power setting,
then the operation of the second cooking zone on this
side is possible at a maximum of power level
5
.
If power level
5
is increased, the
P
power setting is
switched off.
7.2.5 Switching the power setting off early
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Select another power level.
The current power level is displayed in the cooking
zone indicator and the power setting is deselected.
7.2.6 Switching off the cooking zone
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Press the power level position
0
.
0
will appear on the display for a few seconds, then the
display will turn off.
7.2.7 Pay attention to the residual heat
display
After switching it off, the cooking zone remains hot.
H
is
displayed in the cooking zone indicator (residual heat
display). The cooking zone indicator will go out after
sufficient cooling time (temperature < 60°C).
INFO While
H
is displayed in the cooking zone indicator
(residual heat display), do not touch the cooking
zone or place any heat-sensitive objects on top of
it. Risk of burns and fire!
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bora BFIAS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bora BFIAS in de taal/talen: Engels als bijlage per email.

De handleiding is 5,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bora BFIAS

Bora BFIAS Gebruiksaanwijzing - Nederlands - 52 pagina's

Bora BFIAS Gebruiksaanwijzing - Deutsch - 52 pagina's

Bora BFIAS Gebruiksaanwijzing - Français - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info