476987
15
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
15
MULTI-FUNCTION ELECTRIC OVEN
With different heating elements controlled using a selector switch
and regulated by a thermostat, this oven offers various cooking
methods. There are three principle sources of heat:
a) Forced heat diffusion (fan oven)
b) Spontaneous heat diffusion (static oven)
c) Infra-red rays (grill)
Starting from the position 0 (off) the selector knob can be turned
clockwise to the following positions:
- symbol or : oven light and red warning light on, operation
of fan.
- symbol or : conventional "static" oven cooking, the oven
temperature is controlled using the thermostat knob.
- symbol
or : cooking with fan oven, on one or two levels,
the oven temperature is controlled using the thermostat knob.
- symbol or : grill on (on oven top element), the thermostat
knob must be set at the maximum temperature.
- symbol
or : infra-red cooking with fast grill, advised for
long grilling: the thermostat knob must be set at the maximum
temperature.
- symbol or : quick cooking using the fan oven, the oven
temperature is controlled using the thermostat knob.
- symbol
or : slow cooking using fan oven, the oven
temperature is controlled using the thermostat knob.
In all positions except zero (0) the red warning light and the
oven light are on.
NOTE: The yellow warning light comes on according to
thermostat variations. Before putting food in to be cooked, the
oven should be pre-heated for at least 10 minutes.
- The oven shelf is designed to take normal oven dishes for
cooking sweets or roasts, or is used without a pan for cooking
foods under the grill.
- The drip tray is only there to collect any juice from foods and must
never be used as a cooking surface.
- Remember that cooking times may vary if food is cooked on two
shelves at the same time.
HOW TO USE THE ROTISSERIE
- fit the control knob guard as shown in figure 13.
- ignite the grill burner, or switch on the grill element;
- impale the meat for cooking on the spit and fix it in the centre
of the two forks;
- insert the end of the spit into the motor drive socket;
- remove the handle from the spit;
- place the drip tray on the bottom runner of the oven;
- gently close the oven door, resting it against the knob guard;
- start the rotisserie motor by pressing the switch on the symbol.
- baste the meat from time to time. When cooked, screw the
handle onto the spit and remove from the motor drive socket.
OVENS WITH THERMOSTAT
If cooking temperatures are not as set, call in an engineer to
check the thermostat.
HOW TO USE THE MINUTE MINDER
Set the cooking time considered necessary by turning the timer
knob clockwise. An alarm will sound at the end of the preset
time.
USE OF DIGITAL-CLOCK END OF COOKING TIMER (fig. 14)
The timer allows the cooking time in the oven to be set. If food
does not need to bewatched, the timer can be used even when
the user is absent.
Operation:
- Synchronize the digital clock (in case it is not already set due
to temporary power-cuts or other reasons) pressing and turn-
ing knob A in a clock-wise direction.
- Put food in the oven.
GB
For the user
- Programme in the cooking time on dial D turning without
pressing knob A towards the right (max. time - 210 mins).
-Turn the thermostat knob to the desired temperature and the
selector switch to the chosen cooking method.
- When cooking is finished the buzzer will sound and the oven
will automatically go off; turn off the buzzer by moving the sym-
bol
to the middle of the dial D using the knob A (turning
without pressing towards the right).
-Move the thermostat and selector switch to zero.
N.B.: For manual oven use (without the aid of the timer), set the
symbol to the dial D, otherwise the oven will not be operated
manually.
USE OF SINGLE-CONTROL END OF COOKING TIMER (WITHOUT
CLOCK) (fig. 15)
This allows the cooking time to be programmed.
Operation:
-Move the knob to the desired cooking time (120 mins max. for
the electric oven; 100 mins max. for the gas oven).
- Choose the temperature using the thermostat knob and move
the selector knob to the required cooking method.
- When the programming knob is at the 0 position the oven will
switch itself off. This is automatic.
-Move the thermostat knob back to symbol
.
-Move the selector knob to symbol 0.
N.B. If the timer is not used, the oven programming knob is to
be set to the manual position .
USE OF THE ELECTRONIC TIMER (fig. 16)
This allows the start time and cooking duration time to be
programmed.
If food does not need to be watched, this timer can be selected
even when the user is absent. Soon after installation and at any
electrical supply cut-outs the display flashes; the clock must
then be synchronized again to allow programming.
SETTING THE TIMER TO THE CURRENT TIME
- The current time is set by pressing the 2 buttons (COOKING TIME
and STOP) and the "+" or "-" button at the same time. Any pre-
vious programmes are cancelled and the AUTO symbol flashes.
NOTE: when the AUTO symbol is flashing the oven cannot be
used manually.
"+" AND "-" BUTTONS
- Pressing the "+" or "- "buttons makes time go up or down at
variable speed according to how long the button is pressed for.
MANUAL USE
- Press the MANUAL button: the AUTO symbol goes out (if flashing
or permanently on) the SAUCEPAN symbol lights up and the oven
can be used by adjusting the thermostat knob and the selector
switch according to the instructions given in the manual.
AUTOMATIC OPERATION WITH END OF COOKING AND
DURATION TIMERS
- Let’s use an example: it is 9:25 am; you want the oven to switch
on at 11 am and switch off at 12 pm (cooking time 1 hour).
- Press the COOKING DURATION button and within 5 seconds press
"+" button until it shows 01.00, adjust using "-" button if neces-
sary. The AUTO and PAN symbols come on permanently.
- Press the END OF COOKING button and within 5 seconds press
"+" button until it shows 12.00. The PAN symbol goes out but
the AUTO symbol remains permanently on.
-Move the oven thermostat knob to the desired temperature,
and the selector switch to the required cooking method; the
red warning light comes on the oven light comes on and the
timer is ready to start: at 11am the oven will come on
automatically and the PAN symbol will light up.
- When cooking is over (12 am) the AUTO symbol flashes, the
PAN symbol goes out and a buzzer sounds; to turn off the buzzer
press any button.
-Move the thermostat and selector knob to the OFF position.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bompani BO613 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bompani BO613 in de taal/talen: Nederlands, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 1,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info