552029
11
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
11
09/2013
Note:
‘ ’ is for Standard Cotton programme.
Standard Cotton at 60 °C and 40 °C are suitable to clean normally soiled cotton laundry and they are
the most efficient programs in terms of combined energy and water consumptions for washing that
type of cotton laundry; in addition, the actual water temperature may differ from the declared cycle
temperature.
NOTE: At the end of a wash cycle the knob must be turned to the position ‘Off’.
ATTENTION: For your safety, please not turn the knob to the position ‘Aus’ (Off) and get clothes
while the machine is running. Because the temperature of water may be high and it may scald you.
The door lock will open automatically at the end of a wash cycle while the temperature of the drum
is cool down.
2. Temperature regulating knob
This knob allows for the adjustment of the temperature.
Rotate this switch and select a required wash temperature: -30 -40 -50 -60 -70 -80 -90°C.
If no temperature is selected the washing temperature is cold.
3. Spin regulation
This button is used to adjustment the spin speed. To change setting, press the corresponding key
repeatedly until the desired value is shown on the digit display. In section 000 no spin, the machine
does not spinning. Please note, the section of spin speed is not available for each programme.
4. Extra Rinse and Rinse hold
This button allows for the select extra rinse or rinse hold function. Upon each press of the button
the LED indicator changes state; there are three possible combinations which are:
LED on Extra rinse
LED blinking Rinse hold
LED off No option is selected
Please note the option is not available in each washing programme.
Rinse hold
The anti-crease function, when activated the washing machine stops with water in the tank without
having to drain and spin. To run the drain and spin, the Start/Pause button at the corresponding
blinking LED must be pressed.
Note: To remove creases completely, it is need to iron your clothes.
5. Pre-wash and Soak
This key allows for the selection of pre-wash or soaks function. Upon each press of the button the
LED indicator changes state There three possible combinations which are:
LED on Pre-wash
LED blinking Soak
LED off No option is selected
Please note the option is not available in each washing programme.
Pre-Wash
The pre-wash function is used to make a low temperature washing for large dirty particles before
the main wash cycle to remove stains.
Soak
The soak function is used to soak strongly dirt clothes before main wash cycle.
6. Start/Pause
Press this button to start or pause the machine. The LED of ‘Start/Pause’ blinking when the ma-
chine is in Standby mode or pauses, and it is lighted when running.
7. Delayed start and child safety lock
This button, when selecting a washing programme, it allows for the adjustment of the delay start
function; while after starting the wash cycle it allows for the activation of the child safety locking fea-
ture.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bomann WA 5814 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bomann WA 5814 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bomann WA 5814

Bomann WA 5814 Gebruiksaanwijzing - Deutsch - 22 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info