814761
15
Verklein
Vergroot
Pagina terug
1/74
Pagina verder
NM6063CB_IM 19.04.23
15
6. At the end of the seam, the needle must be in the upper
position to allow the thread to be pulled out easily.
7. Lift the presser foot to remove the fabric.
8. To cut the threads, you can pass them over the thread
cutter (12). Or use a pair of scissors.
Buttonholes
1. Place the fabric under the presser
foot (20).
2. Lower the presser foot where you
want to sew the buttonhole.
3. Then select stitch pattern 8 with the
adjusting wheel (3).
4. Sew 5 6 stitches with low speed
(L).
5. Select stitch pattern 7 with the
adjusting wheel (3).
6. Sew on the fabric at a suitable
length. Make sure the stitch is
sewn in a straight line.
7. Select stitch pattern 8 with the
adjusting wheel (3).
8. Sew 5 6 stitches with low speed
(L).
9. Lift the presser foot (20) and turn
the fabric 180 °.
10. Select stitch pattern 7 with the
adjusting wheel (3).
11. Sew until the buttonhole is com-
pletely sewn.
End Operation
1. Switch off the appliance by sliding the switch (8) to the
OFF position.
2. Switch off the light with the switch (11).
3. Unplug the power supply unit (26) from the socket.
4. Disconnect the foot pedal (25) and power supply unit
(26) from the sewing machine.
Cleaning
WARNING:
Switch off the appliance before cleaning. Unplug the
power supply unit from the socket.
Never immerse the sewing machine, the foot pedal
or the power supply unit in water for cleaning! It could
cause an electric shock or re.
CAUTION:
Do not use a wire brush or other abrasive objects.
Do not use any sharp or abrasive cleaning agents.
Use only a moderately damp cloth to clean the outside of
the housing. If necessary, use a little hand dishwashing
detergent. Then dry the housing with a soft cloth.
Clean the area underneath the bobbin cover with a dry
brush.
Storage
We recommend storing the appliance in its original
packaging if you do not intend to use it for a long period
of time.
Always store the appliance out of the reach of children in
a well-ventilated and dry place.
Troubleshooting
Problem Possible Cause Remedy
The upper-thread
breaks.
The upper-thread is not threaded correctly
in the sewing machine.
Re-thread the upper-thread.
The thread tension is too tight. Loosen the thread tension (lower number).
The thread is too thick for the needle. Select a larger needle.
The needle is not inserted correctly. Remove the needle and reinsert it. (Flat side of the
needle points to the back.)
The needle is damaged. Replace the needle.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bomann NM 6063 CB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bomann NM 6063 CB in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 3.58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info