26
After the time has elapsed the device will turn off and 5 signal tones
will sound. Take the food from the device.
Note:
The auto functions and the convection mode with pre-heating
may not be used for gradual cooking.
Special functions
Auto start
You may delay the start of microwave, grill, convection, auto
functions or even of a combi setting. The maximum time-delay is
23 hours and 59 minutes.
Note:
First set the clock! Otherwise you may not use this function. ►
When using auto start, the defrost function is not available. ►
Example: Proceed as follows for automatically starting the micro-
wave:
1. Press the MICROWAVE button once/repeatedly to select the
desired microwave power setting.
2. Press the START/+30SEC./CONFIRM button to conrm your
settings.
3. Use the turning knob to set the desired cooking time.
4. Press the CLOCK/PRE-SET button. A signal tone sounds and
the display will show the current time, with the rst digit ashing.
5. Use the turning knob to set the hour of the desired start time.
6. Press the CLOCK/PRE-SET button. A signal tone sounds and
the minutes will be ashing on the display.
7. Use the turning knob to set the minutes of the desired start time.
Example: 7:30 minutes cooking time at 100% power;
start time 14:20 o’clock
Step Button Display
1 MICROWAVE P100
(Choose the
performance settings)
2
START/+30SEC./
CONFIRM
(Conrm)
3 7:30 (Cooking time)
4 CLOCK/PRE-SET 10:45 (Current time)
5 14:45 (Set hour)
6 CLOCK/PRE-SET 14:45
7 14:20 (Set minutes)
8
START/+30SEC./
CONFIRM
10:45 (Current time)
Note:
During this programmed setting the functions of the controls ►
are blocked (except: CLOCK/PRE-SET and STOP/CLEAR).
If you wish to display the start time again, press the CLOCK/ ►
PRE-SET button.
When the pre-set time has been reached, the microwave will ►
start operation. Two signal tones will indicate the start.
Warning: Risk of re!
Always supervise the device during operation. ►
When using the time-delay function, set the time in such a ►
way that the device will be operating under proper supervi-
sion.
Do not operate the microwave empty. ►
If you take the food earlier from the device, you will have to ►
terminate the function by pressing the STOP/CLEAR button.
After the time has elapsed the device will turn off and 5 signal tones
will sound. Take the food from the device.
Locking (Child-proof lock)
Press and hold the STOP/CLEAR button for more than 3 seconds
to lock the device. The display will show the locked setting. The
functions of the controls are blocked. Press and hold the
STOP/CLEAR button again for more than 3 seconds to unlock.
Display function
• During microwaving, grilling, combined or hot air operation (with-
out preheating) you can press the MICROWAVE, GRILL/COMBI
or CONVECTION button for 2-3 seconds in order to show the
current mode or temperature level.
• In disregard to the operation mode, the display will be showing
the current time for 2-3 seconds when pressing the CLOCK/
PRE-SET button.
• During time-delay mode, press the CLOCK/PRE-SET button to
display the start time.
Cleaning
Turn the microwave off and remove the mains plug.
Interior
• Keep the interior of the oven clean. Splashes and over owin
liquids on the walls of the oven can be removed with a damp
cloth. If the oven is very dirty a mild detergent can also be used.
Please do not use any abrasive detergents.
• Wipe off the viewing window on the inside and outside with a
damp cloth and remove splashes and stains from over owing
liquids regularly.
External Walls
• The external walls of the microwave should only be cleaned with
a damp cloth. Please ensure that no water enters the openings
in the housing and therefore inside the device.
• The switches should also only be cleaned with a damp cloth. In
order to clean the function switch, rst open the microwave door
to avoid switching on the device so accidentally.
