814437
27
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
HM6054CB_IM 16.06.21
27
Overview of the Components /
Scope of Delivery
1 Release button
2 5-stage speed switch
3 TURBO button
4 Mains lead
5 Housing
6 Beaters
7 Ring marking
8 Dough hooks
Notes for Use
For best results, use high-quality containers that are not
too big.
In order to avoid splashing, always submerge the dough
hooks or beaters fully into the food to be mixed before
switching on the appliance.
Short-term operation: Do not operate the mixer for
more than 3 minutes. Then let it cool down for approxi-
mately 10 minutes before using it again.
The appliance is suitable for small quantities only! Fill
containers with the maximum quantities only as indicated
in the table!
Assembly of Accessories
NOTE:
The dough hook with the ring marking on its shaft must
only be attached to the right (larger) tting of the mixer.
The other dough hook is intended for the left tting.
It does not matter which beater is inserted into which
opening.
1. Make sure the switch is at the “0” position and the appli-
ance disconnected from the mains.
2. Press the ends of the dough hooks or the beaters into
the openings provided in the mixer until they snap into
place. Slightly turning the accessories might help facili-
tate the process of attaching.
Releasing the Dough Hooks / Beaters
Press the release button to release the accessories.
NOTE:
The accessory can only be ejected when the speed
switch is in the “0” position.
Electric Connection
1. Make sure the switch is at the “0” position.
2. Before you plug the mains plug into the outlet, check
whether the system voltage that you want to use,
matches the one of the appliance. You will nd informa-
tion about it on the type plate.
3. Connect the appliance to a correctly installed grounded
outlet.
Turning On / Off
In order to switch on the appliance, set the switch to one
of the positions from “1” to “5”.
When at the “0” position, the appliance is switched off.
Speed Settings
Switch position 1 = lowest speed setting
Switch position 5 = highest speed setting (TURBO)
All speed settings allow you to temporarily switch to the
highest speed setting. In order to do so, press the TURBO
button during operation.
Please choose the accessories and speed setting according
to the table below:
Table
Product / method of preparation Max. quantity Accessories Speed setting Max. operating time
Heavy dough (e. g. yeast dough) 500 g Dough hooks 1 – 4 3 minutes
Cake batter or light crêpes mixture 750 g Beaters 2 – 5 (or TURBO) 3 minutes
Sponge mixture, wafe mixture, cream 750 g Beaters 2 – 5 (or TURBO) 3 minutes
Operation
1. Place the container with the ingredients on a at surface.
2. Make sure the switch is at the “0” position and the appli-
ance disconnected from the mains.
3. Attach all accessories.
4. Connect the appliance to a properly installed earthed
socket.
5. Insert the dough hooks or beaters into the food to be
mixed. Set the desired speed with the speed switch.
Begin at a low speed (level 1 2) and then increase this
if necessary.
6. Tilt the appliance slightly up and down.
7. Always turn the appliance off before removing it from
the vessel.
Ending Operation
1. Set the switch to “0” position and wait until the motor has
come to a complete stop.
2. Disconnect the plug from the outlet.
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bomann HM 6054 CB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bomann HM 6054 CB in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 1.79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info