4
Special safety Information for this Unit
Special safety Information for this UnitSpecial safety Information for this Unit
Special safety Information for this Unit
• The maximum number of place settings to be washed is 10.
• This unit is intended to be used in household and similar applications such as
- staff kitchen areas in shops, offices and other working environments;
- by clients in hotels, motels and other residential type environments;
- in farm houses.
• The appliance is to be connected to the water mains using new hose sets and that
old hose-sets should not be reused.
• The maximum permissible inlet water pressure is 1 Mpa.
• The minimum permissible inlet water pressure is 0.04 Mpa.
• In the appliance bottom are located ventilation openings (depending on model).
These may not be clogged e.g. by carpet.
• Pay attention to a proper loading of the appliance. Follow the instructions in the
chapter “Loading the Dishwasher Baskets”.
• Knives and other utensils with sharp points must be loaded with their points down
in the cutlery basket (depending on model) or placed in a horizontal position in the
dishwasher basket.
• The door should not be left open, since this could increase the risk of tripping.
• This appliance can be used by children
childrenchildren
children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
use of use of
use of
the appliance
the appliancethe appliance
the appliance in a safe way and understand the hazards involved.
• Children
ChildrenChildren
Children who are younger than 8 years must be kept away from the device.
• Children
ChildrenChildren
Children shall not play with the appliance.
• Cleaning and use
useuse
user maintenance
r maintenancer maintenance
r maintenance shall not be made by children,
children,children,
children, unless they are
older than 8 years and are supervised.
• Do not try to repair the appliance on your own. Always contact an authorized
technician. If the supply cord is damaged, it must be replaced by the manufactur-
er, its service agent or similarly qualified persons in order to avoid a hazard.
