688073
7
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
Dimensions in mm
Preparing the worktop for
Preparing the worktop for Preparing the worktop for
Preparing the worktop for
installation of the hob
installation of the hobinstallation of the hob
installation of the hob
CAUTION:
CAUTION:CAUTION:
CAUTION:
Before cutting secure the outer
cutout
adhesive tape to avoid traces of jigsaw on the
top.
The worktop must be leveled horizontally
sealed on the wall side against overflowing liquids
or moisture.
The hob must be
completely surrounded by min.
50 mm work surface.
The cut surfaces (cutout edges) must be sealed
with special varnish, silicone rubber
in order to prevent swelling caused by humidity.
Clean and dry the worktop in the cutout area
thoroughly.
Worktop cutout
Worktop cutoutWorktop cutout
Worktop cutout
Prepare the cutout of the worktop
according to the
dimensional drawing.
Dimensions in mm
Installing the hob
Installing the hobInstalling the hob
Installing the hob
NOTE
NOTENOTE
NOTE:
::
:
To avoid damage, place the hob with the top of the
cooking surface on a padded base.
First check the factory fitted hob seal at the hob
frame to the integrity and the proper
7
installation of the hob
installation of the hobinstallation of the hob
installation of the hob
cutout
edge with wide
adhesive tape to avoid traces of jigsaw on the
work-
The worktop must be leveled horizontally
and be
sealed on the wall side against overflowing liquids
completely surrounded by min.
The cut surfaces (cutout edges) must be sealed
with special varnish, silicone rubber
or cast raisin
in order to prevent swelling caused by humidity.
Clean and dry the worktop in the cutout area
according to the
To avoid damage, place the hob with the top of the
First check the factory fitted hob seal at the hob
frame to the integrity and the proper
fit.
Attach the enclosed retaining clamps with the
screws in the provided holes
Place
the hob according to the hob
"Appliance
Overview" and with the connecting c
ble first centrally into the
prepared cutout of the
worktop.
Make sure that the distances to the cutting are
equal on all four sides and
on the worktop.
Installing the oven
Installing the ovenInstalling the oven
Installing the oven
Put the appliance
with the connecting cable f
into the prepared cabinet a bit
Do the connection
to the hob
mains, see "Electrical connection".
Insert the oven into the
cabinet opening
ly
. Make sure that the cable
(bent, squeezed or twisted)
Attach and secure the oven
screws on the side walls of the cabi
The provided mounting holes
(A)
are visible after opening
the
oven door on the left and
right frame
Electrical connection
Electrical connectionElectrical connection
Electrical connection
Information for the
Information for the Information for the
Information for the
authorized expert
authorized expertauthorized expert
authorized expert
WARNING:
WARNING:WARNING:
WARNING:
The installation to the mains supply must conform
to the local standards and regulations.
Connecting the appliance to a domestic power
socket
or using multiple sockets or extension c
bles is not permitted.
Improper connection may cause to an
shock
shockshock
shock!
Before connecting, ensure that the power supply
corresponds with the information on the rating
bel (door frame)
and the wiring
Attach the enclosed retaining clamps with the
screws in the provided holes
laterally of the hob.
the hob according to the hob
drawing under
Overview" and with the connecting c
a-
prepared cutout of the
Make sure that the distances to the cutting are
equal on all four sides and
that the seal is resting
with the connecting cable f
irst
into the prepared cabinet a bit
.
to the hob
as well as to the
mains, see "Electrical connection".
cabinet opening
complete-
. Make sure that the cable
s does not restricted
(bent, squeezed or twisted)
.
Attach and secure the oven
by using the supplied
screws on the side walls of the cabi
net.
The provided mounting holes
are visible after opening
oven door on the left and
right frame
authorized expert
authorized expertauthorized expert
authorized expert
The installation to the mains supply must conform
to the local standards and regulations.
Connecting the appliance to a domestic power
or using multiple sockets or extension c
a-
Improper connection may cause to an
electric
electric electric
electric
Before connecting, ensure that the power supply
corresponds with the information on the rating
la-
diagram.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bomann EHBC 562 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bomann EHBC 562 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bomann EHBC 562

Bomann EHBC 562 Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info