652039
20
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
20
Install the power cord so that the appli-
ance can be easily connected after
installation.
Cut the sealing tape in accordance with
the built-in opening.
Stick the sealing tape succinct on the
appliance side to which the door
opens. Insert the appliance into the
built-in opening until the stop plate (A)
abuts the furniture.
Make sure that the stop plate lines up
properly with the top of the built-in
opening.
Screw the appliance door with the furniture door
Screw the appliance door with the furniture doorScrew the appliance door with the furniture door
Screw the appliance door with the furniture door
NOTE
NOTENOTE
NOTE:
::
:
Follow below instruction for connecting the furniture
door with the freezer and fridge appliance door.
First remove the caps of the bores on the outer edg-
es of the appliance doors.
Thereon the sliding hinge brackets have to be fixed.
Separate the parts b, c and d of part a.
In consideration of the shown distanc-
es, and in accordance with the appro-
priate door holes, hold the guide (a) at
the inside of the furniture door and
mark the positions of the drill holes.
After drilling, fix the guide with the
screws provided.
Insert the cover (c) until it clicks in the
guide (a).
Fully open the appliance and furniture
door and join them together. Slide the
bracket (b) in the guide (a) and mark
the drill holes. Remove the bracket and
drill Ø 2 mm holes with about 8 mm
distance to the outer door edge. Put the
bracket on again; secure it with the
screws provided.
If an aligning of the furniture door is
necessary, use the slot spacing. Check
if the door is arranged vertical as well
as horizontal, so that a smooth opening
and closing of the door is ensured.
Insert the cover (d) until it clicks on the
angle (b).
Fasten the appliance in the
Fasten the appliance in theFasten the appliance in the
Fasten the appliance in the
built
builtbuilt
built-
--
-in
inin
in
opening
openingopening
opening
Use the two supplied security angles to stabilize the
appliance. Attach the angles between the two doors on
the appliance and on the side of the furniture. Fix the
angle of the hinge-side in combination with the hinge.
Adjust the proper position of the angles by sliding them
in the screw-openings to the right/left until they meet the
sides of the built-in furniture.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior to fi
Prior to fiPrior to fi
Prior to first use
rst userst use
rst use
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
After transport, the appliance should be left standing
upright for about 4 hours before connecting to the
power supply. Nonobservance could lead to malfunc-
tion of the cooling system and causes an appliance
breakdown.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter “Cleaning and Maintenance”.
Starting the appliance
Starting the applianceStarting the appliance
Starting the appliance
Connect the appliance to the power supply.
Operate the temperature control. See also the
following section "Settings".
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bomann DTE 338 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bomann DTE 338 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info