Blueair 500/600 Series 3
Getting started
General safety instructions
The Blueair 500/600 Series air purier is an electrical appliance. Please
read the safety instructions before use and take the necessary precautions
to reduce the risk of re, electric shock or injury. The Blueair Limited
Warranty applies only if the unit is used according to these instruc-
tions.
• Use the grounded three-prong power cable provided with your
Blueair unit. The plug ts into a grounded three-prong outlet. Do
not alter the plug in any way.
• Use the cable provided to plug the Blueair unit directly into an
appropriate electrical outlet (please refer to the voltage label on
your unit). The cable is packaged beneath the unit.
Placement
Place the unit in a location that allows air to circulate freely in, out and
around the unit. The minimum acceptable distance from another object
is 4˝ or 10 cm. Use only genuine Blueair lters. Do not place the unit:
Directly on or against soft furnishings, such as bedding or curtains.
Near wet areas, such as bathrooms or laundry rooms, where it may come into
contact with water.
Near sources of heat, such as radiators, fireplaces or ovens.
Outdoors.
Settings*
Plug the cable into a grounded three-prong wall outlet and turn on your
Blueair unit. The blue light-emitting diode indicates that the unit is working.
Set the control knob to maximum speed, which is recommended for fast
initial cleaning, daytime use, or very polluted air. After a few minutes,
adjust the control to the desired speed. Minimum speed is generally
recommended for nighttime use.
* For Blueair E Series units (250E, 450E, 550E, 650E), please refer to the separate sheet included with your unit for instructions on settings.
