518202
13
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
13
EN
the programme will turn on.
C
Ifnoprogrammeisstartedornokeyis
pressed within 1 minute during programme
selection process, the machine will switch to
Pause mode and the illumination level of the
temperature, speed and loading door indicator
lightswilldecrease.Otherindicatorlightsand
indicatorswillturnoff.OncetheProgramme
Selectionknobisrotatedoranybuttonis
pressed, indicator lights and indicators will turn
on again.
Child Lock
Usechildlockfunctiontopreventchildrenfrom
tampering with the machine. Thus you can avoid
any changes in a running programme.
C
IftheProgrammeSelectionknobisrotated
when the child lock is active, the lights on the
1
st
and 2
nd
auxiliaryfunctionbuttonswillblink
3 times. The child lock does not allow any
change in the programmes and the selected
temperature, speed and auxiliary functions.
C
Even if another programme is selected with
theProgrammeSelectionknobwhiletheChild
Lock is active, previously selected programme
will continue running.
C
When the Child Lock is active and the
machine is running, you can switch the
machine to Pause mode without deactivating
theChildLockbyturningtheProgramme
SelectionknobtoOn/Offposition.When
youturntheProgrammeSelectionknob
afterwards, the programme will resume.
To activate the Child Lock:
Press and hold 1
st
and 2
nd
Auxiliary Function
buttonsfor3seconds.Thelightsonthe1
st
and 2
nd
AuxiliaryFunctionbuttonswillflashwhileyoukeep
thebuttonspressedfor3seconds.
To deactivate the Child Lock:
Press and hold 1
st
and 2
nd
auxiliaryfunctionbuttons
for 3 seconds while any programme is running. The
lights on the 1
st
and 2
nd
AuxiliaryFunctionbuttons
willflashwhileyoukeepthebuttonspressedfor3
seconds.
C
Inadditiontothemethodabove,todeactivate
the Child Lock, switch the Programme
SelectionknobtoOn/Offpositionwhenno
programme is running, and select another
programme.
C
When the power is restored after a power
failure or after your machine is unplugged
and plugged in again, the Child Lock will not
bedeactivatedwhenthemachineresumes
operating.
Progress of programme
Progressofarunningprogrammecanbefollowed
fromtheProgrammeFollow-upindicator.Atthe
beginningofeveryprogrammestep,therelevant
indicator light will turn on and light of the completed
step will turn off.
You can change the auxiliary functions, speed
and temperature settings without stopping the
programme flow while the programme is running.
To do this, the change you are going to make must
beinastepaftertherunningprogrammestep.If
thechangeisnotcompatible,relevantlightswill
flash for 3 times.
C
Ifthemachinedoesnotpasstothespinning
step,RinseHoldfunctionmightbeactive
ortheautomaticunbalancedloaddetection
systemmightbeactivatedduetothe
unbalanceddistributionofthelaundryinthe
machine.
Loading door lock
There is a locking system on the loading door of
the machine that prevents opening of the door in
caseswhenthewaterlevelisunsuitable.
Loading door light will start flashing when the
machine is switched to Pause mode. Machine
checksthelevelofthewaterinside.Ifthelevelis
suitable,LoadingDoorlightilluminatessteadily
within1-2minutesandtheloadingdoorcanbe
opened.
Ifthelevelisunsuitable,LoadingDoorlightturns
offandtheloadingdoorcannotbeopened.If
youareobligedtoopentheLoadingDoorwhile
theLoadingDoorlightisoff,youhavetocancel
the current programme; see "Canceling the
programme".
Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthe
machine to pause mode while a programme is
running. The light of the step which the machine
isinstartsflashingintheProgrammeFollow-up
indicatortoshowthatthemachinehasbeen
switched to the pause mode.
Also,whentheloadingdoorisreadytobeopened,
LoadingDoorlightwillalsoilluminatecontinuously
in addition to the programme step light.
Changing the speed and temperature
settings for auxiliary functions
Dependingonthesteptheprogrammehas
reached, you may cancel or activate the auxiliary
functions; see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
C
Ifnochangeisallowed,therelevantlightwill
flash for 3 times.
Adding or taking out laundry
PresstheStart/Pausebuttontoswitchthe
machinetopausemode.Theprogrammefollow-
up light of the relevant step during which the
machine was switched into the pause mode will
flash.
WaituntiltheLoadingDoorcanbeopened.Open
theLoadingDoorandaddortakeoutthelaundry.
ClosetheLoadingDoor.Makechangesinauxiliary
functions, temperature and speed settings if
necessary.PressStart/Pausebuttontostartthe
machine.
Canceling the programme
To cancel the programme, turn the Programme
Selectionknobtoselectanotherprogramme.
Previousprogrammewillbecanceled.End/
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Blomberg WNF 7221 WE20 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Blomberg WNF 7221 WE20 in de taal/talen: Duits, Engels, Italiaans, Portugees als bijlage per email.

De handleiding is 3,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info