7
2. Connect the drain hose securely to the
water drain connection.
3. Lay and connect the drain hose to the
drainage.
4. Secure the drain hose against slipping
when hanging it over the sink or tub.
Electrical connection
Connect the dryer to a properly installed
earthed outlet, protected by a fuse of
adequate capacity.
Important Advice
• The connection must conform to the
applicable regulations in your country and
of your local Electricity Board.
• The power cable plug must be acces-
sible after installation.
• For a firmly fixed connection a master
switch with at least 3 mm contact clear-
ance must be used.
• Tension and safeguarding of the dryer
can be found on the type plate (on the
inner door of the model). Note down the
applianceʼs Model and Identification Num-
ber from the type plate, in case you need
help from customer service.
• The stated voltage must match your
residenceʼs voltage.
• Connection by extension cables or trail-
ing sockets is not permitted.
• If the power cable is damaged, it must
be replaced by an authorised qualified
electrician to avoid risk. Only use the
dryer again after it has been repaired by a
specialist. Risk of electric shocks.
